82515 SPECIAL REPAIRS TO DHANUSH BUILDING AT NAVY NAGAR UNDER AGE (I) NAVY CHENNAI

Amount

Taking down chowkhats with shutters (without taking off shutters from the frame) not exceeding 1.5 sqm each complete all as specified and directed.

Taking down chowkhats with shutters (without taking off shutters from the frame) exceeding 1.5 sqm but not exceeding 4.0 sqm each complete all as specified and directed.

Taking down Shutters of any description exceeding 1 sqm but not exceeding 2 Sqm each complete all as specified and directed.

Taking down and refixing the same opening of door Shutters of any description exceeding 1 sqm but not exceeding 2 Sqm each and including easing and adjusting before fixing of door shutter complete all as specified and directed.

Demolition of Brickwork built in cement mortar, stone/boulder masonry, build in lime mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles complete all as specified and directed.

Material and Labour for Brickwork with fly ash old size bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and directed.

Ditto as in item No. 6 but for half brick thick walls built in CM (1:4) complete all as specified and directed.

Supply and Fix for Providing and fixing factory made UPVC white colour Sliding window Three track of area n exc 2.00 Sqm each, made of extruded profiles with wall thickness of 2.3mm (±0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm), Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2±0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Note: The unit rate quoted by contractor shall be excluding the glass panes and includes all other connected accessories. Net opening will be measured for payment purpose.

Supply and fix for Factory made fully glazed i.e. glass panes used instead of 5mm thick sheet panels PVC of louvered ventilator of 30 mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour micron complete all as specified and directed

Supply and fix for Powder Coated aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement complete all as specified and directed. Note : Thickness of powder coating not less than 50 micron.

Supply and fix for aluminium wire cloth 0.45mm nominal dia of wire and 1.40mm average width of aperture and fixed with aluminium wire staples complete all as specified and directed.

Supply and fix in repair aluminium wire cloth 0.45mm nominal dia of wire and 1.40mm average width of aperture and fixed with aluminium wire staples/ teak wooden beading complete all as specified and directed.

Supply and fix for 5 mm thick sheet glass figured glass, pin head, obscured or frosted, on one side type and aluminium glazing beads in square not exc 0.50 Sqm in each pane complete all as specified and directed.

Supply and fix for plain sheet glass,5.5mm thick, ordinary quality in square not exceeding 0.5sqm in each complete all as specified and as directed

Supply and fix for plain sheet glass, ,5.5mm thick, ordinary quality in square exceeding 0.5sqm in each complete all as specified and as directed

Supply and fix for 2nd class hard wood Plain, solid, straight, chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified.

Supply and fix for 35 mm thick 2nd class Hard wood rail and style of Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified.

Supply and fix for 35 mm thick 2nd class hardwood factory made Glazed and skeleton fully and partially door shutters, open rebated and prepared to receive glass, gauze, etc. (with sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (a); supplied and fitted to chowkhats complete all as specified.

Supply and fix for solid PVC door frame of size 50mm x 47mm made out of 5mm prelaminated colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specifications & drawings complete all as specified and directed

Supply and fix for factory made solid PVC moulded door shutter, 28 to 30mme thick (stiles), with 2,4 or 6 raised panel designed with 4mm thick moulded PVC sheet on front face and 4mm plain colour PVC sheet on back face as per specification and drawing complete all as specified and directed

Supply and fix for 75mm size, Butt hinges, heavy weight, SS, and fixed complete all as specified and directed

Supply and fix for 125 mm size, Butt hinges, heavy weight, SS, and fixed complete all as specified and directed

Supply and fix aluminium handles cast type anodised for 100 mm complete all as specified and directed

Supply and fix aluminium handles cast type anodised for 150 mm complete all as specified and directed

Ditto- all as per item No- 24 above but fixed in repair complete all as specified and directed.

Supply and fix for aluminium, anodised barrel tower bolts of extruded section and fixed for 150 mm length complete all as specified and directed

Supply and fix for aluminium, anodised barrel tower bolts of extruded section and fixed for 200 mm length complete all as specified and directed

Ditto- all as per item No- 27 above but fixed in repair complete all as specified and directed.

Supply and fix for Aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed of length of bolt 300mm complete all as specified and directed

Ditto- all as per item No-29 above but fixed in repair complete all as specified and directed.

Supply and fix for 25mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination and 6mm thick 1st class teak wood beading around the shutters and any other balance portion 1mm thick decorative tape fixed with fevicol, fixed with screws to timber frame work with SS angles cleats for shelves etc complete all as specified and as directed.

Supply and fix for 75mm size, Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified and directed

Supply and fix for Hasp and staple, safety type, aluminium anodised including bolt to hinge plate and fixed with screws for 150 mm size complete all as specified and as directed.

Supply and fix for WPC (Wood Polymer Composite)18/19 mm thick board ( 600 Density) with coloured PVC Frame with coloured Pre Laminated shutter as approved design and shape as in PVC kitchen cabinets cupboards with SS angles cleats etc as per work carried out through Manufacturer Instruction complete all as specified and as directed.

Supply and fix for WPC (Wood Polymer Composite) 6 mm thick board (600 Density) with PVC white coloured sheet as approved design and shape as in PVC kitchen cabinets cupboards with SS angles cleats etc as per work carried out through Manufacturer Instruction complete all as specified and as directed.

Supply and fix for CP decorative type Brass handles, cast type, polished bright handles 75mm long fixed to plywood or frame complete all as specified and directed

Supply and fix for cupboard Brass knobs 35-40mm dia fixed with screwed and washer of mild steel complete all as specified and directed

Supply and fix for magnetic and connected plate to shutter and frame as per sample complete all as specified and directed

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid and bedded and pointed in any mortar complete all as specified and directed.

Material and Labour for machine cut kota stone slab flooring 20 - 25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete and including 15mm thick screed bed in CM 1:6 complete all as specified and directed

Material and Labour for 18-20mm machine cut Pre- polished kota stone slab in single piece with round nosing with three numbers of serration as in treads of steps for staircase laid over cement screed bed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified and as directed by EIC over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed

Material and Labour for machine cut Pre polished kota stone 15-18 mm thick (single piece in raiser of steps), skirting, dado and pillar laid and jointed with grey cement slurry including cutting and mirror polishing over and including 10 mm thick screed bed in CM 1:4 complete all as specified and directed

Material and labour for 20 mm thick machine cut, Granite stone slab (of any type)(table rubbed and polished) in steps, jambs, pillars, windows, cills, cooking plate forms and like in cement mortar 1:4 bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing types and making mould on edges & including cutting for the shape for SS Sink and including 15mm thick screed bed in CM 1:6 complete all as specified and directed

Ditto all as per item no-43 above but for15mm thick Granite on skirting and including 10 mm thick screed bed in CM 1:4 complete all as specified and directed

Material and Labour for 18-20 mm thick of green Marble (table rubbed and polished) laid and jointed in flooring strips, step type window cills and jambs etc over and including 15mm thick screed bed/ backing coat in CM 1:6 complete all as specified and directed

Supply and fix rotational moulded polyethylene water storage tank, triple layer and light colour of 500 ltrs capacity (cylindrical vertical with closed top) including dismantling of existing tank including all fittings i.e. tank nipple, of 20mm dia Ball brass valves, high pressure, with polythene float and fly nut etc complete all as specified and directed.

Supply and fix rotational moulded polyethylene water storage tank, triple layer and light colour of 250 ltrs capacity (cylindrical vertical with closed top) including dismantling of existing tank including all fittings i.e. tank nipple, of 20mm dia Ball brass valves, high pressure, with polythene float and fly nut etc complete all as specified and directed.

Material and Labour for Providing & injecting ATT chemical at the point of contact of wood work by chemical emulsion (in oil or kerosene based solution) at the rate 0.5 liters/holes by drilling 6mm dia holes at a downward angle of 45 degree at 150mm center and sealing the same complete all as specified and directed.

Material and Labour for Providing & injecting ATT chemical at the point of contact of voids in masonry wall and floor joins or perimeter of rooms using chemical emulsion one litre per hole, at 300mm intervals including drilling holes at 45 degree and replugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors complete all as specified and directed. Note:- Measurement to be consider only perimeter of wall and depth up 500 mm

Material and Labour for Providing and injecting chemical emulsion for Post on structural AntiTermite Treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 litres per sq.m of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc. complete all as specified and directed. Note:- Measurement to be consider only perimeter of wall and depth up 500 mm

Material and Labour for Removal of plant growth by injection with chemical glyphospate solution (4% concentration) of 20ml or till refuse by cutting or injection in stem of plants or roots at 30mm deep. The area shall then be sprayed with solution 25ml glyphosphate ( 4% concent) diluted with 1 ltr of water. All roots / plants shall be removed completely and making good with cement concrete/mortar and finished the surfaces matching to existing surfaces of wall / floor with acrylic paint all as directed by EIC. etc sectional area not exceeding 0.10 Sqm each complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for(reinforcement cut as required to facilitate) complete all as specified and directed

Material and Labour for mild steel TMT bars 10mm dia and over cut to length bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire(annealed ) n less than 0.9mm dia or securing with clips and including welded with new reinforcement to existing reinforcement and grouting of beams/ columns/lintels etc complete all as specified and directed

Material and Labour for reinforced cement concrete (nominal mix) Type B-1 1:2:4 (using 20mm graded stone aggregate) as in as slab suspended slab, chajjas, facia, shelves for cooking platform, platform and the like complete all as specified and directed

Material and Labour for formworks to sides and soffits of shelves, cooking platform and the like rough finished surface of concrete complete all as specified and directed

Material and Labour for Steel work in tubular/hollow sections of trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S.1161-1979 grade St.-240 complete all as specified and directed.

Supply and fix Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet, 0.50mm thick of any colour having tensile strength of 550 Mpa, as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed.

Material and Labour for Ready Mix Micro concrete of 25 to 40 mm thick consistency of Renderoc S2 or Renderoc RG of FOSROC in consistency a batch of 25kg of Renderoc mixed with water n exc 3.50 Ltrs and mixed with 1 kg of polymer acrylic fibers all as per manufacturer's instructions and finished the surfaces even and smooth with 10mm thick rendering in CM 1:4 complete all as specified and directed by Engr-in-Charge including erecting necessary scaffolding (UP to G+5 Story ) Work carried out through FOSROC applicator only Note:- The following stages (a) to (d) are included of Materials and labour will be carried out .:-

(a) Taking out existing unserviceable plaster loose/unsound weaken cement concrete of any description and in any position from existing surface of RCC roof slab/beam/column/RCC facia /RCC chajja with power driver of pneumatic chisel after cleaning of concrete/plastered particles and Removing corrosion and all loose scales rust etc from the visible reinforcement and cleaning the steel reinforcement properly.

(b) Applying one or more coat of NITO ZINK primer of FOSROC or equivalent ZINK primer of CHEMISTIC/WEBAC on visible reinforcement surface. Several time prior to placing, the concrete substrates should be saturated with clean water

(C) After drying of water to applying bonding agent of modified styrene butadiene emulsion (SBR bonding agent i.e. Nito bond SBR Latex or Nito bond EP of FOSROC) in proportion 1 (Nito bond SBR latex): 1 (water): 3 (OP cement) by volume with the brushing etc to bind New CM plaster / Polymer Modified plaster / Concrete / Screed concrete with old surface..

(d) Providing fiber mesh jali fixed to existing RCC roof slab/beam/column/RCC facia /RCC chajja as per directed by Engr-in- Charge

Taking down cement Plaster, any description, on brick walls or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

Material and Labour for 15mm thick Rendering in two coats of ( 10 mm thick on first coat and 5mm thick in second coat) on fair faces of brick work or concrete surfaces in CM (1:4) using with WPC @ 3% by wt of cement on second coat complete all as specified and directed. (Note : WPC shall be measured and paid separately)

Supply only Integral water proofing compound complete all as specified.

Material and Labour for rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM (1:6) finished even and smooth (without using extra cement) complete all as specified and directed

Material and Labour for 10 mm thick rendering in CM (1:3) on ceiling on soffits and finished even and smooth (without using extra cement) complete all as specified and directed

Material and Labour for preparation of newly plastered / concrete surfaces and applying two coats of oil bound distemper over a coat of primer over 3mm thick Birla wall care putty complete all as specified and directed.

Material and Labour for complete removal of existing surfaces including washing / rubbing down with water of wall and applying two coats of oil bound distemper/emulsion over coat of alkali resistant primer including chalk whiting 3mm thick Birla wall care putty and including necessary scaffoldings as reqd etc complete all as specified and directed .

Material and Labour for Preparation of new surfaces of wall and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. and over 3mm thick exterior Birla wall care putty in two layers all as per manufacturer instruction and including necessary scaffoldings upto G+4 etc complete all as specified and directed.

Material and Labour for complete removal of existing treatment on walls including washing down, rubbing down and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. and over 3mm thick exterior Birla wall care putty in two layers all as per manufacturer instruction and including necessary scaffoldings upto G+4 etc complete all as specified and directed.

Material and labour for preparation new plastered surfaces plastered and applying three coat of white wash on ceiling complete all as specified and directed.

Material and labour for preparation old decorated surfaces and applying two coats of white wash on ceiling complete all as specified and directed.

Material and labour for preparation of new steel surfaces of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of zinc primer complete all as specified and as directed.

Material and labour for preparation of new wooden surfaces of any description over 10 cm width or girth not otherwise described and applying two coats of Synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Material and labour for preparation of old wooden painted surfaces of any description over 10 cm width or girth not otherwise described and applying one coats of Synthetic enamel paint complete all as specified and as directed.

Dismantling floor hearth or wall tiling including cement mortar bedding and rubbish off the premises complete all as specified and directed.

Material and Labour for non- skid pin handed ceramic coloured tiles 7 to 8mm thick (square/Rectangular) area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:6.complete all as specified and directed

Material and Labour for glazed ceramic coloured design tiles 450x300mm x 7mm thick in vertical surface etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including backing coat of CM 1:4 10 mm thick etc complete all as specified and directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. complete all as specified and directed.

Material and labour for non skid ceramic tiles 10 mm thick (square/ rectangular) area of each tile exc. 0.36 sqm in floors etc., set & jointed in neat cement slurry & pointed in white or coloured of approved shade of double charged, cement to match including 15 mm thick screed bed in CM 1:6. complete all as specified and directed

Ditto - as above item No- 77 but as in skirting/ dado including backing coat of CM 1:4 10 mm thick etc complete all as specified and directed.

Taking up & down steel tubing bore of pipe 15 mm connections, including cleaning and removal to store complete all as specified and directed.

Ditto as in item No. 79 but for 20 mm dia complete all as specified and directed.

Ditto as in item No. 79 but for 25 mm dia complete all as specified and directed.

Supply and Fix 3-layer PP-R Polypropylene random copolymer concealed pipes SDR 7.4 (PN 16) UV stabilized and composite pressure pipes including all Crimp type internal sealing Plastic metal Composite fittings (such as elbows, tees, reducers, couplers, short pieces, connectors, etc.) and hooks (in case of concealed pipe work)/ clamps (in case of exposed pipe work) etc complete all as specified. having thermal stability for hot & cold water supply including all PP-R plain & brass treaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc complete all as specified and directed.

Ditto as in item No. 82 but for 20 mm outside dia complete all as specified and directed.

Ditto as in item No. 82 but for 25 mm outside dia complete all as specified and directed.

Ditto as in item No. 82 but for 32 mm outside dia complete all as specified and directed.

Ditto as in item No. 82 but for 40 mm outside dia complete all as specified and directed.

Ditto as in item No. 82 but for 63 mm outside dia complete all as specified and directed.

Cutting chases, pinning in making good to facings for inserting galvalume sheet into the brick wall where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good to the existing surface, cutting not exceeding 10 cm girth complete all as specified and directed.

Supply and fix PPR Gate valves (brass insert) as per requirement of site fixed to PPR pipes complete all as specified and directed.

Ditto as in item No. 84 but for 20 mm outside dia complete all as specified and directed.

Ditto as in item No. 84 but for 25 mm outside dia complete all as specified and directed.

Ditto as in item No. 84 but for 32 mm outside dia complete all as specified and directed.

Ditto as in item No. 84 but for 40 mm outside dia complete all as specified and directed.

Ditto as in item No. 84 but for 63 mm outside dia complete all as specified and directed.

Supply and fix in repairs EWC Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) but plastic water closet seat, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminized hinging device complete all as specified and directed.

Supply and fix in repairs vitreous china water closet Orissa pattern, size 580x440mm white with integral foot rests (excluding flushing cistern and flush pipe).complete all as specified and directed.

Supply and fix in repair of low level flushing cistern 10 ltrs capacity body moulded from virgin quality high impact poly propylene and functional parts moulded from engineering grade ABS nylon complete including brackets and flush pipe of reqd size and 15mm bore 450mm long PVC connection all as directed.

Supply and Fix Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

Supply and fix for PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed.

Supply and fix in repairs CP Angle/ stop valve 15mm dia of chromium plated fancy type any colour high pressure screwed for iron pipe and fixed complete all as specified and directed.

Supply and fix in repairs Fancy type CP stop valve 15mm dia cast copper alloy, chromium plated fancy type with long shank and cup (concealed type) screwed down high pressure with half turn type knob/capstan heads, screwed both end for iron pipe or for unions and fixed complete all as specified and directed

Supply and fix in repairs 15mm bore dia chromium plated fancy type Bib taps, with knob/ capstan head of fancy type with long shank, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

Supply and fix in repairs Wash basins, vitreous china (flat back or angle back type) of 550x400mm, including 32mm waste coupling , cutting for and pinning in ends of brackets or erecting stand inclusive of waste pipe complete all as specified and directed.

Supply and fix pillar taps, chromium plated fancy type, with capstan heads, chromium plated, screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe of bore of pipe 15mm fixed complete all as specified and directed.

Supply and fix in repairs tubular towel rail, 20mm dia, 'D' type, 60cm long between flanges made of brass chromium plated complete all as specified and directed.

Supply and fix Fibre glass shelf assembly and approved complete all as specified and directed.

Supply and fix Gratings round or square with or without waste hole of PTMT or chromium plated 125mm size complete all as specified and directed.

Supply and fix in repair SS Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed

Supply and fix in repair 125 mm dia Fancy type CP shower rose all as specified and as directed by Engineer-in-Charge complete all as specified and directed.

Supply and fix for PVC waste pipe of 32 mm dia for sink and WHB complete all as specified and directed

Supply and fix for 50mm dia bore pipe low density LDPE fixed to wall, ceiling or in floors etc complete all as specified and directed.

Supply and fix in repair PVC (SWR) floor trap, 75mm dia plain with grating including jointing with solvent cement complete all as specified and directed.

Supply and fix in repair PVC pipe 110mm dia single socketed in any length with rubber joints fixed to walls with Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed.

Supply and fix in repair PVC pipe 75mm dia single socketed in any length with rubber joints fixed to walls with Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed.

Supply and fix for PVC (SWR) bends any radius bore of dia 110mm with access door complete all as specified and directed.

Supply and fix for PVC (SWR) bends/ Shoes any radius bore of dia 110mm complete all as specified and directed.

Supply and fix for 75mm PVC (SWR) bends any radius bore of dia with access door complete all as specified and directed.

Supply and fix for 75mm PVC (SWR) bends any radius bore of dia complete all as specified and directed.

Supply and fix for 110 mm PVC (SWR) branch piece, Single Tor Y) equal or unequal of with access door complete all as specified and directed.

Supply and fix for 75 mm PVC (SWR) branch piece, Single Tor Y) equal or unequal of with access door complete all as specified and directed.

Supply and fix for 110 mm PVC (SWR) vent cowl complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided and including removing of PCC tiles and existing roof treatment etc complete all as specified and as directed.

Material and Labour for PCC Padding (1:2:4) type B-0 (12.50 mm graded aggregate) thickness as specified to bring uniform slope in floors/ roof slab with addition of integral waterproofing compound Conplast WL Xtra @ 200ml per bag of cement and polypropylene fibres @ 900 grams per cum of concrete. The concrete shall be laid in panels of not more than 200sqm and groove cutting of 6mm x 15mm to be taken at every 5m x 5m and filled with Polyurethane elastomeric sealant Nitoseal PU 40 and coving at the junction of slab and vertical offsets with Cement Mortar 1:4 and admixed with Nitobond SBR at dosage of 1.5 Ltrs per 50kg cement as per manufacturer's including over apply with brushing neat cement slurry with 3.0kg/Sqm after cleaning of existing roof top surface with water etc complete all as specified and directed. Note :- Integral waterproofing compound Conplast WL Xtra, polypropylene fibres , Polyurethane elastomeric sealant Nitoseal PU 40 & Nitobond SBR will be measured paid separately.

Material and Labour for 10mm thick rendering on roof top surfaces in CM 1:3 with using with integral waterproofing compound Conplast WL Xtra @ 200ml per bag of cement finishing the even and smooth surface etc complete all as specified and directed. Note :- Integral waterproofing compound Conplast WL will be measured paid separately.

Supply only Integral waterproofing compound Conplast WL will be measured paid separately.

Supply only Polypropylene fibres complete all as specified and directed.

Supply only Polyurethane elastomeric sealant Nitoseal PU 40 complete all as specified and directed.

Supply only admixed with Nitobond SBR complete all as specified and directed.

Material and Labour for providing & applying 100% solids content, 2 component, solvent free, spray applied elastomeric seamless Pure Polyurea Membrane Fosroc Polyurea WPE at a thickness of 1.5mm in two layers at a coverage rate of 1.5 litres / sqm. Spray applied waterproofing shall utilize high-pressure, heated plural component spray proportioning equipment and applied in a cross directional method to the total roof slab and parapet wall height. Complete work carried out through Fosroc /equivalent authorised applicator as mentioned in PS and as approved by AGE(I) The cured membrane shall have the following properties (i) Solids by Volume : 100%, (ii) Volatile organic compounds : 0 g/litre (iii) Viscosity : A ISO = 1000mPas and B AMINE 1200 mpas (iv) Tensile strength ASTM D412 : >19 MPa (v) Tear Resistance ASTM D624C : 90N + 4 N/mm (vi) Elongation ASTM D412 : >300% (vii) Shore D ASTM D2240 : 46 (viii) Abrasion (1kg,H22 wheels) ASTM D4060: 36 mg /1000 cycles , Abrasion (1kg,CS17 wheels) DIN EN ISO 5470 : 10 mg /1000 cycles (ix)Service temperature ASTM D4060: -30°C to +100°C

Before applying of Polyurea WPE under mentioned preparations has to be done. (x) The Surface shall be free from sharp projections & undulation, ridges or troughs, etc. The substrates shall be freed of laitance, loose or friable materials, debris and all contaminants by mechanical means preferably using light grinding. (xi) Supply and application of solvent free epoxy resin primer Nitoprime 31 @ min 0.25 kg/Sqm on horizontal surfaces and on verticals to the total height of the parapet wall. Sprinkle dry sand over the primer coat for better adhesion of Polyurea coating.

Material and Labour for Providing and applying two coats of Dekguard PU/ Nitoproof UR Top coat @ minimum 100 microns dry film thickness in two coats over the Polyurea waterproofing using rubber squeegee and back rolled with lambs wool roller. Complete Item carried out through Fosroc Manufacturer

Material and Labour for 75mm thick PCC (1:2:4) type B-1 (20 mm graded aggregate) as in plinth protection and finishing the even and fair with out using extra cement etc and including cutting of construction joints every 2.5 mtr and filled with sealing compound grade B etc complete all as specified and directed.

Supply and Fix in repair stainless steel sink 1mm thick without drainage board for kitchen with plugs, washers and wastes coupling 40mm; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x 420 mm, bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed by Engineer-in-Charge.

Supply and Fix for bracket/holders suitable for drapery 28mm dia rods complete all as specified and as directed

Supply and Fix for 28 mm dia aluminium powder coated tubular drapery rod with and including side ball finials, matching rings made from high grade ABS plastics complete all as specified and as directed.

Supply and Fix for Kitchen cabinets of stainless steel accessories grade 202 as mentioned below complete all as specified and as directed. Make:- Godrej Interio / Zuari / Kitchen Concepts / Dream Kitchens / Kitchen Crafts

Cutlery basket of size 19''x20''x4'' complete all as specified and directed.

Cup and saucer basket of size 19''x20''x6'' complete all as specified and directed.

Plain basket of size 19''x20''x8''

Supply and fix for telescopic channel of size 450mm to 560mm of load per 45 kg/cm sq as per sample approved by EIC complete all as specified and directed

Supply and fix for 80mm Auto SS hinges of crank 0 degree to 90degree, fixed with screws to plywood or frame work as per sample approved by EIC complete all as specified and directed

Removal of building materials/debris from 1.5mtr to a distance of out side of 5.0 KM etc complete all as specified and directed.

Taking down DB/main switch of any size and making good disturbed surface of wall/floor complete all as specified.

Taking down carefully sub-main wiring of any description and making good to their disturbed surfaces to match the existing all as specified and as directed by EIC.

Material and labour for sub main wiring (concealed) complete with two single core 6 Sqmm FRLS PVC insulated unsheathed stranded copper conductor cable drawn through in and including 25 mm dia rigid non-metallic PVC conduit heavy grade and conduit accessories including 6 Sqmm FRLS PVC insulated unsheathed stranded copper earth cable connected to common earth dolly complete and including cutting chasing in walls for concealed wiring using machine cutting and making good the disturbed surface all as specified and directed. Note: 3 run of 6 sqmm & one run of PVC conduit shall be measured as single unit

Material and labour for sub main wiring (concealed) complete with two single core 4 Sqmm FRLS PVC insulated unsheathed stranded copper conductor cable drawn through in and including 20 mm dia rigid non-metallic PVC conduit heavy grade and conduit accessories including 4 Sqmm FRLS PVC insulated unsheathed stranded copper earth cable connected to common earth dolly complete and including cutting chasing in walls for concealed wiring using machine cutting and making good the disturbed surface all as specified and directed. Note: 3 run of 4 sqmm & one run of PVC conduit shall be measured as single unit

Taking down carefully any type point wiring (light, fans, socket etc) complete including battens and fittings such as switch, ceiling rose, light fittings, regulators, socket, etc. and making good disturbed surface of wall/floor, etc. complete all as specified and as directed.

Material and labour for point wiring (concealed) on walls and surface on ceiling complete with FRLS PVC insulated unsheathed 1100 Volts grade, conforming to IS-694, 1.5 sq mm (nominal area) multi stranded copper conductor cable drawn though in and including non metallic medium grade rigid PVC conduit heavy grade accessories, ISI marked, 19/20 mm dia including all accessories, concealed in walls by cutting chases using machine and making good the disturbed surface, with and including suitable 1.5 sq mm copper earth continuity wire connected to earth dolly complete for the following complete all as specified and as directed.

One light point controlled by one switch

One fan point controlled by one switch

One exhaust fan point controlled by one switch.

One bell/ buzzer point controlled by one push switch.

One switch socket outlet modular type 3 pin 6 amp on same board.

One light point controlled by one two way switches, with cables

All as per item No 136 above but 1.5 sq mm cable size and 1.5 sq mm earth continuity wire for one 3 pin socket outlet, 6 amps on independent board.

All as per item No 136 above but 2.5 sq mm cable size with 2.5 sq mm earth continuity wire for one 3 pin socket outlet, 16 Amps on independent board.

Supply and Fix Switch modular type, single pole one way 6 Amps complete all as specified and as directed.

Supply and Fix 0-4 step, one module, modular type electronic regulator for ceiling fan 1200 mm sweep, 240 volts, 100 Watts hum free single pole, complete all as specified and as directed.

Supply and Fix bell push switch, modular type, 6 Amps, 1 module, 250 volts all as specified and as directed .

Supply and fixing calling bell Ding Dong type, AC, single pole one way 230 volts complete all as specified and as directed. .

Supply and Fix socket modular type 6 Amps multistranded 240 volts all as specified and as directed.

Supply and Fix switch modular type single pole two way 6 amps 250 volts, all as specified and as directed.

Material and labour for ceiling rose, surface Bakelite, 65 x 50 mm, two to three terminals all as specified and as directed.

Supply and Fix switch modular type 16 Amps, 240 volts all as specified and as directed.

Supply and Fix socket modular type 16 Amps, 3 pin combine, 2 module,240 volts all as specified and as directed.

Supply and Fix Lamp Holder, PVC/Polycarbonate type with cord gird cap all as specified and as directed.

Supply and Fix for Modular white cover plate with frame,1 or 2 Module and Modular Metal flush box, 1 or 2 Module complete all as specified and directed.

Supply and Fix for Modular white cover plate with frame,3 Module and Modular Metal flush box 3 Module complete all as specified and directed.

Supply and Fix for Modular white cover plate with frame,6 Module and Modular Metal flush box 6 Module complete all as specified and directed.

Supply and Fix for Modular white cover plate with frame,8 Module and Modular Metal flush box 8 Module complete all as specified and directed.

Supply and Fix wall mounted LED batten with decorative end cap of capacity 4feet 20W or nearest higher wattage, 2500 lm, 6500 K suitable for Surface, Wall & Conduit mounting complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size and lamp complete all as specified and directed internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed . (Make : C&S Cat Part No. LTTB4F20WLED/W or equivalent as mentioned in PS)

Supply and fix LED light fitting 2 feet,10 W or nearest higher wattage, 230v, suitable for Surface, Wall & Conduit mounting, with extruded aluminium housing, with integrated LED driver, etc. complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and as directed. (Make : C&S Electric Cat Part No. LTTB2F10WLED/W or equivalent as mentioned in PS)

Supply and Fix sheet metal enclosures for DB's for incorporating MCBs, VTPN, 6 way, IP-43 with metal double door with 200 amps rated busbar, 415 volts, as per IS-8623 including taking down the old unserviceable TPN DB, all as specified and as directed.

Supply and Fix MCCB TPN, 100 Amps, breaking capacity 16 KA, 415 volts, 50 HZ including making necessary incoming and outgoing electrical connection with suitable size of copper lugs etc. complete all as specified and as directed.

Supply and Fix sheet metal enclosures for SPN DB's with metal double door for incorporating MCBs,IP-43 , 8 way with 200 amps rated busbar, 240 volts, as per IS-8623 all as specified and as directed.

Supply and Fix MCB SPN, 40 Amps, breaking capacity 10 KA 'C' curve confirming to IS/IEC 60898-1 2002,integrated label holder, sliding bottom clamp , IP 20 protected terminal, sliding shutters, 240 volts, 50 HZ including making necessary incoming and outgoing electrical connection with suitable size of copper lugs etc complete all as specified and as directed.

Supply and Fix MCB SP 40 Amps, breaking capacity 10 KA 'B' curve confirming to IS/IEC 60898-1 2002,integrated label holder, sliding bottom clamp , IP 20 protected terminal, sliding shutters, 240 volts, 50 HZ including making necessary incoming and outgoing electrical connection with suitable size of copper lugs etc complete all as specified and as directed.

Supply and Fix MCB SP 10-32 Amps, breaking capacity 10 KA 'B' curve confirming to IS/IEC 60898-1 2002,integrated label holder, sliding bottom clamp , IP 20 protected terminal, sliding shutters, 240 volts, 50 HZ including making necessary incoming and outgoing electrical connection with suitable size of copper lugs etc. complete all as specified and as directed.

Supply and fix exhaust fan 300mm sweep, heavy duty , single phase, Rust proof body and blades, double ball bearing with noiseless operation, 1400 RPM complete with louvers including making suitable opening at suitable height, and provision of nuts and bolts on the wall for fixing the exhaust fan complete all as specified and as directed . Note: The rate quoted shall be deemed to be inclusive of cuttings of holes in PCC or through bricks walls of appropriate dia suitable making niche for 300 mm sweep exhaust fan and making good in cement mortar 1:3 or cement concrete 1:2:4 type B0 as required including making good as per existing surface colour matching of wall including 4 Nos of nut & bolts to fix the Exhaust fan complete all as specified and as directed.

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostat, NRV, connection piece etc. all as specified and as directed.

Material and labour for earthing complete with galvanised steel earth plate electrode 60cm×60cm× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to 4 mm GI wire as earthing lead by means of bolts, nuts, check nuts and washers of copper all as shown in electrical plate No.3 in SSR part 1 connected to earthing test point, including 20 mm GI pipe (Medium grade) for watering and 15 mm GI pipe (Medium grade) for protection of earth wire and etc.. including testing on completion, PCC chambers in PCC1:3:6 type C1, RCC M25 type cover slab 50mm thick with 8mm dia TMT HCR/CRS steel bars at 140mm C/C both way and lifting handle GI funnel & wire mesh, funnel, lugs and charcoal, salt etc all as applicable complete all as specified and as directed by the Engineer-in-Charge.

Material and labour for Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 2mm dia galvanised iron or steel wire all as specified and as directed.

Taking down fan, dismantling blades and removing fan and blades including repair and servicing, painting of ceiling fan complete all as specified and as directed.

Taking down Energy meter and refixing, connection and etc.. complete all as specified and as directed.

Supply and laying LT UG XLPE insulated of size 50 Sqmm 3.5 core 1100 volt grade heavy duty cable multi stranded aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel strip wire or tape and connecting up to the electrical system with suitable size of aluminium lugs complete all as specified and directed.

Excavation in trenches in Soft/loose soil not exceeding 1.5 meter wide and not exceeding 1.5M in depth for laying of cables/pole and getting out of excavated material complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick each, excavated soil in trenches after the pipes have been laid and tested complete all as specified and directed.

Removing excavated soil to a distance not exceeding 50 meter and depositing where directed at a level not exceeding 1.50 meter above the starting point complete all as specified and directed.

Supply and fixing High density poythelyne (HDPE) pipes PN 10 of pressure rating 6kgf/ sq/ m of size 63 mm for cable protection laid in trenches complete all as specified and directed

Banyan Engineers and Contractors

GV Foundations