SPECIAL REPAIR TO ELECTRICAL WIRING AND CONNECTED E/M WORK OF OFFICE BUILDING NO.P-10 PAO (ORs) ARTY/AAC LEKHANAGAR NASIK UNDER GE NASIK ROAD CAMP

Amount

Taking down carefully aluminium point wiring (light, fan, socket, bell or power) complete including all fittings and fixtures, removing, materials from site and making good disturbed surfaces of wall, ceilings etc. complete all as specified and directed.

Material and labour for point wiring using approved colour coding as per IS (Red, Black and Green for single phase circuits), with multi-stranded copper conductor 1.5 Sq. mm nominal cross-sectional area, single core, PVC insulated and unsheathed FRLS cable 1100 volts grade, ISI-694 marked with valid CML No. in and including medium grade, PVC casing & caping and accessories surface on wall/roof/floor etc, ISI marked with valid CML No.(IS-9537-1983 for PVC casing & caping and IS:3419:1976 for accessories), with mild steel/pressed steel sunken boxes( with earth dolly) duly painted with two coats of anti corrosive paint/aluminium paint over a coat of red oxide primer internally, and two coats of black bituminous paint over a coat of red oxide primer externally, covered with modulae plate suitable for fixing Modular switches, sockets and fan regulators etc, including PVC insulated multi-stranded copper conductor 1.5 Sq mm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed. Note :- (i) Modular plates and Steel sunken box included in quotated rates. (ii) Making good the disturbed surface to match with existing surface

All as per item No 2 above but for one light controlled by two switches.

All as per item No 2 but 2/3 pin socket out let 5 Amps with 1.5 Sqmm on same board.

All as per item No 2 above but for bell point.

All as per item No 2 but 2/3 pin socket out let 5 Amps with 1.5 Sqmm on independent board.

All as per item No 2 here-in-before but for 2 in 1 three pin socket outlet 15/25 Amps on independent board with 4 Sqmm cable FRLS copper conductor multistranded including 4 sqmm PVC insulated and unsheathed FRLS copper conductor cable as earth continuity wire complete all as specified and directed.

Supply & Fixing Modular switch,1 way 6A with "light / fan Marking" , 1 module, 230 volts complete all as specified and directed.

Supply & Fixing Modular 16A 1 Way Switch with Indicator , 1 module, 230 volts complete all as specified and directed.

Supply & Fixing Modular 6A Bell Push Switch with Indicator, 1 module, 230 volts complete all as specified and directed.

Supply & Fixing Modular Switch two way 6 Amps, 230 volts complete all as specified and directed.

Supply & Fixing Modular socket 6A 3 Pin Round Socket with Shutter (ISI mark), 2 module, 230 volts complete all as specified and directed.

Supply & Fixing Modular socket 6A/16A 3 Pin Socket with Shutter (ISI Mark), 2 module, 230 Volts complete all as specified and directed.

Supply & Fixing Modular fan regulator flush type 2 Module with 4 Step Regulator 100W (ISI mark), 230 Volts complete all as specified and directed.

Supply & fixing Modular Electronic Bell AC 230 Volts single pole .2 module complete all as specified and directed.

Supply and fix in replacement of ceiling rose surfaces bakelite 65 x 50 mm three terminals including supply and fix PVC plate or square blocks complete all as specified and directed.

M & L in replacement of Rigid non-metallic PVC conduit inclusive of boxes (junction/terminal), inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc 25mm external dia for telephone cable and TV socket concealed in wall by chases cutting and making good the disturbed surface to match with existing surface complete all as specified and directed.

Supply and fix in replacement of distribution board double door, for mounting VPTN MCCB 125A DB double door 12 way having IP:54 protection with door earthing factory made, confirming to IS: 13032 fabricated out of CRCA sheet not less than 1.2 mm thick fitted with DIN channel, with epoxy polyester based powder paint sprayed and backed at high temperature, between powder paint process the sheet steel having to go through the anti-rust conditioning in not less than seven tank process to ensure smooth finish and protection against corrosion atmosphere complete all as specified and directed.. Note: The DBs shall be of same make as MCBs /Isolator. DB shall also be provided with label marking indicating the incoming and outgoing circuits on all way as specified.

Supply and fix in replacement of distribution board double door, for mounting TPN DB double door 12 way IP:54 protection with door earthing factory made, confirming to IS: 13032 fabricated out of CRCA sheet not less than 1.2 mm thick fitted with DIN channel, with epoxy polyester based powder paint sprayed and backed at high temperature, between powder paint process the sheet steel having to go through the anti rust conditioning in not less than seven tank process to ensure smooth finish and protection against corrosion atmosphere complete all as specified and directed.. Note: The DBs shall be of same make as MCBs /Isolator. DB shall also be provided with label marking indicating the incoming and outgoing circuits on all way as specified.

S & F MCB DB made of sheet metal powder coated with acrylic door suitable for surface mounting with 100A copper bus bar for each phase with neutral bar & earth bar cable ties for cable management, fully insulated bus bar & shrouded neutral bar, pmproved pan assembly for ease of installations, prefitted masking sheet, reversible door for IP 43 DBs with provision for incoming MCB & outgoing MCBs with IP-43-IK09 protection grade , 240 Volts SPN with 8way Double door complete all as specified and directed.

Supply & fixing in replacement of MCB, 6 to 32 Amps, single pole, C Series, 10 KA, 240 volts.

Supply & fixing in replacement of MCB, 40 Amps, SPN , C Series, 10 KA, 240 volts.

Supply and fixing in replacement of MCB 63 Amps TPN, C Series, 10 KA, 415 volts.

S & F MCCB TPN, 4 Pole 125 A, 415 V, breaking capacity 16 KA, adjustable tripping, suitable for isolation complete all as specified and directed

Supply & Fixing in replacement of submain wiring with 3 Runs (Phase, Neutral and Earth) of 4 Sqmm, PVC insulated, unsheathed, single core, multistranded, 1100 volts, FRLS copper conductor cable drawn in and including 25/32mm wide PVC casing caping with all accessories as required and connecting to existing main switch board/Distribution Board and testing on completion, complete all as specified and directed.

Material and Labour in replacement of sub main wiring (three phase) with single core 1100 V grade conforming to relevant IS, PVC insulated unsheathed cables four runs of 6 Sqmm multi stranded copper conductor drawn in and including suitable size of non metallic PVC casing caping /roof/floors/ceiling etc with an earth wire of one run 6 sqmm copper wire earth continuity conductor connecting to existing main switch board/ Distribution Board and testing on completion etc including taking down old submain wiring of any type with PVC casing capping and making good disturbed surfaces to match existing complete all as specified and directed. Note: Five runs of 6 sqmm cable and one run of PVC casing caping of suitable size shall be measured as one run.

Material and Labour in replacement of sub main wiring (three phase) with single core 1100 V grade conforming to relevant IS, PVC insulated unsheathed cables four runs of 10 Sq mm multi stranded copper conductor drawn in and including suitable size of non metallic PVC casing caping /roof/floors/ceiling etc with an earth wire of one run 10 sqmm copper wire earth continuity conductor connecting to existing main switch board \ Distribution Board and testing on completion etc including taking down old submain wiring of any type with PVC casing capping and making good disturbed surfaces to match existing all as specified and directed. Note: Five runs of 10 sqmm cable and one run of PVC casing caping of suitable size shall be measured as one run.

Supply, installation, testing and commissioning of maximum 36W backlit type 600 mm x 600 mm recess mounting LED luminaire equipped with CRCA powder coating housing, high transmittance PF diffuser with symmetric light distribution , minimum system lumen output of 3600 lm, THD<20% CRI> 80. CCT6500K, high surge protection upto 3.5KV and operating temperature 0°C to +45°C, Driver safety requirement standards as per IS 15885-2 -13 all as per Havells Cat No 2X2 PANEL 36 W 6500 K or equivalent of make list, complete all as specified and as directed.

Supply, installation, testing & commissioning of maximum 20W LED IP 20 batten with extruded aluminium housing in Anodised finish, minimum system lumen 2000 Lumen in 20 W, THD<20%, CRI>80, CCT=6500K, high surge protection 4 KV and operating temperature 0°C to +45°C, Integrated LED driver offers comfortable soft light, high durability. Driver safety requirement standards as per IS 15885-2 -13.T, Make :- Havells Cat No LUMILINEPLUSNEOBS20WLED830SPCSSIND or equivalent of make list, complete all as specified and as directed.

Supply, installation, testing & commissioning of maximum 10W LED IP 20 batten with extruded aluminium housing in Anodised finish, minimum system lumen 1000 Lumen in 10 W, THD<20%, CRI>80, CCT=6500K, high surge protection 4 KV and operating temperature 0°C to +45°C, Integrated LED driver offers comfortable soft light, high durability. Driver safety requirement standards as per IS 15885-2 -13.T, Make :- Havells Cat No LUMILINEPLUSBS10WLED830SPCSSIND or equivalent of make list, complete all as specified and as directed.

Supply, fixing and testing of flood light maximum 150W LED, minimum system lumen output of 16500 lm. The luminnare should have colour temperature of 5700/ 6500K and THD<10% CRI> 70. The luminaire shall meet IP66 ingress protection and impact resistance of IK07 and luminaire housing should made of pressure die-cast aluminium and itegrated PC Lens. The luminaire should have the features of high voltage 10 kV external surge protection long life of LEDs 50000* BH (L70), integrated potted LED driver offers comfortable softlight, high durability, Driver safety requirement standards as per IS 15885-2 -13. Cat part No JETAADORNFLS150WLED757SSYMTOTG of Havells or equivalent in makes list

Supply, fix, connect and test LED Bldg Security light fitting 60W , pressure die cast aluminum housing, heat resistance toughened glass, IP 66 protection, better optics for uniform distribution, aesthetically designed roadway luminiare with excellent thermal management, including GI pipe bracket,clamps etc and wiring from ceiling rose/light point , complete all as specified and directed. (Make - Havells Cat part No ENDURASUNBEAMSL60WLED757SASYTOPC or equivalant of makes list

Material & Labour for Earthing complete with galvanised steel earth plate electrode 60cmx60cmx6.3 mm thickness burried directly in ground (earth pit not less than 2.25mtr deep below normal ground level) with top edge of earth plate not less than 1.5 mtr below normal ground level connected to and incl galvanised earth lead wire of 4.00mm dia by means of nuts & bolts, check nuts and washers of galvanised incl PCC pit of 1:2:4 type B-1, cover reinforced with XPM weight not less than 4 Kg/Sqm and 6mm dia bar handle, earth pit angle iron frame of size 25mm x 25mm, excavation and earth work in any type of soil, charcoal dust, salt, light grade GI watering pipe 20mm dia with funnel and wire -mesh and medium grade GI protection pipe of 15mm bore from top edge of earth plate upto main distribution board complete all to as shown in electrical plate No 3 of MES Sch 2009 (Part I) connected main switch board including testing complete all as specified directd.

Supply and fixing of earth continuity conductor or main earthing lead fixed to wall or burried in ground, drawn through conduit / pipe for loop earthing etc. 4 mm dia galvanised iron wire complete all as specified and directed.

Excavation in trenches not exceeding 1.5 m width and not exc 1.5 in depth getting out soft /loose soil for laying and taking down UG cable of any size complete all as specified and directed.

Returning filling in including spreading levelling watering and well ramming in layers not exceeding 25 cm in thick .

Removal of surplus soil to a distance not exceeding 50 m and depositing where directed by Engr-in-charge.

Supply and fix for DWC high density polyethylene pipes of dia size outer dia of 50mm, having outer side wall corrugated and inner surface plain confirming to IS 14930 (Part-I & II) for protection of underground cable laid in trenches/floor/fixed on pole/wall including coupler for pipe joint all fittings and clamps as required complete all as specified and directed.

Supply and fix for DWC high density polyethylene pipes of dia size outer dia of 90mm, having outer side wall corrugated and inner surface plain confirming to IS 14930 (Part-I & II) for protection of underground cable laid in trenches/floor/fixed on pole/wall including coupler for pipe joint all fittings and clamps as required complete all as specified and directed.

Supply, laying, in replacement of jointing and commissioning of cable XLPE insulated PVC sheathed, armoured 1100 Volt grade heavy duty with standard aluminium conductor through pipe/road crossing in ducts, on poles, trenches etc of cross-section area of size 120 Sqmm 3.5 core Note :- Exavcation, eartwork, DWC /GI pipe etc shall be measued and paid Seperately

All as per item No 40 above but cross section area 95 Sqmm 3.5 core.

All as per item No 40 above but cross section area 70 Sqmm 3.5 core.

All as per item No 40 above but cross section area 50 Sqmm 3.5 core.

All as per item No 40 above but cross section area 35 Sqmm 3.5 core.

Supply and fix GI tubing (light grade) with all fittings,laid in trenches/road, or fixed along with walls /poles,bore of pipe 50mm complete all as specified and directed.

Supply & Fixing in replacement of Changeover load changeover switches 4 pole 160A complete all as specified and directed.

Supply & Fixing in replacement of Changeover load changeover switches 4 pole 400A with enclousre complete all as specified and directed.

M & L in replacement Earthing complete with galvanized steel earth plate electrode 60 cm X 60 cm X 6.3 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of plate not less than 1.5 mtr below ground level connecting to the GI strip 32 x 6mm, by means nut bolt, nuts, check nuts and washer of the GI Earth wire protected by provision of GI light grade pipe 40 mm incl provision of concrete pit in PCC (1:2:4) type B-1 using 20 mm graded stone aggregated with 40 mm thick cover with RCC (1:2:4) reinforced with XPM (weight not less than 4 Kg / Sqm) and frame of angle iron 25mm X 25 mm X 3mm with lugs 2 Nos and with 6 mm dia MS bar handle made to shape, GI light grade 20 mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edge of earth plate, common salt and charcoal filling, taste point made out of phosphorus bronze with fixing arrangement, funnel, wire mesh and earth work in hard/dense soil, returning filling in and removal of surplus soil to a distance not exceeding than 50 mtr, all as per electric plate No 3 of SSR Part I 2009 and connection to earth test point all as specified incl testing on completion”.

Supply and fixing of galvannised strip 32x6mm with saddles and fixing screws etc. complete all as specified and directed.

M & L for transformer plinth of size 3 m x 3 x x1.5 m to mount the 11 KV Transformer up to capacity of 100 KVA ,PCC platform for transformer shall be provided as per "CEPZ TD DRG NO", CEPZ/91/TD/8M. Drawing complete including dismantling of old platform all as specified and directed

M&L for shifting of Transformer from P-10 bldg to near 4 Ploe TFR with the help of crane/hydra and connection of HT and LT cable connection complete all as per specified and directed by Engr in charge

Supply, laying & testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminium conductor, 11000 volts grade, of size 3 core 95 sq mm.

Supply joint and commission HT 11 KV cable end termination box heat shrinkable type suitable for 3 core 95sqmm XLPE cable 11 KV outdoor type including aluminium ferrules jointing chemical etc complete make: Raychem/denson

Material and labour for danger notice board/plate 1.6 mm thick mild steel viterous enameled white with letters/figures and conventional skull and bones in signal red colour and fixed to HT pole with MSFI clamp 20x3 mm clamp 250 mm x 200 mm size of danger board.

Supply and laying of synthetic rubber insulated mats 2.5 mm thick for voltage upto 11 KV for electrical purpose as per IS-15652-2006 suitable for electrical shock safety of size 2m x 1m complete all as specified and directed.

MAHIMA CONSTRUCTION (BID ID -3404499)

sapana enterprises (BID ID -3406679)

SHRI SULAI ELECTRICALS (BID ID -3406617)

NEELESH ENGINEERS (BID ID -3407052)