Contruction of Anganwadi Building at Maniayarkundam H/o C.K.Hills Vadakkunadu at P.N.Palayam Block in Salem District Focus Block Development Programme - 2025-2026

Amount

Contruction of Anganwadi Building at Maniayarkundam H/o C.K.Hills Vadakkunadu

Earth work excavation for foundation in all soils such as red earth ,hard stiff clay soil, stiff black cotton soil, hard redearth,shales, murrams, gravel,hard rock not requiring blasting ete complete.,

Collection and supply of sand and filling in to the basement including cost and conveyance to the site and all labour charges for filling as per standard speecifications

Collection and supply of 40mm metal and filling in to the basement including cost and conveyance to the site and all labour charges for filling as per standard speecifications

Collection and supply of 20mm metal and filling in to the basement including cost and conveyance to the site and all labour charges for filling as per standard speecifications

Cement concrete 1:4:8 mix using 40mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing,laying and curing etc complete

Brick work in cement mortar 1:5 (One cement and five sand) using country bricks ground moulded of size 8 3/4" x4 1/4" x2 1/4"cm. For the following including curing,etc., complete complying with standard specification

Supplying and erecting shuttering including necessary supports for plane surface in foundation and basement and in all floors for RCC column footings, column, pedestals, plinth beam, grade beams, raft slabs, staircase steps, bed blocks, critical pier etc., using mild steel sheets of size 90 x 60 cm & 10 gauge stiffened, welded with steel angles of size 25mm x 25mm x 3mm for boarding laid over silver oak (country wood) joists of size 10cm x 6.5cm spaced at about 90 cm centre to centre and supported by casuarina props of 10cm to 13cm dia spaced at 75cm centre to centre complete complying with standard specification and as directed (S.I.155)

Supplying and erecting shuttering including necessary supports for plane surface in foundation and basement and in all floors for RCC column footings, column, pedestals, plinth beam, grade beams, raft slabs, staircase steps, bed blocks, critical pier etc., using mild steel sheets of size 90 x 60 cm & 10 gauge stiffened, welded with steel angles of size 25mm x 25mm x 3mm for boarding laid over silver oak (country wood) joists of size 10cm x 6.5cm spaced at about 90 cm centre to centre and supported by casuarina props of 10cm to 13cm dia spaced at 75cm centre to centre complete complying with standard specification and as directed (S.I.155) Centering Sides

Supplying and Fabricating and placing in position MS steel or Ribbed Tor Steel for all Reinforced Cement Concrete works as per the design given including cost of steel and binding wire in all floors etc, Complete complying with stanard specification

Reinforced cement concrete 1:1.5:3 mix using 20mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing, laying, and curing etc complete

Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The Surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (waterproof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc., complete complying with standard specifications and as directed by the Departmental Officers. The rates are inclusive of hire charges for grinding machine with wheel, cost of sand paper (waterproof abrasive sheet), cost of putty blade, labour charges for grinding the joints and sand papering, two coat of putty, scrapping the putty area to level the surface smooth, etc., complete]. The Putty should be got approved by the Executive Engineer before use on work. (Based on SoR 2023-24) Wall putty Powder: (10 sqm/10x20 kg= 20Kg)

Plastering with CM 1:5, 12mm thick. including curing etc., complete complying with standard specifications and as directed by the departmental officers.

Supply and fixing of INDIYAN Type Baby Water closet including all charges etc., complete

Supply and fixing of Europeion Water closet including all charges etc., complete

Fabrication and supply of mild steel Door of any size with single leaf outer frame made of 35x35x5 mm equal M.S angle and shutter frame made of 25x25x5 mm M.S angle for horizontal and vertical member with stiffener and fully covered with 18 G plate etc complete.

Steel Door 1.10m x 2.40 m

Steel Door 0.90 x 2.40 m

Steel Door 0.75 x 1.00 m

Steel Windows 1.20 x 1.30 m

Towards the cost of Supplying & cost of supply of RCC Jollies of size 0.45 x 0.45 m

Towards the Cost of Labour charges for steel doors and Windows etc, complete, complying with standard specification.

Steel Door

Windows

Supply and fixing Cuddapah slab of 20/30mm thick including labour charges etc complete -1 sq.m

Weathering Course Brick jelly lime concrete using 20mm brick jelly with slacked lime in the ratio of 32:12.5 including cost and conveyance of all materials to site and all labour charges for mixing , laying ,and finishing etc complete

Finished with one course of pressed tiles of size 23x23x2cm with cement mortar 1:3 mix and pointed with the same oiled mortar including cost and conveyance of all materials to site and all labour charges etc complete for 10 Sqm

Paving the floor with best quality Vertified Tiles of size 600 x 600 x 8mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three crushed stone M.Sand) 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Paving the floor with best quality Pre-polished Concrete anti-skid step Tiles of 20mm cement mortar 1:3 (one cement and three sand) 20mm thick in all floors and the top pointed with the (White cement mixed with colouring pigment) neatly and fixed in position so as to make it perfectly smooth and shining to the alignment etc., complete complying with standard specifications and as directed by the departmental officers.

Dadooing walls with colour designed Glazed tiles of sizes 300mm X200mm X 6mm size of approved make and quality and colour lSet in cement mortar 1:2 (one cement ,two sand) over 10 mm base layer plastering and pointing with white cement neatly as directed.

Distembering two coats oil bound distember over priming coat inculding cost and conveyance of all materials to site and all loboure charges etc complete ( Inner wall )

Plastic Emulsion painting two coats over priming coat inculding cost and conveyance of all materials to site and all loboure charges etc complete ( outer wall )

Painting two coats over new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with best approved best quality of synthetic enamel paint of approved colour over the existing priming coat etc., complete complying with standard specifications and as directed by the departmental officers.

Supplying and fixing P.V.C rainwater down fall pipe of 110mm dia with necessary shoes, bends,& clamps etc.,

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}

SRI R S ASSOCIATES (BID ID -1531661)