Miscellaneous work for Naroli Primary School Building (3rd call)

Exposed brick cladding using exposed sand finished (traditional) cladding brick of approved make of size 225 x 65 x 30 mm fitting with this tile used to adhesive chemical and gouting the joints of exposed brick work having joints of 10mm width, (adesive and water) filler of desired shade with pointing exposed brickpolishing, brushing and cleanig and after one Coat paint for approve water chemical.etc Completed. including cost of scaffolding, curing etc. complete in superstructure upto all level as per drawing and design approved by architect / engineer

Providing and fixing SLIDING COMPOUND GATE of 50mm dia G.I. Pipe (Class B) and vertical 16mm M.S. square bar placed at 100mm C/C with frame and providing round ring of 16mm x 5mm thick M.S. flat in middle of the vertical bar and half ring at bottom and top etc. with providing and fixing of WICKET GATE IN GATE itself and providing wheel and pulley with G.I. Pipe 50mm dia at bottom for sliding including fixture and fastenings, locking arrangements and fixing in position in plumb including priming coat of red oxide paint and two coat of approved quality oil paint etc. as per drawing and direction etc. complete.

Applying two coat of primer of approved brandand manufacture on exterior new wall surface complete as directed by Engineer-incharge. .

Finishing wall with weather proof exterior emulsion paint on wall surface (two coats) to give an required shape even shade after thoroughly brushing the surface to remove all dirt, and remains of loose powdered materials.etc complete

Digital Eco viny printing pasted on A . C .P (Aluminium Composite Panel) Sheet with front sideimported clear Acrylic sheet and fancy Photo Framing with fitting at proper Location as directed by engineer in charge. (900 mm X 1200 mm).

Digital Eco viny printing pasted on A . C .P (Aluminium Composite Panel) Sheet with front sideimported clear Acrylic sheet and fancy Photo Framing with fitting at proper Location as directed by engineer in charge.(250 mm X 150 mm).

Providing and fixing M.S.grill made of Bright bar of required pattern to granite frames of windows/ Ventilation etc. with M.S. Flats at required spacings and frame alround, square or round bars with round headed bolts and nuts or by screws (A) Bright Bar Plan grill.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in 60 cm lenght, 30 cm height, and 15 cm thick of position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineerin- charge).