Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹32.2 LAccepted-AOC FLAT NO 602 THE ELEPHANT HEAD CGHS LTD PLOT NO 41 OPP AYUSHMAN HOSPITAL DWARKA SECTOR 10 SOUTH WEST DELHI 110075 | SOUTH WEST | DELHI | 110075 | L1 | Accepted-AOC Lowest | |
| 2 | L2₹36.6 L+₹4.4 L (13.6%)Rejected-Finance | L2 | Rejected-Finance Other than lowest | |
| 3 | L3₹41.9 L+₹9.6 L (29.8%)Rejected-Finance 0 SHOP NO 48 BHAGAT SINGH COMPLEX VYAPAR VIHAR ROAD CAR PLANET VYAPAR VIHAR BILASPUR BILASPUR CHHATTISGARH 495001 | BILASPUR | CHHATTISGARH | 495001 | L3 | Rejected-Finance Other than lowest | |
| 4 | L4₹45.1 L+₹12.9 L (39.9%)Rejected-Finance BX 167 4 ISHWAR NAGAR PATHANKOT PUNJAB 145001 UDYAM PB 16 0001334 03AALFR1593C1ZE B R | PATHANKOT | PUNJAB | 145001 | L4 | Rejected-Finance Other than lowest |
Tender Value
₹34.0 L
EMD Value
₹68,080
Closing Date
7 Feb 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GARRISON ENGINEER (AF) THOISE
GARRISON ENGINEER (AF) THOISE 19 FBSU, c/o 56 APO, PIN 937219
SPECIAL REPAIR TO RING MAIN ELECTRIC SUPPLY FOR CRITICAL INSTALLATION AT AIR FORCE STATION THOISE UNDER GE(AF) THOISE
2023_MES_573915_1
GEAF/T-37/2022-23
Open Tender
Electrical and Maintenance Works
Item Rate
210 days
GARRISON ENGINEER (AF) THOISE
As per Tender Document
7 documents required · 7 mandatory
₹500
GE AF Thoise
₹68,080
Yes
21 Apr 2023
10 Jan 2023
9 Feb 2023
10 Jan 2023
7 Feb 2023
24 Jan 2023
Amount
Taking down existing unserviceable worn out XLPE under ground cable of any size and length at any position from complete all as specified and as directed by Engr-in-Charge.
M&L for XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, heavy duty electric cable with aluminium conductor, 1100 Volts grade, cross-sectional area 95.0 Sqmm, 3.5-core, laid in trenches or passing through pipes, including suitable lugs and accessories for making connections at both ends complete all as specified and as directed by Engr-in-Charge.
M&L for XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, heavy duty electric cable with aluminium conductor, 1100 Volts grade, cross-sectional area 240.0 Sqmm, 3.5-core, laid in trenches or passing through pipes, including suitable lugs and accessories for making connections at both ends complete all as specified and as directed by Engr-in-Charge.
Excavation in trenches n.exc. 1.5 mtr wide and n.exc 1.5 mtr deep for foundations of poles/stays/cable etc not exc 10 Sqm area on plan and getting out in Hard/Dense soil complete all as specifed and as directed by Engineer-in-Charge.
Returning filling in including spreading levelling, watering and well ramming in layer each not exc. 25 cm thick in a soft/loose soil complete all as specified and as directed by Engr-in-Charge.
Removing surplus soil to a distance not exc. 50 mtr and depositing where directed at a level n.exc. 1.5 mtr above the starting point complete all as specified and as directed by Engr-in-Charge.
M&L for PCC cable cover Class LV, Type I, flat, size 250 mm x 150mm x 40mm laid Flat in trenches over the cable with length 250mm perpendicular to the direction of cable, adjacent/ abutting each other complete all as specified and as directed by Engr-in-Charge. Note:-Excavation and earth work to be measured and paid for separately
M&L for Sand cushioning to protection of underground cables, laid 8 cm before laying and 15 cm after laying of cable, and punned to form an overall layer of 18 cm thick complete all as specified and as directed by Engr-in-Charge. Note: Punned thickness of 18cm shall be measured for payment purpose.
M&L in repair Earthing complete with copper plate electrode 600x600x3.15mm thick electrode burried directly in ground not less than 3.0 mtr deep below normal ground level with top edge of earth plate not less than 2.5 mtr below normal ground level connected to and including and 20x3 mm copper strip as earth lead by means of bolt ,nuts, check nuts, and washers of stainless steel and duly welded incl PCC pit in PCC 1:2:4 type B-I angle iron 40x40x3mm frame, pit in PCC 1:2:4 type B-I cover 40mm reinforced with XPM weight not less than 4 Kg/Sqm and 6mm dia bar handle, excavation and earth work in any type of soil, charcoal dust and salt light grade GI watering pipe 20mm bore with funnel and wire mashand medium grade GI protection pipe 40mm bore and earth wire up all as shown in electrical plate No 3 of MES SSR- Part-I complete all as directed and specified by Engineer-in-charge. Note : (i) Excavation work should be done by manpower only. (ii) Earth test should be done by contractor and if required result is not found entire earthing should by contractor again with no extra cost to Govt. No further claim shall be admissible on this account.
Supply, installation, testing and commissioning of electric LT Feeder Pillar Box, outdoor, cubical type, floor mounted, factory made, CPRI approved, size 1000x1200x450mm, Al Bus Bar 800 Amps fabricated out of 3.4mm thick mild steel sheet mounted on frame of mild steel angle iron 40x40x6mm also comprising of following complete all as specified and as directed by Engr-in-Charge. Incoming:- (a) Change Over Switch 400 Amps -03 Nos (b) MCCB, four pole, 400 Amps, 415 Volts, adjustable type, with breaking capacity 35 KA- 03 No. (c) MFn Meter V, A, F, kW, KVA, kVAr, kWh, , PF etc Make L&T , Equivelent in Seimns and Schinider -01 Nos (d) Bus Bar Coupler 4 Pole ACB 630 Amp, 65 KA with Microprocessor Release IPR 1+ - 02 Nos (e) Suitable Contacter, relay,& circuit protection device Outgoing (i) MCCB 4 pole 415 Volts of capacity 200 amps thermal magnetic release adjustable type of breaking capacity 25 KA-04 No (incoming) With addition to Amp meter-04 Nos (ii) TPN 4 pole 415 Volts of capacity 63 amps thermal magnetic release adjustable type of breaking capacity 10 KA-02 Nos (outgoing) With addition to Amp meter-02 Nos
Supply, installation, testing and commissioning of electric LT Feeder Pillar Box, outdoor, cubical type, floor mounted, factory made, CPRI approved, size 1000x1200x450mm, Al Bus Bar 800 Amps fabricated out of 3.4mm thick mild steel sheet mounted on frame of mild steel angle iron 40x40x6mm also comprising of following complete all as specified and as directed by Engr-in-Charge. Incoming:- (a) Change Over Switch 630 Amps -02 Nos (a) Change Over Switch 400 Amps -02 Nos (b) MCCB, four pole, 400 Amps, 415 Volts, adjustable type, with breaking capacity 35 KA- 03 No ( incl 03 Nos Amp meter). (c) MFn Meter V, A, F, kW, KVA, kVAr, kWh, , PF etc Make L&T , Equivelent in Seimns and Schinider -01 Nos (d) Bus Bar Coupler 4 Pole ACB 630 Amp, 65 KA with Microprocessor Release IPR 1+ - 02 Nos (e) Suitable Contacter, relay,& circuit protection device Outgoing (i) MCCB 4 pole 415 Volts of capacity 300 amps thermal magnetic release adjustable type of breaking capacity 25 KA-04 No (incoming) With addition to Amp meter-04 (ii) MCCB 4 pole 415 Volts of capacity 400 amps thermal magnetic release adjustable type of breaking capacity 10 KA-02 Nos (outgoing) With addition to Amp meter-01
M/S NINDI BUILDERS
Sona Enterprises
M/S RUDHRAKSH TRADING CO
stage.html
html • 0.05 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .