Construction of boundary wall at vulnerable locations of encroachment in IGP-BSL- BD & BSL-KNW section (27.250 Km). Project id - 01.01.64.23.1.50.001

BSL-KNW section (27.250 Km). Project id - 01.01.64.23.1.50.001

Item- 1 NS items

S No. Item Description of Item Unit Qty Rate Amount

1 NS-3 Providing & laying in position 7mm Dia HTS Kg 84029.00 137.00 11511973.00

Indented wires with UTS of 1470 MPa

confirming to IS-6003 for manufacturing of

PSC element by using mechanical pulling

arrangement like Rabbit/ Bed master including

all accessories for stressing & destressing

operations as per approved make etc,

complete as per drawings and direction of

Engineer - incharge. Note: The rate is inclusive

of all contractors labour, materials including,

cutting, pulling arrangement, machineries,

tools & plants, taxes etc. complete. Payment

will not be made for any wastages .

BHUSAWAL DIVN-ENGINEERING/CENTRAL RLY

2 NS-5 "Providing & grouting of PSC Column with RCC Numbers 8380.00 709.00 5941420.00

Foundation as per approved drawing with M-

60 grade cementitious grout (Non Shrink) of

approved make by suitable means (Free

flowing/pump), curing etc. complete as per

directions of Engineer-in- charge. Note: The

rate is inclusive of all contractors labour, tools

& plants, all materials including approved

quality of non- shrink cementious grout og

M60 grade, aggregates, all machineries,

placing in position, etc. Complete in all

respect. Payment will not be made for any

3 NS-1A "Fabrication, Manufacturing & Transportation Each 25104.00 1293.00 32459472.00

of Precast Prestressed Concrete elements of

M45 grade design mix concrete (i) Fabrication

& manufacturing of Prestressed Concrete (Pre-

tensioned) elements such as panel, column

etc. as per approved drawing in Controlled

Factory Environment with approved

methodology by using long line casting met

hod. Concreting should be done by batch

mixing plant with capable of producing zero

slump concrete, transported through

mechnical arrangement & layed on the bed,

finishing, curing and also provision of steam

curing. Cutting, making necessary cutout/holes

of required sizes for services in PSC element

after achieving required strength, yard

handling & stacking all complete as per

approved shop drawings & design mix as per

the direction of the En gineer-in-charge . (Cost

of HTS wires shall be paid separately under

relevant item). (ii) Transportation of Precast

PSC Elements from casting yard to site of work

by suitable Truck/Trailor with proper

accessories, including the cost of loading,

unloading & stacking at site with the help of

required capacity cranes . (iii) The rate is

inclusive of all ingredients i.e. cement, sand,

aggregate, admixtures, water etc. including

handling, batching, mixing, transporting,

placing and vibrating of concrete, curing,

scaffolding, shuttering, formwork, mould,

staging, lifting arrangement as per approved

drawing etc. with all lead and lift with

contractor's own labour, tools & plants

machineries all taxes etc complete as required

for successful completion of the item. Note-1:

No payment shall be made for damaged

Precast elements Note-2: 70% payment shall

be made when PSC elements reach to site and

balance 30% payment shall be made after

erection & placement in position. Note-3:

Incase of change of size of precast PSC

element, payment shall be adjusted on

volumetric pro-rata basis. a) PSC Panel of Size

2330mm X 600mm X 80mm as per Approved

BHUSAWAL DIVN-ENGINEERING/CENTRAL RLY

4 NS 4/c Erection & Installation of Precast PSC/RCC Each 8380.00 832.00 6972160.00

elements in correct & final position with proper

line, level and plumb at site making all

arrangements (i.e cranes, push-pull jacks & all

other T&P) for lifting, placing, Steel Props for

holding in position after Erection & Alignment

of elements, within erection tolerance as per

IS:15916 as per approved shop drawings and

all complete as per the direction of Engineer

grouting shall be paid separately). Note-1: The

rate is inclusive of all contractors labour,

materials including machineries, tools &

plants, etc. complete. Note-2: In case of

c h a n g e of size of precast PSC element,

payment shall be adjusted on volumetric pro-

rata basis. c) RCC Foundation 1300mm X

800mm X 700mm as per Approved Type Plan

5 NS 4/a Erection & Installation of Precast PSC/RCC Each 25104.00 228.00 5723712.00

elements in correct & final position with proper

line, level and plumb at site making all

arrangements (i.e cranes, push-pull jacks & all

other T&P) for lifting, placing, Steel Props for

holding in position after Erection & Alignment

of elements, within erection tolerance as per

IS:15916 as per approved shop drawings and

all complete as per the direction of Engineerin-

Charge. (Cost of grouting shall be paid

separately). Note-1: The rate is inclusive of all

contractors labour, materials including

machineries, tools & plants, etc. complete.

Note-2: In case of change of size of precast

P S C element, payment shall be adjusted on

volumetric pro-rata basis. a) PSC Panel of Size

2330mm X 600mm X 80mm as per Approved

6 NS 4/b Erection & Installation of Precast PSC/RCC Each 8380.00 304.00 2547520.00

elements in correct & final position with proper

line, level and plumb at site making all

arrangements (i.e cranes, push-pull jacks & all

other T&P) for lifting, placing, Steel Props for

holding in position after Erection & Alignment

of elements, within erection tolerance as per

IS:15916 as per approved shop drawings and

all complete as per the direction of Engineer

in- Charge. (Cost of grouting shall be paid

separately). Note-1: The rate is inclusive of all

contractors labour, materials including

machineries, tools & plants, etc. complete.

Note-2: In case of change 250mm as per

Approved Type Plan of size of precast PSC

element, payment shall be adjusted on

volumetric pro-rata basis. b) PSC Cloumn (H-

Section) of size 2650mm X 250mm X

7 NS 4/d Erection & Installation of Precast PSC/RCC Each 8380.00 19.00 159220.00

elements in correct & final position with proper

line, level and plumb at site making all

arrangements (i.e cranes, push-pull jacks & all

other T&P) for lifting, placing, Steel Props for

holding in position after Erection & Alignment

of elements, within erection tolerance as per

IS:15916 as per approved shop drawings and

all complete as per the direction of Engineer

in- Charge. (Cost of grouting shall be paid

separately). Note-1: The rate is inclusive of all

contractors labour, materials including

machineries, tools & plants, etc. complete.

Note-2: In case of change of size of precast

P S C element, payment shall be adjusted on

volumetric pro-rata basis. d) Column Cap

300mm X 300mm X 150mm as per Approved

BHUSAWAL DIVN-ENGINEERING/CENTRAL RLY

8 NS - "Fabrication, Manufacturing & Transportation Each 8380.00 1722.00 14430360.00

1/b of Precast Prestressed Concrete elements of

M45 grade design mix concrete (i) Fabrication

& manufacturing of Prestressed Concrete (Pre-

tensioned) elements such as panel, column

etc. as per approved drawing in Controlled

Factory Environment with approved

methodology by using long line casting met

hod. Concreting should be done by batch

mixing plant with capable of producing zero

slump concrete, transported through

mechnical arrangement & layed on the bed,

finishing, curing and also provision of steam

curing. Cutting, making necessary cutout/holes

of required sizes for services in PSC element

after achieving required strength, yard

handling & stacking all complete as per

approved shop drawings & design mix as per

the direction of the En gineer-in-charge . (Cost

of HTS wires shall be paid separately under

relevant item). (ii) Transportation of Precast

PSC Elements from casting yard to site of work

by suitable Truck/Trailor with proper

accessories, including the cost of loading,

unloading & stacking at site with the help of

required capacity cranes . (iii) The rate is

inclusive of all ingredients i.e. cement, sand,

aggregate, admixtures, water etc. including

handling, batching, mixing, transporting,

placing and vibrating of concrete, curing,

scaffolding, shuttering, formwork, mould,

staging, lifting arrangement as per approved

drawing etc. with all lead and lift with

contractor's own labour, tools & plants

machineries all taxes etc complete as required

for successful completion of the item. Note-1:

No payment shall be made for damaged

Precast elements Note-2: 70% payment shall

be made when PSC elements reach to site and

balance 30% payment shall be made after

erection & placement in position. Note-3:

Incase of change of size of precast PSC

element, payment shall be adjusted on

volumetric pro-rata basis. b) PSC Column CH-

Section) of size 2650mm X 250mm X 250mm

with grooved as per Approved Type Plan"

BHUSAWAL DIVN-ENGINEERING/CENTRAL RLY

9 NS - Fabrication, Manufacturing & Transportation of Each 8380.00 4200.00 35196000.00

2/a Precast RCC elements of M30 grade design

mix concrete (i) Fabrication and

manufacturing of precast concrete element

such as foundation & column cap as per

approved drawing, manufactured in controlled

factory environment with approved

methodology including moulds, mixing,

transporting and placing of concrete, vibrating,

curing, finishing, making necessary

cutout/holes of required sizes for services,

yard handling & stacking all complete as per

IS:11447:1985 and as per approved shop

drawings and design mix as per the direction

of Engineer in Charge (Cost of steel for

reinforcement shall be paid separately under

relevant item ) . (ii) Transportation of Precast

RCC Elements from casting yard to site of work

by suitable Truck/Trailor with proper

accessories, including the cost of loading,

unloading & stacking at site with the help of

required capacity cranes. ((iii) The rate is

inclusive of all ingredients i.e. cement, sand,

aggregate, admixtures, water etc. including

handling, batching, mixing, transporting,

placing and vibrating of concrete, curing,

scaffolding, shuttering, formwork, mould,

staging etc. with all lead and lift with

contractor's own labour, tools & plants

machineries all taxes etc complete as required

for successful completion of the item. Note-1:

No payment shall be made for damaged

Precast elements. Note-2: 70% payment shall

be made when PSC elements reach to site and

balance 30% payment shall be made after

erection & placement in position . Note-3:

Incase of change of size of precast RCC

element, payment shall be adjusted on

volumetric pro-rata basis. a) RCC Foundation

1300mm X 800mm X 700mm as per Approved

BHUSAWAL DIVN-ENGINEERING/CENTRAL RLY

10 NS - Fabrication, Manufacturing & Transportation of Each 8380.00 97.00 812860.00

2/b Precast RCC elements of M30 grade design

mix concrete (i) Fabrication and

manufacturing of precast concrete element

such as foundation & column cap as per

approved drawing, manufactured in controlled

factory environment with approved

methodology including moulds, mixing,

transporting and placing of concrete, vibrating,

curing, finishing, making necessary

cutout/holes of required sizes for services,

yard handling & stacking all complete as per

IS:11447:1985 and as per approved shop

drawings and design mix as per the direction

of EngineerinCharge (Cost of steel for

reinforcement shall be paid separately under

relevant item ) . (ii) Transportation of Precast

RCC Elements from casting yard to site of work

by suitable Truck/Trailor with proper

accessories, including the cost of loading,

unloading & stacking at site with the help of

required capacity cranes. ((iii) The rate is

inclusive of all ingredients i.e. cement, sand,

aggregate, admixtures, water etc. including

handling, batching, mixing, transporting,

placing and vibrating of concrete, curing,

scaffolding, shuttering, formwork, mould,

staging etc. with all lead and lift with

contractor's own labour, tools & plants

machineries all taxes etc complete as required

for successful completion of the item. Note-1:

No payment shall be made for damaged

Precast elements. Note-2: 70% payment shall

be made when PSC elements reach to site and

balance 30% payment shall be made after

erection & placement in position . Note-3:

Incase of change of size of precast RCC

element, payment shall be adjusted on

volumetric pro-rata basis. b) Column Cap

300mm X 300mm X 150mm as per Approved