Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹43.1 LAccepted-AOC ROMA BANJARA TANDA CHS BLDG NO 1 ROOM NO 507 607 MANKHURD W MUMBAI 400043 | MUMBAI | MUMBAI | MAHARASHTRA | 400043 | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹46.6 L+₹3.4 L (7.97%)Rejected-Finance 214 2ND FLOOR SAMRUDDHI COMMERCIAL PREMISES CHINCHOLI BUNDER ROAD MINDSPACE MALAD WEST | L2 | Rejected-Finance Being L2 |
Tender Value
₹44.4 L
EMD Value
₹88,800
Closing Date
26 Sept 2022, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Head, CED
Civil Engineering Division, BARC, Mumbai
Renovation /repairs to S and R Store and Miscellaneous works at other sea side buildings, North site, BARC, Trombay, Mumbai.
2022_BARC_708852_1
BARC/CED/ET/33/2022-2023 Dated 26.08.2022
Open Tender
Civil Works
Item Rate
456 days
Sea side Buildings, NS, BARC, Trombay, Mumbai
Please refer Tender documents.
8 documents required · 8 mandatory
₹0
₹88,800
24 Nov 2022
26 Aug 2022
29 Sept 2022
29 Aug 2022
26 Sept 2022
29 Aug 2022
Amount
Dismantling doors, windows and clear storey openings (steel / wood) shutter including chowkhats, architraves, holdfasts etc. complete and stacking within 100 m lead (full windows) Of area 3.00 Sq.M and below
Dismantling doors, windlows and clear storey windows (steel / wood) shutter including chowkhats, architraves, holdfasts etc. complete and stacking within 100 m lead (full windows) Of area beyond 3.00 Sq.M
Taking out doors, windlows and clear storey openings (steel / wood) shutter including stacking within 100 m lead (only shutters) Of area 3.00 Sq.M and below
Providing and fixing pannelled teak wood door shutters (35 mm thick frames and 25 mm thick shutters) using second class teak wood using styles & middle rails 100 mm x 35 mm, bottom rail 200 mm x 35 mm, top rail & lock rails 150 X 35 mm and panelling with 25 mm thick best quality teak wood planks including fixing in existing door frame including ISI marked 100 mm stainless hinges with SS screws complete all as per specifications and as directed
Providing and fixing 35 mm thick flush door shutters conforming to IS : 2202 non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with internal teak wood lipping 25mm wide and fixing with 4 Nos of 125 mm long Stainless steel Hinges with S.S. wood screws complete.
Extra for providing vision panel not exceeding 0.1 sqm in all type of flush door including fixing 4 mm clear glass with necessary teak wood beadings complete all as per specifications and as per drawings.
Providing and applying French spirit polishing for wooden sufaces with two coats on new works including a coat of wood filler to form a uniform neat finish as directed by the Engineer -in-charge and / or as per the specifications complete as directed by the Engieer-incharge.
Providing and painting TWO coats of synthetic enamel paint on new wooden surfaces of approved brand and manufacturer of required colour to give an even shade over an under coat of suitable shade primer of approved brand and manufacturer including preparation of the surfaces, scaffolding complete. as per specifications and as directed by the Engineer-in-charge
Providing and fixing FRP door shutters 35 mm thick flush door / panelled type with plain colour or wooden veneer finish of approved make, design & colour. made out of 1.5 mm thick FRP skin moulded over wooden frame work of 40 mm wide and required thickness wooden styles and minimum 100 mm wide lock rails and wooden blocks for door stoppers, tower bolts, baby latch, aldrop, handles etc. wherever required and core filled with Polyurethane Foam and fixing with 4 Nos 100 mm (ISI marked) stainless steel hinges with S.S. wood screws
Providing and fixing brass mortise latch and lock of approved make with 6 levers and a pair of lever Brass handles with necessary screws etc complete suitable for fixing in wooden / steel/ FRP/ doors as per specifications
Providing and fixing stainless steel aldrops of size 300 X 14 mm of approved make with necessary screws, bolting from rear side complete as per specifications complete.
Providing and fixing stainless steel tower bolts of size 200 X 12 mm with necessary screws etc.all as per specifications and as per drawings.
Providing and fixing anodised aluminium baby latch of size 75 X 12 mm ISI marked of approved make transparent or dyed to requried colour or shade with necessary screws etc.
Providing and fixing aluminium handles 175 mm long Inner grip 125 mm with 12 mm dia rod plate type BOW handles ISI marked of approved make, anodised transparent or dyed to req. colour or shade with necessary screws etc. complete.
Providing and fixing aluminium hanging heavy quality floor door stopper ISI marked with twin rubber stoppers, anodised transparent or dyed to required. colour or shade with necessary screws etc. complete.
Providing and fixing IS: 3564 marked aluminium die cast body tubular type universal hydraulic door closer of approved make with necessary accessories and screws etc. in wooden doors / steel doors with necessary bolts & nuts complete as per specifications and as directed by the Engineer-in-charge.
Providing and Fixing Homogeneous 2.00 mm thick PVC sheet / tile in flooring and skirting of approved make in approved pattern on a smooth and damp proof base using rubber based adhesive of approved quality and manufacturer including, levelling small undulations with plasterof paris if required , rolling with light wooden roller weighing about 5 kg all complete as directed by Engineer-in-charge in approved colour and shade
Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 100 m lead For thickness of tiles above 10 mm and up to 25 mm .
Dismantling old plaster / skirting carefully , raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 100 m lead.
Providing 15 mm thick Internal plaster in cement mortar 1:4 without cement punning (using Crushed Sand) finished smooth, including sieving of sand to required fineness, preparation of the surface, scaffolding, curing all as per specifications, drawings and as directed at site complete.
Providing and laying in position cement concrete of 1:3:6 (1 cement, 3 crushed sand, 6 graded stone aggregate of maximum size 20 mm) including consolidation, finishing, curing etc. complete as per specificationsand drawings but excluding the cost of Form work shuttering, centering Complete at all levels
Providing , Laying , jointing, fixing and testing Heavy quality (CClass) Galvanised Iron pipes and ISI marked fittings like, tees, elbows, bends, unions, nipples,reducers etc. as required for the work, including testing the pipes and fittings for 10.00 Kg / Sq.Cm hydralic pressure with a minimum period of two hours duration with clean water, including cutting , threading, jointing with hemp yarn, white lead, jointing Teflon tape, exposed / concealed by chasing walls and making good by filling with concrete 1:3:6, complete all as per specifications and drawings, including two coats of anti corrosive bitumastic paint for all concealed lines / two coats of synthetic enamel paint for all exposed lines all as directed by the Engineer-in-charge. Pipes with ISI marked 'C' -Class heavy quality pipes of approved make.
15 mm dia G.I pipe
20 mm dia G.I pipe
25 mm dia G.I pipe
Making connection of distribution branch with G.I main of 25 to 40 mm nominal bore by providing and fixing tee including cutting and threading the pipes etc. complete as per specifications and as directed by the Engineer-in-charge
Providing & fixing in position heavy pattern screw down gun metal gate valve with handles and wheels of approved make including testing for 10Kg/cm2 pressure with clean and potable water with a minimum testing duration of two hours etc.as per specification and as directed by the Engineer-in-charge
Providing and fixing C.P brass 15 mm dia bib cock of fancy variety quarter turn of approved type, heavy quality of specified / approved make as per specifications and as directed by the Engineer-in-charge.
Providing and fixing 15 mm CP brass Angle stop cock of approved make- quarter Turn, of heavy quality of specified / approved make, for wash basin inlet / flush cistern etc. as per specifications and as directed by the Engineer-in-charge
Providing and fixing 15 mm C.P brass 2 in 1 bib cock and Angle cock combination of Heavy Quality of approved make as per specifications and as directed by the Engineer-in-charge
Providing and fixing heavy quality health faucet with 1.50 metres long flexible hose (hand shower) of approved make with wall brackets and type as per specifications and as directed by the Engineer-in-charge .
Providing & fixing wall mixture with Provision for overhead shower with 115mm long bend pipe on upper side, connecting legs & wall flanges as per specification and directed by engineer-in -charge.
Providing and Fixing CP brass 100 mm dia shower rose with Shower arm of Specified make as per specifications and as directed by Engineer-in-charge complete
Providing and fixing 1st quality antiskid ceramic glazed floor tiles of minimum 300 - 600 mm long and 300 - 600 mm wide and thickness not less than 6 mm conforming to IS 15622 of approved make in all colours and shades as approved by Engineer-incharge over a bed of 20 mm thick bed of cement mortar 1:4 (using crushed sand) and jointing with grey cement slurry including pointing with white cement based Tile grout of approved make and matching shade complete as per patterns, drawings and specifications complete as directed by the Enginner-in-charge
Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS 15622 of approved make. shade and colour of size ranging from 300 - 600 mm long and 300 mm - 600 mm wide and thickness not less than 6 mm as approved by Engineer-incharge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 (using crushed sand), setting the tiles in cement slurry and pointing the joints with matching colour Tile grout of approved make of matching shade including using PVC tile trim in the exposed corners, complete as per drawings, patterns and specifications complete as directed by the Engineer-in-charge.
Providing and fixing 1st quality approved make - Digital highlighter 300 x 600 mm - wall tiles as approved by Engineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 (using crushed sand), setting the tiles in cement slurry and pointing the joints with matching colour Tile grout compound of approved make of matching shade complete as per drawings, patterns and specifications complete as directed by the Engineerin-charge.
Providing and laying minimum 25 mm thick uniform shade Kotah stone flooring over 20 mm thick (Avearge) base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing in minimum three levels to obtain mirror polish complete with base cement mortar 1:4 (using crushed sand) all as per specifications, patterns and drawings complete.
Providing and Laying Minimum 25 mm thick uniform shade Kotah stone treads and risers of steps, skirting,window sills in single length up to 2.00 metres length slab dado and pillars laid on 12 mm thick (average) cement mortar 1:3 (using crushed sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing to obtain mirror finish complete as per specifications, drawings and as directed by the Engineer-in-charge
Extra for nosing in steps of treads Using Kotah stone
Providing and repairing to internal plaster in cement mortar 1:4 (using crushed sand) of thickness 12 mm to 20 mm in patches of area up to 2.5 sq metres including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls, including disposal of rubbish to the dumping ground within 50 metres lead
Providing and fixing 15-17 mm thick gang saw cut mirror polished (premoulded and prepolished) machine cut Granite of Telephone Black colour for kitchen platforms, vanitiy counters, Wash basin Counters, Door Frames, window sills, facias and similar locations of required size, colour and texture laid over 20 mm thick base cement mortar 1:4 (using crushed sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing the edges to give high gloss finish etc. complete as directed by the Engineer-in-charge at all levels.
Extra for providing edge moulding to 15-17 mm thick Granite work including machine polishing to edge to give high gloss finish etc. Complete as per design approved by Engineer-in-charge.
Dismantling flushing cistern of any size including stacking of useful materials near the site and disposal of unserviceable materials within 100 m lead
Providing and fixing White Vitreous china Orissa pattern W.C. pan of size 580x440 mm of apperoved make with 100 mm China ware P or S trap, One no. 10 litre High level or low level white PVC flushing cistern with flush pipe & bend with manually controlled device (handle lever) conforming to IS:7231, PVC 15 mm Inlet connection with all fittings and fixtures complete including all connection, embedding in position commissioning, cleaning etc. all as per drawings and specifications and as directed by the Engineer-in-charge.
Providing and fixing white vitreous China universal pedestal type water closet (Anglo Indian type W.C. pan) with seat and lid, 10 litre low level white PVC flushing cistern with manually controlled device (handle lever) conforming to IS:7231, flush bend, fixing EWC with C.P brass screws, 15 mm PVC heavy quality inlet connection of 450 mm long, including testing , commissioning & cleaning etc. complete all as per drawings and specifications and as directed by the Engineer-in-charge
Providing and fixing white vitreous china flat back half stall urinal size 580x380x350 mm / 610 mm of approved make Aquaseal model with Push cock of approved make,with CP brass flush pipe unions, heavy quality C.P. brass spreaders, C.P waste coupling with dome grating, clamps complete all as per specifications drawings and as directed by the Engineer-in-charge.
Providing and fixing White vitreous China wash basin size 550 x 400 mm/ 550 x 420 mm and equivalent sizes with single 15 mm C.P. brass pillar tap of approved make,15 mm x 600mm long PVC Inlet connection, 32 mm heavy quality C.P. brass waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls and testing complete all as per specifications and as directed by the Engineer-in-charge
Providing and fixing 6 mm thick mirrors of size 600 x 450 mm of approved make with bevelled edges complete with 6 mm thick asbestos sheet back ground fixed to walls with C.P. brass screws and concealed washers complete. all as per specifications and as directed by the Engineer-in-charge .
Providing and repairing to external plastering in cement mortar 1:4 (using crushed sand) of thickness 12 mm to 20 mm in patches of area up to 2.5 sq metres including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls ncluding admixtured with approved Water proofing compound @ 2% by weight of cement used and as per manufacturer's specifications ,sieving of sand to required fineness complete including disposal of rubbish to the dumping ground within 50 metres lead
Providing structural repairs in old damaged concrete structures / surfaces with approved Polymer with following operations 1) Removal of loose/Spalled or damaged concrete by chipping and cleaning the concrete surface and reinforcement steel with wire brush and with water 2) Cleaning the re bars with Acetone for complete rust removal and washing with water to make the surface clean. 3) Applying protective coat / bond coat using polymer and cement in the proportion of 1; 1.5 (1 part of polymer and 1.5 parts of cement in synthetic enamal paint like consistancy with brush 4) Reinstate the area with polymer modified mortar in layers of maximum 20 mm with the proportion of Cement 50 Kg : washed and dried river sand 87.50 kg ; silica sand 37.50 Kg. mixed with 10 litres of Polymer (or 1 Kg cement : 1.75 kg washed and dried river sand ; 0.75 Kg silica sand : 200 ml polymer)5) If thickness of repair exceeds 20mm , after every 20 mm thick repair, bond coat as per 2 above to be applied and further thick of repair to be continued for each layer. This work is inclusive of all materials, labour, complete all as directed at site using approved polymer suitable for structural repair shall be used. Note: Scaffolding will be paid separately under relevant item
Providing SFMC Micro concrete Using SFMC with 50% Quartz aggregate by weight (Only SFMC consumed alone will be measured for payment) for strengthening of structural members including mixing, pouring, curing as per manufacturer specifications and as directed by the Engineer-in-charge
Providing , centering ,shuttering Form work by using steel plates, timber planks for PCC and minor structures including necessary strutting, proping, without staging, supports etc and deshuttering the same after the specified time all as per drawings, specifications and as directed by the Enginner-in-charge
Plain shuttering
Circular & curved shuttering
Providing and fixing double tubular scaffolding system using Hframes with cup lock type on the exterior side upto seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre horizontal and vertical tubes joining with cup and lock system with M.S. tubes, M.S. tube challies, M.S clamps and M.S staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connection with building etc. wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and as approved by the Engineer -in - charge. The elevational area of the scaffolding shall be measured for payment purposes. The payment shall be made once irrespective of duration of scaffolding
Providing and painting with two coats with oil bound distemper of approved make and manufacturer to give an even approved shade and including priming coat with one coat of cement primer including preparation of sufaces, filling with putty if required, scaffolding complete as per specifications and as directed by the Engineer-in-charge
Removing white or colour wash, distemper, external paint by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete all as directed at site including scaffolding, cleaning of the areas.
Providing and applying white cement based wall putty of approved make over concrete or Plastered surface up to 3 mm thick to get uniform surface free from undulation including cleaning complete all as directed by the Engineer-in-charge .
Providing and applying wall painting two coats with premium plastic emulsion paint of approved brand to give an even shade, including a coat of approved cement primer, including preparation of the surfaces, scaffolding complete. as per specifications and as directed by the Engineer-in-charge
Providing , painting and finishing walls with two coats of exterior emulusion paint of approved make on sand face plaster/ plain plaster & concrete of required shade including base coat of water proofing cement paint, preparation of the surfaces, scaffolding complete. as per specifications and as directed by the Engineer-in-charge.
Providing and Painting two coats of synthetic enamel paint on steel surfaces of approved brand and manufacture to give an even shade over a primer coat for member of trusses, purlin etc. upto height of 12m. including preparation of the surfaces, scaffolding complete. as per specifications and as directed by the Engineer-in-charge. 'Note : The mobile scaffolding will be supplied by the department at free of cost. The contractor has to transport & fix the mobile scaffolding as per the location of site.
Providing and Painting two coats of synthetic enamel paint on steel surfaces of approved brand and manufacture to give an even shade over a primer coat.including preparation of the surfaces, scaffolding complete. as per specifications and as directed by the Engineer-in-charge
Demolishing Stone rubble masonry (In cement mortar) manually / by mechanical means carefully without damaging adjacent structures including stacking of serviceable materials and disposal of unserviceable materials within 100 m lead as per direction of Engineer-in-charge
Providing and constructing Brickwork in cement mortar 1:6 using crushed sand with Flyash / Flyash Lime bricks with minimum 70 kg / Sq. cm strength of approved make and size in Sub structure including, scaffolding, raking out joints, curing, cleaning complete all as per specifications and drawings.
Providing and laying in position cement concrete of 1:1.5:3 at all levels (1 cement, 1.5 crushed sand, 3 graded stone aggregate of nominal size 20 mm) including consolidation, finishing, curing etc.. complete as per specifications and drawings but excluding the cost of shuttering, centering and steel reinforcement.
Providing Reinforcement Steel for reinforced cement concrete at all levels including supplying, preparation of bar bending schedules, cutting, bending, transporting, fixing, tieing in position with PVC coated G.I binding wire, all labour charges, cost of cover blocks in specified grade of concrete etc. complete as per specifications and drawings.
Using TMT bars of specified grades all dia bars. TMT bars to be supplied by the contractor confirming to IS:1786.
Providing 20 mm thick External plastering in two coats under layer 12 mm thick with C.M 1:4 (using crushed sand) finished with a top layer 8 mm thick in C. M 1:3 (using crushed sand) including approved water proofing compound @ 2% by weight of cement or as per manufacturer's specifications, sieving of sand to required fineness, scaffolding up to 10 metres height, finishing, curing etc. complete as per specifications. and as directed by the Engineer-incharge.
Removing bitumen based water proofing treatment form terrace, chajjas etc. dosposing within 50 mtr .
Providing chemical based waterproofing of modified acryllic emulsion polymer and Elastomeric water proof coating of approved product over terrace slab/ parapet/side wall etc., at all elevations including polycon based fibrous net including cleaning the surface and testing by ponding water complete using Indofil MC- 76 and Flex Coat-WP or approved equivalent as per manufacturer's specifictions as follows: '1. Remove all lose materials by wire brush and clean entire terrace completely by clean water. Use wherever required water jet (Pressure required 10 kg./Sq.cm). '2. Open all visible cracks using plaster Cutter machine / chisel in "V" shape up to crack depth. '3. Dilute Indofil binder with water in the ratio 1:4 and pour on the bare slab to be treated. This will penetrate the pores of concrete. '4. Apply Indofil binder and cement in the ratio of 1:1 based primer inside and adjacent to the cracks. '5. Fill the cracks with Indofil binder : Quartz Sand: Cement in the ratio 1:5:15 and water to be added to achieves the paste like consistency. '6. Apply the bond coat of Indofil binder and cement in the ratio of 1:1 to entire terrace. '7. Seal all joints such as collar joints of the drain water outlet using Indofil binder : Cement: Quartz Sand in the ratio of 1:5:15 + water for paste consistency. '8. Apply a coat of Indofil binder and Cement bond coat over above surface in the ratio of 1:1 i.e. (It is recommended that the surface can be dampen before applying 1st coat of mix of Indofil binder & cement or as per manufacturer's specifications). '9. Lay the Polycon based Fibrous waterproofing net ( Polyester Geotextile of min. 80 GSM) for entire area of terrace including lapping immediately after applying bond coat. ( To be laid immediately before drying 1st coat of Indofil binder and cement). '10. Apply one more coat of Indofil binder and cement on above fibrous net (Geo textile) in the ratio of 1:1 (can be applied within 12-18 hours of fibrous net laying). 11. To protect the polymer film and to enhance the life of coating, apply two coats of Indofil Flexcoat- WP @ 0.42 Kg/SqM for two coats minimum (Elastomeric water proofing exterior coating) over above surface with dilution 10% weight of potable water. '12. The above treatment should be done over terrace slab of any shape, parapet, gutter, etc. complete as per directions of Engineer-in-charge. '13. Terrace surface to be tested for waterproofing - 7 days by ponding water over treated surface. 'Notes: 1. The entire work shall be carried out as per manufacturer's specification and as directed by the Engineer-in-charge. The contractor shall furnish guarantee bond on appropriate stamp paper in the proforma as per Appendix "D" for the entire water proofing treatment in bone dry condition for 5 years, backed by manufacturer. During the guarantee period contractor shall attend all leakages, defects etc., if noticed, free of cost, starting the work of checking up and rectification within a week's time from the date of intimation about such leakages/defects. '2. Contractor shall maintain log book for consumption of materials. '3. Minimum average consumption: i) MC-76- should not be less than 0.8 Kg/Sq.M ii) Flex coat - should not be less than 0.42 Kg/Sq.M
Providing and fixing anodized aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / Z sections and other sections of approved make conforming to IS 733 and IS 1285 fixed with rawl plugs and screws or with fixing clips or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC / neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically whereever required including cleat angle, aluminium snap beading for glazing / panelling, C.P brass / stainless screws all complete as per drawings and and directions of Engineer-in-charge including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of PVC / neoprene gasket required filling the gaps using silicon grout sealent etc. (fittings glazing and panelling shall be paid for separately) NOTE : 1) The rates for aluminium is inclusive of all fastners required for fabrication and fixing in the walls. 2) All joints shall be of mittered Joints 3) A long M.S rod threaded at both ends to be provided in all aluminium door shutters in Top & bottom Horizontal members internally connecting Vertical members and fixed with M.S washers & nuts. 4) Only Aluminium members alone shall be measured and paid for.
Anodised Aluminium sections (Minimum anodizing thickness of 15 micron)
Extra for colour anodizing
Supplying, providing and fixing 22 guage stainless steel net (for mosquito prevention) to aluminum grill / frame including cost of drilling holes, cutting, wastages, wooden gutty, stainless steel screws, tools, tackles, labour, etc. all complete as directed by Engineer-in-charge.
Providing and fixing approved quality and shape star locks cum handle of approved make for sliding shutters
Providing and fixing approved quality stain less steel body roller wheels of approved make for sliding shutters
Providng and fixing Aluminium Grill 10 mm thick "DECO GRILLE" make Model No. DG- 102 in natural Silver anodising of min 15 Microns with a opening size of 80mm x 66mm and Minimum weight of 3.260 Kg/Sq.M including providing anfd fixing Suitable 'F' / 'H' section outer frame and mullion fixing with screws complete all as per specifications and as directed at site by the Engineer-in-charge. Aluminium alloy shall be of 6063-T6 with yield strength of minimum 6.5 kg/ sq.mm.
Extra for providing Aluminium Grill 10 mm thick with colour anodised by the manufacturer (Champagne, black, Bronze, Gold colours) complete all as per specifications and as directed at site by the Engineer-in-charge
Providing and fixing glazing With clear float glass panes of 4.0 mm thickness in aluminium doors, window, ventilator shutters and partitions etc with PVC / Neoprene gasket etc. complete as per the architectural drawings and directions of the Engineer-in-charge (Cost of snap beading shall be paid in basic item)
Providing and fixing glazing With frosted glass panes of 5.00 mm thickness in aluminium doors, window, ventilator shutters and partitions etc with PVC / Neoprene gasket etc. complete as per the architectural drawings and directions of the Engineer-in-charge (Cost of snap beading shall be paid in basic item)
Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismantling and stacking within 100 m lead
Providing Structural steel work using angles, channels, joists and other sections, welded and / or bolted in built up sections for trusses , structural steel floors, frame works, monorails and other structures including supplying, cutting, welding, fabricating, hoisting, fixing in position, applying a priming coat of approved steel primer etc. complete all as per specifications, drawings and as directed by the Engineer in charge. Up to and including 300 mm Joists, 350 mm channels, and below sections using materials of approved manufacturers confirming to IS:2062. All test reports to be provided along with the supply of the materials. 'Important Note: '1. Structural steel confirming to IS 2062 shall be supplied. '2.The contractor shall supply documentary evidence of purchase of steel, Test certificate from approved manufacturers and also third party testing from approved laboratories with out any extra cost. '3.Welding weights, connections, bolts and nuts shall not be measured for payment but the cost of which shall be deemed to have been included in the rates. '4.Welding Electrodes manufactured by M/s. Advani Oerlicon / ESAB India & D& H of specified suitable grade only shall be used. '5. Holes to be drilled only by Drilling machines and gas cutting of holes are not permitted. '6. Rate inclusive of all consumables like GAS, welding electrodes and tools and tackles etc.
Lead charges for Debris Beyond lead Exceeding 4 KM not exceeding 5 KM, by mechanical transport includinmg loading,unloading, stacking / levelling etc. 'Note: The rates in respect of this Item are applicable for NET Quantities arrived at after making deduction for voids @ 30% from corresponding TRUCK Measurement
Providing, supplying, fixing in position, under floors or in walls sand cast iron pipes including required specials like bends, tees, 'Y' collars, cowl etc for soil, waste and ventilation pipes conforming to IS.1729 of approved make including cost of jointing with spun yarn and molten lead of specified quantity, caulking the joints, including testing of pipes, painting with primer, fixing at walls with necessary approved type of clamps and brackets complete all as per drawings and specifications and as directed at site.
75 mm dia sand cast iron S&S pipe as per IS:1729 with 0.90 kg lead / joint
100 mm dia sand cast iron S&S pipe as per IS:1729 with 1.00 kg lead / joint
Providing and fixing Heavy quality PVC waste pipe of 32 mm dia. (semi rigid or flexible) of approved make for sink or wash basin including PVC waste fittings etc. complete all as per specifications and as directed by the Engineer-in-charge
Providing and fixing Chinaware Half round Urinal channel 100 / 150 mm dia with or without dead ends set in C.M 1:3 laid to proper slope & grade including finsihing the joints with polymer based tile grout mix as per drawing and as directed by the Engineer-incharge
Providing and fixing heavy quality stainless steel / C.P brass grating of approved equvalent make as specified for floor traps / nahani traps all as directed by the Engineer-in-charge
SS grating 125 mm dia
SS grating 150 mm square with frame
Providing and fixing PVC rain water SWR PIPE 110 mm O/D conforming to relevant IS type B and PVC SWR fittings & specials conforming to relevant IS including jointing with seal ring / With PVC solvent adhesive including fixing in walls using clamps etc complete all as per drawings, specifications and as directed by the Engineer-in-charge
Providing and fixing on wall face unplasticised - PVC moulded fittings / accessories for unplasticised rigid PVC rain water pipes conforming to IS:13592 Type A including jointing with seal ring conforming to IS:5382 leaving 10 mm gap for thermal expansion. 110 mm Dia Coupler
Providing and fixing cast iron nahani trap / floor trap of 100 mm inlet and 75 mm outlet, (weighing 5.80 Kg each), jointing with lead with the connection pipes, placing as per the drawings, embedding in cement concrete 1:2: 4 and making circular hole up to floor level using 110 mm O/D PVC pipes of 6 Kg / sq.cm pressure and fixing 1 No 125 mm dia C. P brass grating , complete all as specifications and drawings and as directed by the Engineer-incharge
Making connection of drain or sewer line for pipe 100 to 230mm diameter with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix cement plastered on both sides with cement mortar 1:3 finished with a floating coat of neat cement and making necessary channels for the drain etc. complete.
Dismantling brick work in Cement mortar carefully without damaging adjacent structures including stacking of materials and dispoal of unserviceable materials within 100 m lead as per direction of Engineer-in-charge
Providing Second class teak wood work in frames of doors, windows, clear story openings and other frames, wrought framed and fixed in position of required size and shape including sawing, jointing,making rebates for shutters, making grooves as shown in the drawings, finishing the surfaces to the required finish all as per specifications and drawings including necessary MS hold fasts 40 mm X 3 mm thick, 200 mm long / with coach screws including protective painting to the suface that will come in contact with walls, joining materials, labour etc. complete all as per specifications and as directed by the Engineer-in-charge
Dismantling roofing of G.S Sheet / FRP Sheet / AC Sheet etc. including ridges, valleys and gutter etc and stacking the material within 50 m lead
Providing Asbestos cement 6 mm thick corrugated sheets (as per IS:14871) roofing upto any pitch and fixing with G.I J or L hooks, bolts and nuts 8 mm dia G.I. plain and bitumen washers or with self drilling fastenerand EPDM washers etc. complete excluding the cost of purlins,rafters and trusses corrugated sheets and including cutting to size and shape wherever required complete as directed by the Engineer-in-charge
Asbestos sheet roofing without ridges.
Providing and fixing ridges in Asbestos cement roofing with suitable fixing accessories or self drilling fastener and EPDM washer close fitting adjustable ridges etc. complete as directed by the Engineer-in-charge.
Providing and fixing APP (Atactic Polypropylene Polymer) modified pre fabricated five layer, 3 mm thick water proofing membrane, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 ltr/sqm or as per manufacturer specifications by the same membrane manuifacturer. Over the primer coat the layer of membrane shall be laid using Butane torch and sealing all joints etc. with lappingof 10 mm and 150 mm on sides and ends respectively and preparing the surface complete. and applying refective coating red oxide on top of the finished surface. (The laying of membrane shall be got done through the authorized applicator of the manufacturer of membrane complete as per specification and as directed by the Engineer-in-charge
ORIENTAL INTEGRATED FACILITY MANAGEMENT PVT. LTD.
stage.html
html • 0.04 MB
techsummary_745763.pdf
PDF • 0.25 MB
BOQ Comparative Chart
xlsx • 0.02 MB
finsummary_745763.pdf
PDF • 0.31 MB
CEDWO47AMCons.pdf
PDF • 11.62 MB
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .