Completion of incomplete/balance Works for Repair/Replacement to Water Filtration Beds, Clariflowculator and connected items at Tawi, Jib Filter Plant and other locations under GE (Utilities) Udhampur

Select, Excess (+), Less (-) Less (-)

Tender Inviting Authority: GE Utilities Udhampur

Name of Work: Completion of incomplete/balance works for Repair/Replacement to Water Filtration Beds, Clariflowculator and connected items at Tawi Filter Plant and other locations under GE (Utilities) Udhampur.

Contract No: GE/U-77/2025-26

Ser. No. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category

Dismantling of old worn out flow controller arrangement and supply & fixing of new flow controller arrangement suitable for capacity 6 x 40,000 1x20000 Glns/hours output discharge including necessary fixing arrangement as required at site for smooth functioning of the filtration system at Tawi filter plants, complete all as specified and directed by Engr-in-Charge. Note:- The quoted rate shall vbe deemed to include the cost of supply of all accessories, fittings, supports, mounting arrangements and any other items whatsoever required for proper installation, testing and commissioning of the system, complete and functional BI01010001010000000000000515BI0100001132 Each Job 0.0000 Excess(+) Full Conversion INR

Dismantling of old worn out flow controller arrangement and supply & fixing of new flow controller arrangement suitable for capacity 4 x 25,000 Glns/hours output discharge including necessary fixing arrangement as required at site for smooth functioning of the filtration system at MH, complete all as specified and directed by Engr-in-Charge. Note:- The quoted rate shall vbe deemed to include the cost of supply of all accessories, fittings, supports, mounting arrangements and any other items whatsoever required for proper installation, testing and commissioning of the system, complete and functional BI01010001010000000000000515BI0100001133 Each Job 0.0000 Excess(+) Full Conversion INR

Dismantling of old unserviceable clear water flow meter, pedestal type floor mounted and supply and fixing of new flow meter, pedestal type, floor mounted reading 0 to 600, Rate of flow x 100 GPH and designed to indicate flow upt to 1.5 tiems the average flow for 40,000 ,20000 & 25000 Glns per hour complete with non corrosive dial, indicator needle , stainles steel cord, FRP float and countr weight, including necessary fixing arrangement etc, at Tawi filter plants, complete all as specified and directed by Engr-in-Charge. Note:- The quoted rate shall vbe deemed to include the cost of supply of all accessories, fittings, supports, mounting arrangements and any other items whatsoever required for proper installation, testing and commissioning of the system, complete and functional BI01010001010000000000000515BI0100001134 Each 0.0000 Excess(+) Full Conversion INR

Dismantling of old unserviceable loss of head meter pedestal type, flow mounted single column and supply and fixing dail type, pedestal, mounted, single water column loss of head, Gauge, suitable for indicating loss of head through filters of Rapid sand filler at filteration plant upto 2.5 meters, comprising dail type pedestal mounted LoH indicator complete with stilling chamber, cord and cord-casing pipe, including all necessary accessories, fittings and supports, complete in all respects, all as specified and as directed by Engr in-Charge. Note:- The quoted rate shall be deemed to include the cost of supply of all accessories, fittings, supports, mounting arrangements and any other items what so ever requied for proper installation, testing nd commissiong of the system complete and functional. BI01010001010000000000000515BI0100001135 Each 0.0000 Excess(+) Full Conversion INR

Repairing of PCC alum solution tanks agitators made out of as existing with plastering and tiling if reqd to make it serviceable driven by worm reduction gear of type 1.75 VSD 10.1 ratio couple including supply and fix New 2x1HP TEFC motor 1440 RPM for each job CG Kirloskar Phillips or equivalent make fixed on common base frame as per site requirement including necessary fixing arrangement etc at Tawi Filter Plant and MH plant in clarifloculator jib and hopper tank filtration system with cable work for connection from starter to motor, complete all as specified and directed by Engr-in-Charge. BI01010001010000000000000515BI0100001136 Each Job 0.0000 Excess(+) Full Conversion INR

Material and labour for repairig the float valve system of the beds including the welding work, float gauge (x100 filter in GPH) and connected items which are reqd for the smooth functioning of system, complete all as specified and directed by Engr-in-Charge. BI01010001010000000000000515BI0100001137 Each Job 0.0000 Excess(+) Full Conversion INR

Supply and fixing of 300mm dia flat seat mushroom type valve for discharging the wash water into waste channel with extended spindle made out of 32mm MS rod operatable from working plateform including guide bracket as per site requirment and CI hand wheel including dismantling of old unserviceable flat seat mushroom valve including neceesary fixing arrangement etc. at Tawi filtration plant, complete all as specified and directed by Engr-in-Charge. BI01010001010000000000000515BI0100001138 Each 0.0000 Excess(+) Full Conversion INR

Supply and fixing of 350mm dia flat seat mushroom type valve for discharging the wash water into waste channel with extended spindle made out of 32mm MS rod operatable from working plateform including guide bracket as per site requirment and CI hand wheel including dismantling of old unserviceable flat seat mushroom valve including neceesary fixing arrangement etc. at Tawi filtration plant, complete all as specified and directed by Engr-in-Charge. BI01010001010000000000000515BI0100001139 Each 0.0000 Excess(+) Full Conversion INR

Taking out complete old filter media of following type/size capacity 6x40000,4x25000 &1x20000 gallons per hrs from bed of filteration plant and stacked at clear places out side of the filteration plant for removal from site complete including cleaning/washing of filter bed and floors with bleaching powder/chemical and removal of all dirts, silt, mud etc by using brush for filteration plant, complete all as specified and directed by Engr-in-Charge :- BI01010001010000000000000515BI0100001140

Filter media (Grit & Gravel) of size 4mm to 12mm in layers, complete all as specified and directed by Engr-in-Charge. BI01010001010000000000000515BI0100001141 Cum 0.0000 Excess(+) Full Conversion INR

Filter media (Grit & Gravel) of size 12mm to 20mm in layers, complete all as specified and directed by Engr-in-Charge. BI01010001010000000000000515BI0100001142 Cum 0.0000 Excess(+) Full Conversion INR

Filter media (Grit & Gravel) of size 20mm to 40mm in layers, complete all as specified and directed by Engr-in-Charge. BI01010001010000000000000515BI0100001143 Cum 0.0000 Excess(+) Full Conversion INR

Filter media (Grit & Gravel) of size 40mm to 60mm in layers, complete all as specified and directed by Engr-in-Charge. BI01010001010000000000000515BI0100001144 Cum 0.0000 Excess(+) Full Conversion INR

Filter media quartzite sand of size 600mm depth conforming to CPHEEO manual, complete all as specified and directed by Engr-in-Charge. BI01010001010000000000000515BI0100001145 Cum 0.0000 Excess(+) Full Conversion INR

Segregation of filter media obtained from item No.9.00 here in before by using seives analysis and stacking the same grade wise and further segregation/screening (by using machanised seiries machine) of defective and serviceable filter media manually grade wise of the following grade, complete all as specified and directed by Engr-in-Charge. :- BI01010001010000000000000515BI0100001146

Filter media (Grit & Gravel) of size 4mm to 60mm in layers, complete all as specified and directed by Engr-in-Charge. BI01010001010000000000000515BI0100001147 Cum 0.0000 Excess(+) Full Conversion INR

Filter media quartzite sand of 600mm depth conforming to PHE manual, complete all as specified and directed by Engr-in-Charge. BI01010001010000000000000515BI0100001148 Cum 0.0000 Excess(+) Full Conversion INR

Cleaning/washing of serviceable filter media by spreading clean pressure water using compressor/pump set including acid washing and kept in the water reserviors for 24 hours miniumum for removing all scaler dirt/muds/foreign materials etc and finally wash with clear portable water of following filter media and stack seprately for reuse as per site requirement, complete all as specified and directed by Engr-in-Charge :- BI01010001010000000000000515BI0100001149

Filter (Grit & Gravel) of size 4mm to 12mm in layers, complete all as specified and directed by Engr-in-Charge. BI01010001010000000000000515BI0100001150 Cum 0.0000 Excess(+) Full Conversion INR

Filter (Grit & Gravel) of size 12mm to 20mm in layers, complete all as specified and directed by Engr-in-Charge. BI01010001010000000000000515BI0100001151 Cum 0.0000 Excess(+) Full Conversion INR

Filter (Grit & Gravel) of size 20mm to 40mm in layers, complete all as specified and directed by Engr-in-Charge. BI01010001010000000000000515BI0100001152 Cum 0.0000 Excess(+) Full Conversion INR

Filter (Grit & Gravel) of size 40mm to 60mm in layers, complete all as specified and directed by Engr-in-Charge. BI01010001010000000000000515BI0100001153 Cum 0.0000 Excess(+) Full Conversion INR

Filter quartzite sand of size 600mm depth conforming to PHE manual, complete all as specified and directed by Engr-in-Charge. BI01010001010000000000000515BI0100001154 Cum 0.0000 Excess(+) Full Conversion INR

Packing only carefully old serviceable filter media obtained from item No. 11.00 here in before complete all as directed of following size:- BI01010001010000000000000515BI0100001155

Filter media (Grit & Gravel) of size 4mm to 60mm in layers, complete all as specified and directed by Engr-in-Charge. BI01010001010000000000000515BI0100001156 Cum 0.0000 Excess(+) Full Conversion INR

Filter media quartzite sand of 600mm for laying with machanised method depth conforming to CPHE manual, complete all as specified and directed by Engr-in-Charge. BI01010001010000000000000515BI0100001157 Cum 0.0000 Excess(+) Full Conversion INR

Supply and packing carefully filter media 600mm in depth free from clay, dirt smooth and round/oval quartizite sand from natural source and machanised graded suitable for water filtration plant for drinking water, complete all as specified and directed by Engr-in-Charge :- BI01010001010000000000000515BI0100001158

S&F Filter media (Grit & Gravel) of size 4mm to 60mm in layers, complete all as specified and directed by Engr-in-Charge. BI01010001010000000000000515BI0100001159 Cum 0.0000 Excess(+) Full Conversion INR

S&F Filter media Quartzite sand of 600mm depth conforming to PHE manual source brakar, Godhra, Babina including transportation, complete all as specified and directed by Engr-in-Charge. BI01010001010000000000000515BI0100001160 Cum 0.0000 Excess(+) Full Conversion INR

Removing of unserviceable filter media and Quartzite sand from work site to the low laying area not exc 100m from filteration plant, complete all as specified and directed by Engr-in-Charge. BI01010001010000000000000515BI0100001161 Cum 0.0000 Excess(+) Full Conversion INR

Note: for item No:- 07 to 13 (i) Commissioning and testing of complete filter bed 6x40000 ,,4X25000 &1x20000 GPH satisfactory in continous operation and observed defect will be redone by the contractor without any extra cost to the department, complete all as specified and directed by Engr-in-Charge. (ii) The above work is in replacement/ reuse of serviceable complete filter media of 06x40000,4X25000 & 1x20000 GPH at Tawi filteration plant MH & Jib. All items required for the same has been catered in the sch . However the contractor will visit the site before quoting and assess the requirment as majorty of items are typical in nature and required as per site conditions. Contractor will supply the items for commissioning and testing both the filteration plant as directed by GE/Engr-in-Charge. Any additional minor items required at site during execution shall be deemed to be included in the rate quoted for respective items of BOQ. (iii) The work should be first caried out in for 3x40000 GPH filter bed and will complete it duly tested and commissioned to the satisfaction of Engr-in-Charge for smooth fuctioning of water supply in this station. BI01010001010000000000000515BI0100001162

M&L for Scraping down with steel iron brush the entire filter walls and bottom surface, complete all as specified and directed by Engr-in-Charge. BI01010001010000000000000515BI0100001163 Sqm 0.0000 Excess(+) Full Conversion INR

S&F for Cast iron air control valve of size 80mm dia (PN-1.6) ISI marked suitable for compressed air pipe line for back washing of filter bed both end flanged, stainless steel spindle non rising type complete with neoprene rubber gasket nuts bolts and washer etc including taking down of old unserviciable CI control valve and necessary fixing arrangement etc, complete all as specified and directed by Engr-in-Charge. BI01010001010000000000000515BI0100001164 Each 0.0000 Excess(+) Full Conversion INR

S&F V' Notch plate of S/S (304) sheet 4mm thick width of 300mm (as per existing specification) including fixing in open water flow channel as per existing site requirement for 6x4000 GPH tawi filter plant & Jib tank including suitable necessary fixing arrangement with nuts, bolts and washers etc, complete all as specified and directed by Engr-in-Charge. BI01010001010000000000000515BI0100001165 RM 0.0000 Excess(+) Full Conversion INR

S&F Cast iron fittings (in repair) for spigot and socket ends for pressure pipe for water mains such as bends, tapers tee pieces single branch, cross collar, caps and plugs suitable for 80 to 300 mm bore, all specifications as per existing, including taking down the old existing unserviceable CI fittings, complete all as specified and directed by Engr-in-Charge. BI01010001010000000000000515BI0100001166 Kgs 0.0000 Excess(+) Full Conversion INR

M&L frame work such as grills, gratings etc with ends of bar shouldered and riveted or forged bars barred iron doors ladders frames balusters, walk ways frame work of water tank including applying one coat of sythetic enamel paint to the metalic steel surfaces after primer coat of red oxide as required at site and neessary fixing arrangement etc similar work conforming to Fe 290 Gde E-165 including taking down old unserviceable mild steel frame work, complete all as specified and directed by Engr-in-Charge. BI01010001010000000000000515BI0100001167 Kgs 0.0000 Excess(+) Full Conversion INR

Supply & Laying multicore PVC insulated and FR-LHS PVC round sheatehed, copper conductor(flexible) industrial cable 1100 volt grade confirming to Is 694 , 2.5 sqmm 1 core including suitable size PVC conduit laid, complete all as specified and directed by Engr-in-Charge. BI01010001010000000000000515BI0100001168 RM 0.0000 Excess(+) Full Conversion INR

Supply & Laying multicore PVC insulated and FR-LHS PVC round sheatehed, copper conductor(flexible) industrial cable 1100 volt grade confirming to Is 694 , 6 sqmm 4 core including suitable size PVC conduit laid, complete all as specified and directed by Engr-in-Charge. BI01010001010000000000000515BI0100001169 RM 0.0000 Excess(+) Full Conversion INR

Taking up or down GI pipe of following sizes including all fittings, complete all as specified and directed by Engr-in-Charge :- BI01010001010000000000000515BI0100001170

Bore of pipe 40mm dia, complete all as specified and directed by Engr-in-Charge. BI01010001010000000000000515BI0100001171 RM 0.0000 Excess(+) Full Conversion INR

S&F GI pipes (in repair) of following sizes, medium grade, galvanized with all fittings such as bends, tees, nipples, union and sockets, clamps etc laid in trenches, under floor/walls etc complete, all as specified and directed by Engr-in-Charge. BI01010001010000000000000515BI0100001172

Bore of pipe 40mm dia, complete all as specified and directed by Engr-in-Charge. BI01010001010000000000000515BI0100001173 RM 0.0000 Excess(+) Full Conversion INR

Supply, installation, testing and commissioning of 250 mm dia, single phase, Motor actuated butterfly valve with disc material SS-304, Stem material SS-410, Seat EPDM, hand wheel for manual operation and having 05 nos limit switches for open/close condition, valve position indicator and over ride trip. The housing of actuator should be of aluminum dicast. The actuator must have planetary gear set to transfer the largest torque in the most compact form. The mounting shall be indirect on valve type. Input voltage: 230V AC Designed line pressure: 16Kg/Sq CM Gear set type : Planetary Gear Set Working Torque: 200 Nm Inbuilt CPU: Quad-core 64-bit ARM Cortex A53 clocked at 1.2 GHz Inbuilt 4 USB 2 Ports Inbuilt Base Ethernet Port Inbuilt Micro SD Port for loading your operating system and storing data Inbuilt wireless LAN and Bluetooth low energy The mounting shall be indirect type using specialized extended type arrangement of GI pipe of suitable size/thickness, so that actuator mounting is at least 15 feet above pope level complete all as specified and directed by Engr-in-Charge. BI01010001010000000000000515BI0100001174 Each Job 0.0000 Excess(+) Full Conversion INR

Note:- Wiring & testing of Motorized butterfly valve shall be carried out by authorized system integrator of the provided makes. The Engineer shall submit a letter from the OEM as proof of his being an authorized system integrator ot the OEM. The Engineer shall also submit a signed report on origiinal letter head of the OEM that wiring & testing has been carried out by him. Make of Actuator: Samson/Universal switch gear control/Emerson/Rotork/Auma Make of Butterfly: L&T/Audco/Kirloskar BI01010001010000000000000515BI0100001175

Repair/Maintenance and replacement of defective parts of the clarifloculator such as stainless steel scraper blades, rake arm riser pipes, sludge box, sludge discharge pipe line of the clarifloculators motor sets 03 Nos use in the system of clarifloculators 1.5 Lakhs gallons per hours capacity. Re-greasing all grease points in the motors and gear system, tighten the nuts, bolts, checking of all bearings and replacement of defective bearings with new bearings, check gear system and changed with new of defective gears, check all the electric connections of 03 Nos motors and related panels and repair replacement the same, as per site requirment tighten the 'V' belts of the set and replace the same if any store reqd for this deemed to be included in quoted rates and examine the compressor, defective parts and replace with the new parts, complete all as specified and directed by Engr-in-Charge. BI01010001010000000000000515BI0100001178 Each Job 0.0000 Excess(+) Full Conversion INR

Repair/Maintenance and replacement of defective parts of air compressor set, capacity of 25 HP. Re-greasing all grease points, tighten the nuts, bolts of air compressor set, check the all bearings and replaced with new bearing if defected the same, check tighten the 'V' belts of the set and replaced the same if defected the same and examine the compressor defective parts and replace with the new parts, complete all as specified and directed by Engr-in-Charge. BI01010001010000000000000515BI0100001179 Each Job 0.0000 Excess(+) Full Conversion INR

Description all as per srl item No 28.00 here-in-before but of size 15 HP, complete all as specified and directed by Engr-in-Charge. BI01010001010000000000000515BI0100001180 Each Job 0.0000 Excess(+) Full Conversion INR

Description all as per srl item No 28.00 here-in-before but of size 10 HP, complete all as specified and directed by Engr-in-Charge. BI01010001010000000000000515BI0100001181 Each Job 0.0000 Excess(+) Full Conversion INR

S&F M S plates (plain or chequered) channels (as per existing specifications and site requirments), square cut or notched (ordinary and counter sunk) forming holes, without any attachment chequered sheet 4mm thick with frame work suitable for duct cover/ valve chamber/ flow controller chamber/ water flow meter chamber/ water head loss meter chamber etc, including fixing arrengment and necessary excavation/cleaning works, complete all as specified and directed by Engr-in-Charge. BI01010001010000000000000515BI0100001182 Kgs 0.0000 Excess(+) Full Conversion INR

Supply, Installation , testing and commissioning of indoor type weather proof, cubical type panel board totally enclosed with outer sheet shall be maid of 3.15mm thick and inner shell 2.0mm sheet CRCA sheet mounted on 60 cm long legs made out of 50x50x6 mm equal angle, embedded in PCC M-15, type B-1, front and back openable, double door openable up to minimum 150 degree, lockable/openable by keys from both sides having chromium plated locks, louvers and air vent gaskets for natural air flow suitable foamed in PU gasket to make it dust/vermin proof, powder coated and prewired as per standard engineering practice, and suitable to cable glands for cable entry and the panel shall accommodate the following equipments. The panel must be designed, and verified IS/IEC 61439-01 and 02 with complete test type certificate for conformance to, complete all as specified and directed by Engr-in-Charge :- Make of LT panel- Shcneider/Legrand/L&T or equivalent make as approved by E-in-C Branch. (a) Aluminium bus bar of capacity duly covered with colour coded shrinkable sleeves not less than 200 Amps for phases and neutral - 01 set. (b) Digital multifunction meter of size 96x96mm to measure current, voltage, frequency and power factor with built in selector switch and programmable CT of appropriate ratio - 01 Nos. Make:Siemens/L&T/ABB/Schneider/ Legrand/Hager/Cromptons greaves/ Hensal BI01010001010000000000000515BI0100001184 Each 0.0000 Excess(+) Full Conversion INR

(c) Panel indicating lamp neon/LED type (Red, Yellow & Blue) with lamp holders - 03 Nos. (d) Panel instrumental wiring with FRLS suitable size but not less than 2.5 Sqmm copper wire single core - 01 Job. INCOMING (a) MCCB 4 Pole, Ics = 100% Icu, 36 KA, 415 Volts, 63 Amps, with adjustable thermal and fixed magnetic setting - 01 No, Havells Cat No IHA13EBF0063 or equivalent as specified in list of makes. OUTGOING (a) MCCB 4 Pole, Ics = 100% Icu, 36 KA, 415 Volts, 40 Amps Thermal magnetic release-02 Nos with adjustable short circuit settings class -ll front face, isolation with positive break indication with double break contacts, extended rotary handle spreaders, phase separator conforming to IEC 60947-02 MPCB of suitable capacity Nos. Make : L&T, Legrand, schenider or equivalent. (b) Fully automatic star delta starter (ASD) suitable for 25 HP, 3 Phase, 415 Volts, IP-54, extended wide bend coil, FRLS internal wiring etc. Havells cat No- IHHASDVB* or equivalent as specified in list of makes. BI01010001010000000000000515BI0100001185

Supply, Installation , testing and commissioning of indoor type weather proof, cubical type panel board totally enclosed with outer sheet shall be maid of 3.15mm thick and inner shell 2.0mm sheet CRCA sheet mounted on 60 cm long legs made out of 50x50x6 mm equal angle, embedded in PCC M-15, type B-1, front and back openable, double door openable up to minimum 150 degree, lockable/openable by keys from both sides having chromium plated locks, louvers and air vent gaskets for natural air flow suitable foamed in PU gasket to make it dust/vermin proof, powder coated and prewired as per standard engineering practice, and suitable to cable glands for cable entry and the panel shall accommodate the following equipments. The panel must be designed, and verified IS/IEC 61439-01 and 02 with complete test type certificate for conformance to, complete all as specified and directed by Engr-in-Charge :- Make of LT panel- Shcneider/Legrand/L&T or equivalent. (a) Aluminium bus bar of capacity duly covered with colour coded shrinkable sleeves not less than 200 Amps for phases and neutral - 01 set. (b) Digital multifunction meter of size 96x96mm to measure current, voltage, freequency and power factor with built in selector switch and programmable CT of appropriate ratio - 01 Nos. (c) Panel indicating lamp neon/LED type (Red, Yellow & Blue) with lamp holders - 03 Nos. (d) Panel instrumental wiring with FRLS suitable size but not less than 2.5 Sqmm copper wire single core - 01 Job. BI01010001010000000000000515BI0100001186 Each 0.0000 Excess(+) Full Conversion INR

INCOMING (a) MCCB 4 Pole, Ics = 100% Icu, 36 KA, 415 Volts, 63 Amps, with adjustable thermal and fixed magnetic setting - 01 No, Havells Cat No IHA13EBF0063 or equivalent make as specified in list of makes. OUTGOING (a) MCCB 4 Pole, Ics = 100% Icu, 36 KA, 415 Volts, 40 Amps Thermal magnetic release -02 Nos with adjustable short circuit settings class -II front face, isolation with positive break indication with double break contacts, extended rotary handle spreaders, phase separator conforming to IEC 60947-02 MPCB of suitable capacity Nos. Make : L&T, Legrand, schenider or equivalent (b) Fully automatic star delta starter (ASD) suitable for 10 HP, 3 Phase, 415 Volts, IP-54, extended wide bend coil, FRLS internal wiring etc. Havells cat No- IHHASDRA* or equivelant make as specified in list of makes. (c) Fully automatic star delta starter (ASD) suitable for 15 HP, 3 Phase, 415 Volts, IP-54, extended wide bend coil, FRLS internal wiring etc. Havells cat No- IHHASDTB* or equivelant make as specified in list of makes. BI01010001010000000000000515BI0100001187

S&F of Gun-metal, globe or gate valves, 50 mm dia , heavy duty, with iron wheel head, screwed both ends (ISI marked), complete all as specified & directed by Engr-in-Charge. BI01010001010000000000000515BI0100001191 Each 0.0000 Excess(+) Full Conversion INR

Description all as per ser item No 38.00 above here-in-before but upto 40 mm bore. BI01010001010000000000000515BI0100001192 Each 0.0000 Excess(+) Full Conversion INR

Description all as per ser item No 38.00 above here-in-before but upto 25 mm bore. BI01010001010000000000000515BI0100001193 Each 0.0000 Excess(+) Full Conversion INR

S&F in replacement of DOL starter in sheet steel enclosure type for 1 to7.5 HP, complete all as specified and directed by Engr-in-Charge. BI01010001010000000000000515BI0100001194 Each 0.0000 Excess(+) Full Conversion INR

Total in Figures

Quoted Rate in Figures Select

Please Enable Macros to View BoQ information