REPAIR/REPLACEMENT OF ROOF SHEET WITH GALVALUME SHEET FALSE CEILING FLOORING AND CONNECTED ITEMS AND OTHER MISC MAINT TO CERTAIN OTM ACCN AT MIL STN KALUCHAK

Amount

Dismantling of asbestos cement/CGI/PGI (corrugated, semi corrugated,etc.) sheets in roof coverings complete all as specified and directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified and directed.

Taking down cement or cement lime plaster from brick or stone walls etc. including raking out joints, hacking for keys, scrubbing down with water etc. complete all as specified and directed.

M & L for Glazed ceramic coloured tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick ,on ventical surface as in skriting , dado set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in cement mortar (1:4) complete all as specified and directed.

M & L Non - skid joint free ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including taking down and fixing the shutter at the same place complete all as specified and directed.

M & L Non - skid joint free ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including taking down and fixing the shutter at the same place complete all as specified and directed.

S & F for Vitrified light shade Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm but not exceeding 0.42sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

S & F for Vitrified light shade Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm sqm but not exceeding 0.42sqm, as on vertical surface of wall such as skirting, dado, riser etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match including taking down and fixing the shutter at the same place complete complete all as specified and directed. .

M & L for 20 mm thick polished granite (of any type) tiles, work (table rubbed and polished) bedded and jointed in neat cement slurry and pointed with white cement with admixture of pigment to match the shade of the granite stone including necessary cutting, grinding, rubbing, polishing rounding to exposed edges and laid complete all as specified and directed.

M & L for 15 mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finishes finished even and rough complete all as specified and directed.

Demolition of brick work or stone / boulder masonry including all quoins, arches, pillars, etc. built in cement mortar or cement lime mortar complete all as specified and directed.

M & L for brick work with sub class ‘B’ old size bricks straight or curved on plan exc. 6.00 m mean radius built in cement mortar 1:6 complete all as specified and directed.

M & L for brick work with sub class ‘B’ old size bricks (EXCEPT BRICKS) straight or curved on plan exc. 6.00 m mean radius built in cement mortar 1:6 complete all as specified and directed. NOTE: - OLD BRICKS OBTAINED FROM DEMOLITION UNDER ITEM 12 ABOVE SHALL BE USED UNDER THIS ITEM.

M & L for 15 mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar 1:4 with water proofing compound finished even and smooth (without using extra cement)complete all as specified and directed.

M & L for 15 mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar 1:6 with water proofing compound finished even and smooth (without using extra cement)complete all as specified and directed.

M & L for preparation of newly plastered or un-plastered surfaces of ceiling and applying two coats of cement base paint over one coat of cement primer complete all as specified and directed.

M & L for preparing newly plastered or previously untreated wall surfaces and applying two coat of oil bound distemper over a coat of chalk whitening complete all as specified and directed.

S & F of Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed. NOTE:- Corrugated shape of sheet shall be approved by GE

S & F of Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in ridges, valley, gutters drip and straight flashings fixed with self tapping screws as specified complete all as specified and directed.

S&F for suspended false ceiling system using 4mm thick high pressure steam cured fibre cement pre-primed textured varient E-board (classic), ISI marked, conforming to IS:14982-2000 over and including GI snap grid frame work for false ceiling, grid size 605 x 605 mm with GI angle of size 24x24mm, main runner ‘T’ of size 24x38mm, secondary runner ‘T’ of size 24x28mm with 6mm GI wire with butterfly clips as hangers for leveling, fastners, supports, plugs to walls/joists etc , hangers to be fixed with approved rawl plug, level adjusters and screwsa etc, last hanger at the end of each runner shall not be greater than 450mm from adjacent wall all as per manufacturer’s Instructions including making holes, cutting chasis and making good existing walls in cement mortar 1:3 or PCC 1:2:4 type B1, complete all as specified and directed. Note :- All steel members shall be hot dipped galvanised with zinc coating not less than 120 gm/sqm.

S & F of 6 mm thick asbestos cement corrugated or semi-corrugated sheets fixed with ‘L’ type or ‘J’ type or cranked hook bolts and washers as in roof covering, walls etc. complete all as specified and directed.

S & F Asbestos cement twopiece adjustable serrated ridge for corugated, semi corrugated sheets 6mm thick fixed with ‘L’ type or ‘J’ type or cranked hook bolts complete all as specified and directed.

S & F in repair vitreous china wash down water closet pan (Pedestal pattern) and trap (excluding) fixing bolts,flushing cistern and flush pipe including connection to drain (or outgoing pipe) including plastic seat cover suitable for water closet pedestal pan, coloured closed pattern with flat bottom and cover and mid steel chromium plated or aluminium hinges devices with and including brass chromium plated standard quality jet with nozzle 1500 mm long PVC pipe etc including making connections to trap and flush pipe and making good to floors complete all as specified and directed complete all as specified and directed.

S & F of vitreous china, wash hand basin, flat back, white of size 550mmx400mm including brackets, brass CP waste coupling 32mm dia with long screwed shank and fly nuts, chain and plug, porcelain stopper including cutting for and pinning in ends of brackets or erecting stand, fixed in repairs, complete all as specified & directed

S & F in repair polymer white (polypropylene Delrin and ABS) low level flushing cistern 10 litre capacity valve less, syphonic action type, complete with inlet, ball valve, float valve, bends, brackets, flush pipe, brass screws, handle etc complete having BIS description mark with IS: 7231 with and including 32 mm bore PVC flush pipe of suitable length complete all as specified and directed.

S & F in repairs water closet vitreous china squatting pan ‘Orrisa’ pattern size 580 X 440 mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and flushing pipe, anti-syphonic pipe etc. with and including setting the trap and pan in lime concrete bedding (one lime, two sand or surkhi and 5 aggregate) minimum 150 mm thick alround and finished just below level of rim of pan to receive the floor finishes complete including making good floor complete all as specified and directed.

S & F in repairs 600 mm long PVC connection with two Nos. PTMT nuts internally threaded and PVC washer suitable for 15 mm bore pipe line complete all as specified and directed.

M & L for providing plain cement concrete type B-1, 1:2:4, (using 20 mm graded stone aggregate), as in lintels up to 105 metre clear span , cills, steps , seismic and other simillar bands, plinth course, coping and the likebenching,water throughts etc and the like including weathering, slightly rounded or chamfered angles & throating as directed including necessary form work as required complete all as specified and directed.

Providing and laying 60 mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed.

Dismantling of timber scantling 40 Sqcm and over in section, in any position as in unframed or framed work complete all as specified and directed.

Dismantling of structural steel work including doors, gates but excluding framed trusses complete all as specified and directed.

S & F of steel work as in tubular posts or rectangular hollow section including special shaped washers etc. complete using ERW or induction butt welded tubes conforming to IS – 1161-1979 grade ST-240 complete all as specified and directed.

S & F of rolled mild steel sections as in roof trusses (framed), trussed, purlins, crane gantry, rails, fastening, heavy bracket framing (Beam, tee, angle, channel or flat section), including distance pieces, cleats etc. confirming to Fe 410 -W(Gde-E- 250) quality-A including cutting, welding etc. complete all as specified and directed.

S & F of mild steel framed work such as gate grills, gratings etc. with ends of bars shouldered and / or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing, frame work of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

S & F of hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and coutersunk for balusters running bars for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notcjong for wire, flat iron fillets( for securing wire mesh etc.) including all necessary drilling, bolting or riveting etc and similar cork confirming to Fe 290 -W(Gde-E- 165) quality-A including cutting, welding etc. complete all as specified and directed.

Demolition of cement concrete (unreinforced)of any description and in ground floors and pavings not exceeding 15 cm thick (below or above ground level) complete all as specified and directed.

M &L for Dura stone external designer floor tiles,any colour, shape and size, not less than of size 300mmx300mmx9-10mm thick M-25 grade set and jointed in near cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed.

M & L for25 mm thick cement concrete type B-0, 1:2:4 (using 12.50 mm graded stone aggregate) as in levelling course of floor finishes, finished even and rough complete all as specified and directed.

M & L for 75 mm thick PCC 1:3:6, nominal mix, type C2, using 40mm graded crushed stone aggregate as in sub base of floor, hard standing, path, pavings etc, surface finished even and smooth without using extra cement, laid in alternate bays, complete all as specified & directed..

KAMAL CONSTRUCTION (BID ID -3335737)

M/S KAILASH TRADERS (BID ID -3333733)

M/S TRADE INDIA (BID ID -3336777)

M/s Anand Prakash (BID ID -3336345)

GENESIS INDIA (BID ID -3336934)

M/S RAVINDER SINGH (BID ID -3336876)

M/S VED PAUL MAHAJAN (BID ID -3327530)

M/S Sukhmani Construction Co. (BID ID -3332595)

bamral builder (BID ID -3334716)