Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹3.4 Craccepted-aoc | ₹3.4 Cr | accepted-aoc |
Tender Value
₹3.0 Cr
EMD Value
₹4.5 L
Closing Date
21 Jul 2026, 10:00 pmClosed
Rural Development and Panchayat Raj Department
Arpitha
Improvements Of Road from Muguru Adibettahalli Road to Via Muguru Mole Village, Hosahalli Village to Via Hosahallli Mole Village and Konagahalli to Chitagayyanakoppalu S-3 Joining Road in T.Narasipura Taluk in Mysore District.
RDPR/2025-26/RD/WORK_INDENT25545
RDPR/2025-26/RD/WORK_INDENT25545
Open
Roads
Two Tender Document System(Two Cover)
RDPR Division Office Mysuru
7 documents required · 7 mandatory
Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs)
Executed in any one year the following minimum quantities of work (Cement Concrete - xxxx cum, Earthwork - xxxx cum, etc) (80% of peak rate of construction)
Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx)
Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3 months of peak construction period)
Total value of civl engineering works executed and payments received in the last five years (year-wise)
List of existing commitments and ongoing works
List of works for which tenders already submitted
Banker Details for reference
Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded
Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years
Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded
List of Financial Resources with Certificates
Satisfactoriy completed (atleast 50%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (50% of estimated cost of tender)
The Contractor should have satisfactorily completed as prime contractor, atleast one similar work such as Asphalt Road of value not less than Rs.151.42 lakhs Excluding GST in any one of the Last Five Financial Years 2021-22, 2022-23, 2023-24, 2024-25, 2025-26 and workdone certificate should be Obtained from Competent Authority not below the rank of Executive Engineer or District Level Officer. Certificate should be in the prescribed form as in section 3:1.3 of KW4 Along with Work Indent Number
The Work done Certificate in respect of quantity executed in any one of last five financial year that is 2021-22 to 2025-26 for a continuous period of 12 months the minimum quantities of annual requirement for the works as per clause 3.2 c Certificate should be in the prescribed form as in section3:1.4. of KW4 1.PCC/ RCC-246.00 CUM 2.TMT STEEL - 6.72 MT 3. GSB - 2711.00 CUM 4.Earthwork Excavation/ EMBANKMENT / Subgrade / Shoulder - 3754.00 CUM 5.WMM/WBM - 2420.00 CUM 6.Asphalting - 20682.00 Sqm and Should be obtained from not below the rank of Executive Engineer or District Level officer
Information on works for which Tenders have been submitted and works which are yet to be completed as on the date of this tender as in K/W-4 (section 3: 1.5) A)Existing commitments and on-going works. B)Works for which Tenders already submitted.
Valid KPWD Registration Certificate of Class II and Above
LOC not less than Rs.100.94 lakhs with Indent Number from Nationalized/ Scheduled banks.
Each Tenderer should further demonstrate (A) availability by owning at least 50 percent of the required / specified key and critical equipment for this work and remaining 50 percent can be deployed on Own/ lease / hire basis for all works provided, the relevant documents (commitment agreements etc.,) for availablity for this work are furnished (i) Machineries / equipments to be owned a)Hydraulic Excavator like JCB/HITACHI etc.,-01 No, b) Static Road Roller-01 No, c) Vibratory Road Roller-01 No, d)Tipper-02 Nos e) Water Tanker-02 Nos f) Concrete Mixer - 2 Nos (ii)Machineries / equipments could be on lease/Hire/Own a) Hydraulic Excavator like JCB/HITACHI etc.,-01 No, b) Static Road Roller-01 No, c) Vibratory Road Roller-01 No, d) Tipper - 2 Nos, e) Water Tanker-02 Nos, f) Concrete Mixer - 01 No, g) Motor Grader -01 No, h) Mechanical Paver Finisher - 01 No, i) Hot Mix Plant 40/60 TPH -01 No.
The tenderer must have achieved in at least two financial years in the last five financial years 2021-22 to 2025-26 Annual financial turnover of Rs.605.68 Lakhs. Certificate should be in the prescribed form as in section 3: 1.2 of K/W-4 (TURNOVER CERTIFICATE CERTIFIED BY CHARTERED ACCOUNTANT With UDIN AND ALSO ALONG WITH PROFIT AND LOSS STATEMENT WITH IT RETURN FILES
Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
₹5,000
₹4.5 L
21 Jul 2026
1 Jul 2026
22 Jul 2026
20 Jul 2026
6 Jul 2026
Improvements Of Road from Muguru Adibettahalli Road to Via Muguru Mole Village, Hosahalli Village to Via Hosahallli Mole Village and Konagahalli to Chitagayyanakoppalu S-3 Joining Road in T.Narasipura Taluk in Mysore District.
For Drain and Deck Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils, as...
For Drain and Deck Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates...
For Drain Raft, deck Slab Raft and Deck Side Walls Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & ...
For Drain Sidewalls Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m...
For Drain and Deck Steel Fabrication Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending,...
For Asphalt Road Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal ...
Scarifying the existing bituminous road surface to a depth of 50 mm and disposal of scarified material by Mechanical Means using Hydraulic excavator with in all lifts and lead (PWD CSR Vol-3 of 2023-...
Construction of unlined surface drains of average crosssectional area 0.40 m2 in soil to specified lines, grades, levels and dimensions. Excavated material to be used in embankment with a lift upto 3m...
Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with water at OMC and then compacte...
Construction of Embankment with approved materials deposited at site from Roadway cutting and excavation from drain and foundation of other structures graded with desired compaction. (Royalty Shall b...
Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading,...
By Mix in Place Method Construction of Granular Sub-Base of required grading as per design spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with front en...
Wet Mix Macadam (Plant mix method) Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical ...
Prime Coat over WMM/WBM Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0....
Providing and applying tack coat with RS1 Bituminous Emulsion using emulsion pressure distributor at the rate of 0.25 kg/m2 on Granular Surface [CSR 2023-24 Vol 3 P.No 31 S.No. 5.4 ]
Providing and laying Bituminous Macadam with 40/60 tph capacity hot mix plant using crushed aggregates of specified grading premixed with bituminous binder VG-30 @ 3.3% by weight of mix, transported t...
Providing, laying and rolling of close-graded premix surfacing material of 20 mm thickness composed of 11.2 mm to 0.09 mm (Type-A) or 13.2 mm to 0.09 mm (Type-B) aggregates using VG 30 bitumen to requ...
Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to mee...
Providing and erecting direction and place identification retro reflectorised sign as per IRC:67:2022 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick...
Retro-Reflectorised Traffic Signs, Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC:67:2022 made of Class B Type IV retro reflective sheeting fixed ov...
Reinforced cement concrete M15grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc, 200 m stone (precast), MoRT&H :IRC 805.(PWD CSR Vol-3 ...
Providing and erecting a "W" metal beam crash barrier system comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC series channel vertical post, 150 x...
Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20m x 0.90m size mad...
Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectoris...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
25545 Bid Document AVC Final.doc
Tender Document • 2.01 MB
LOC FORMAT ADN.pdf
Instructions to Tenderers • 0.08 MB
Notification 03 AVC.pdf
Instructions to Tenderers • 2.97 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .