Special repair renovation of labour Room in B.K Hospital NIT Faridabad REINVITED

Amount

Scraping white wash and colour wash [HSR 8.32a]

Scraping of cement plaster [ HSR 8.32( c ) ]

P.V.C sheet flexible type conforming to I.S 3462-1966 flooring plain coloured marble or mottled finish on a smooth damp proof base laid with adhesive recommended by manufacturer including pressing the sheet with a suitable tool to get a smooth surface all complete as directed by the Engineer-in-Charge- 4.00 mm thick [HSR 14.76 (e)]

Providing & Fixing 1st Quality ceramic glazed wall tiles conforming to IS. 15622 (thickness to be specified by the manufacturer) of approved make in all colours, shades except burgundy bottle green, black of any size as approved by Engineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 coarse and jointed with grey cement slurry including ointing in white cement mixed with pigment of matching shades complete. (b) size of ceramic glazed tiles 300 x 450 mm of reputed manufacturer like:- RAK, N"ITCO, Kajaria, SIMPOLO & ORIENT BELL shall be used as approved by Engineer-in-charge (HSR 14.92) (b) Note:- The Agency to whom the work is allotted will have to produce original bill/voucher for all quantity in token of proof of purchase of material.

Preparation of ply wood surface for painting including sand paparing the surface and applying filling with approved quality filler consisting of with lead, linseed oil, varnish and chalk miti including finishing the surface to required finish complete. Painting on wooden surfaces etc. (HSR 16.1)

Providing & Applying pink primer or aluminium priming coat on wood work including preparation of surface knotting and stopping etc. (Note:- First quality paint/primer of reputed make firm such as Goodlass-Nerolac, Berger, Garware, Jenson, Nicholson, Asian & Shalimar Shall be used as approved by Engineer-in-charge in writing, drum of paint shall be opened in presence of Engineer-in-charge) (HSR 16.2)

Providing & applying Painting two coats excluding priming coat with synthetic enamel paint in all shades on new wood work or metallic or plastered or concrete surfaces to give an even shade. (Note:- First quality paint of reputed make firm such as goodlass- Neolac, Berger, Garware, Jenson, Nicholson, Asian & shalimar shall be used as approved by Engineer-in-charge in writing, drum of paint shall be opened in presence of Engineer-in-charge. (HSR 16.3)

Painting two coats with plastic emulsion paint on walls on new work to give an even shade. (Note:- First quality paint of reuted make firm such as Goodlass-Nerolac, Berger, Garware, Jenson, Nicholson, Asian & Shalimar Shall be used as approved by Engineer-in-charge in writing, drum of paint shall be opened in presence of Engineer-in-charge) [HSR 16.30]

Distempering with washable oil bound distemper (of approved manufacture) two coats on old distempered work. (Note:- First quality paint of reputed make firm such as goodlass-Nerolac, Berger, Garware, Jenson, Nicholson, Asian & Shalimar shall be used as approved by Engineer-in-charge in writing, drum of paint shall be opened in presence of Engineer-in-charge [HSR 16.60].

Providing and Applying two coats white cement based putty over plastered surface and grinding the surface smooth with sand paper to get an even and smooth finish including cost and carriage of all material, labour charges, scaffolding, sundries etc. complete (J.K. / Birla make) [HSR 16.81].

Commercial hard wood such as hillock, champ, chikrassy and chaplash etc. (Non coniferous timber other than teak conforming to I.S specification no. 1003 kiln seasoned) wrought, planed and fixed in position . [HSR 17.8]

Providing and fixing plywood, plain lining butt-jointed , including wooden plugs (Teak, placed at 45 cm to 60 cm centres, complete with necessary nails (Frame work shall be payable extra)- 6 mm thick 3 ply commercial ply wood with teak faced on one side [HSR 17.47 (f)]

Providing and fixing commercial type block Board, plain lining, butt jointed, including Wooden plugs (teak) placed at 45 cm to 60 cm centres, complete with necessary nails (frame work shall be payable extra) [HSR 17.49] (i) 25mm thick

19 mm thick

Factory manufactured solid flush door shutters with block board core as per I.S no. 1659-1669 bonded with water proof type phenol formaldehyde synthetic resin, hot-pressed, conforming to I.S 2202 part-I anf II fixed in position, including iron hinges, screws, chocks/cleats, and stops etc. (Excluding the cost of any fittings, other than specified above, but including labour for fixing the same in position) -(Note) : - Commercial veneering with vertical grains or cross bands and face veneer on both sides commercial facing with laminatyed core and lipped edges. (Duro, green) 35 mm thick (HSR 17.93) (a) (iii))-Note I under 17.18.

Providing and fixing Aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z. sections and other sections of approved make conforming to IS;733 and IS;1285 fixed with raw plugs and screws or with fixing clips or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom, and sides with required neoprene felt etc. aluminum sections shall be smooth, rust free straight mitered and jointed mechanically wherever required including cleat angle, aluminum snap beading for glazing/paneling C.P brass/stainless steel screws. All complete. Fixed portion (Anodized Aluminum transparent or dyed to required shade according shade according to IS;1868, minimum anodic coating of grade AC 15). Add Rs. 15/- Per kg. extra if powder coating of 50 micron is done instead of anodizing [HSR 17.95 + Note (i)

Providing and fixing aluminum work for doors, windows, ventilators and portions with excluded built up standard tubular sections/appropriate Z sections and other sections of approved made conforming to IS;733 and IS;1285 fixed with rowel plugs and screws or with filing clips or with expansion hold fasteners including necessary filling up of gaps at junctions hold fasteners, at top, button and sides with required neoprene felt etc. aluminum sections shall be smooth, rust free straight mitered and jointed mechanically wherever required including clear angle, aluminum snap beading for glazing/paneling C.P. brass/stainless steel screws, etc. complete shutters of doors, windows & ventilators including providing and fixing hinges/pivots and making provision for fixing of fittings wherever required including the cost of PVC/neoprene gasket required including Aluminum fitting (HSR 17.96 + Note (i)

Providing and fixing glazing in aluminum door, windows, ventilator shutter and partitions etc. with pvc/neoprene gasket etc. complete (cost of aluminum snap beading shall be paid in the basis items) – (b) with float glass panes of 5.00 mm thickness [HSR 17.98(b)].

Wire gauze of 140 G or 120 G designation fixed on steel windows of standard rolled steel section, with 3 mm thick flat iron cover moulding of 12/5 mm width, fixed with machine, screws welded complete in all respects [HSR 18.32]

Pressed steel sheet frames (Chowkhats) consisting of 2 mm thick steel sheet of the specified section including ironlugs (hold fasts) iron hinges, conforming to PWD specifications, including bolts for fixing stops, locknotch, provision for receiving tower bolts and finished with one coat of ready mixed paint red lead non-setting primer of approved quality fixed in position including the cost of cement concrete 1:3:6 for filling in the frame and cement concrete 1:3:6 for lugs complete. (a) Door and window frame of size 89 mm x 50 mm with 40 mm wide single rebate. (b) Door and window frame of size 76 mm x 38 mm with 35 mm wide single rebate [HSR 18.34 (b)].

Supplying and installation of Hospital Track (13 Rft with one bend and two support) Make- VISTA complete as per direction of Engineer-in-charge of work (NS).

Providing & fixing Frosted glass film Make- Garware complete as per direction of Engineer-in-charge of work (NS) .

Providing & fixing PVC rainwater pipe 6 kg. pressure of ISI mark in cement mortar during masonary work (a) 100 mm dia PVC pipe 6 kg pressure (Note:- Reputed make PVC pipe such as Supreme, Finolex, Prince will be used as approved by Engineer-in-charge (HSR. 13.89) (a). Note:- The Agency to whom the work is alloted will have to produce original bill/voucher for all quantity in token of proof of purchase of material

Providing and fixing PVC bend ISI mark (a) 100 mm dia PVC bend (Note:- Reputed make PVC bend such as Supreme, Finolex, prince will be used as approved by Engineer-in-charge. (HSR 13.90)(a) Note The Agency to whom the work ia alloted will have to produce original bill/voucher for all quantity in token of proof of purchase of material.

Providing and fixing in position best quality Stainless Steel Sinks with Complete fittings as fully described in item No. 30.51. (a) 600 mm x 450 mm x 200 mm. (HSR 30.53 (a)).

Providing and fixing in position best Indian make flexible tube connection. (b) C.P. Brass (iii) 15mm x 450 mm. (HSR 30.82 (b) (iii)).

PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE (ORDINARY) LAVATORY SUITES consisting of Lavatory in VITREOUS CHINAWARE size as give below ( to the approval of the Engineerin- charge) including china plug for tap hole where necessary ; R.S. or C.I.BRACKETS for building into wall including painting; 32mm C.P.BRASS WASTE WITH C.P. brass chain and rubber plug; 15mm C.P.BRASS SCREW DOWN PILLAR TAP WITH jam nuts or couplings best design (as approved by the Engineer-in-charge) ALL FITTINGS BEST INDIAN MAKE and; to the approval of the Engineer-in-charge. ALL brass work chromium plated and COMPLETE in all respects INCLUDING cutting and MAKING GOOD THE WALLS, FLOORS AND PAINTING OF FITTINGS ETC.- Size 550 mm x 400 mm with one no. tap (HSR 30.41 (iv)

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete- 32 mm dia [DSR 17.28.2.1].

Providing and fixing in position best Indian make bevelled edge 5.5 mm thick mirror mounted on asbestos sheet ground fixed in position by means of 4 nos. chromium plated brass screws and washers over rubber washers and rawl plug embeded in the wall or chromium plated brass clamps with C.P. brass screws (as required by the Engineer -in -charge) complete including cutting and making good the walls etc. HSR 30.71 (a) Indian make (I) 600mmx450mm

PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE PAPER HOLDERS FIXED INTO wall with C.P Brass screws complete in all respects INCLUDING CUTTING AND MAKING GOOD THE WALLS ETC.- C.P. Brass [HSR 30.67 (a)]

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge [HSR 18.7] (i) 20 mmm nominal outer dia pipes

25 mm nominal outer dia pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain &brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. [DSR 18.8] (i) 15 mm nominal outer dia pipes

20 mm nominal outer dia pipes

Providing & fixing in position 15mm i/d C.P. brass bib cocks of best quailty (as required by the Engineer-in-charge) (HSR 30.75) a) Bib cock long body.

Providing & fixing in position 15mm i/d C.P. brass bib cocks of best quailty (as required by the Engineer-in-charge) (HSR 30.75) C) Bib cock short body

Providing and fixing position best Indian make C.P brass stop cock (as approved by the Engineer-in-charge) (HSR 30.76 a) ii) 15mm concealed stop cock with flkange

Providing and fixing in position best Indian make C.P brass basin mixer complete instead of one no pillar tap [HSR 30.46 (A)]