REPAIRS TO COMPOUND WALL, FENCING, RCC JALLI PERIMETER WALL ALUMINIUM JOINERY ROOFING FALSE CEILING ETC IN MADAMBAKKAM NARENDRA PLACE AND 9 P AND S UNIT AT AF STATION TAMBARAM

Amount

Demolition of brickwork,PCC or stone / boulder masonry in floor or wall built in cement mortar complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5cu m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in hard/dense soil complete all as specified and directed.

M&L PCC (1:4:8) type D2 using 40mm graded stone aggregates as in foundation, filling and mass concrete complete all as specified and directed.

Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness below or above ground level complete all as specified and as directed .

M&L for 25 mm thick cement concrete couloured chequered tiles (Square or rectangular) area of each tiles exc 0.08 sqm but n exc 0.16 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match the tiles laid over including 15 mm thick screed bed or bedding layer of cement mortar (1:4) incl dismantling old any type of floor tile incl cement mortar bedding and removal of rebris out of premises complete all as specified and as directed.

M & L Precast coloured interlocking paver blocks factory made confirming to IS-15658-2006 of 60mm thick grade of concrete M-35 with cement and coloured pigment complete all as spd & directed .

M & L Precast interlocking paver blocks factory made confirming to IS-15658-2006 of 60mm thick grade of concrete M-35 with gey cement cement and no pigment complete all as spd & directed .

M&L Sand cushioning under floors or below the interlocking tiles including watering and consolidation complete all as specified and as directed.

M&L for 75 mm thick cement concrete 1:3:6 (40mm graded stone aggregate) as in plinth protcetion/path/hard standing and courtyard, finished cement surfaces even and smooth complete all as specified and as directed.

M&L for broken stone/boulders in hardcore gauge n exc 63 mm , deposited, spread and levelled in layers n exc.15 cm thick watered and rammed to a true surface complete all as specified and directed.

M&L Cement Concrete 1:2:4 type B-1 (using 20mm graded aggregate) as in surface channel, all as specified and as directed

M&L for 100mm thick PCC 1:3:6, type C2 as in path way using 40mm graded stone aggregate complete all as specified and directed.

M&L for flyash brick work with sub class B bricks straight or curved on plan exc 6m mean radius built in CM 1:4

M&L Precast Cement concrete 1:2:4 type B-1, using 20 mm graded agg solid block masonary exc 10 cm thick setting in CM 1:4 complete complete all as specified and directed.

M&L for Brick work with old servicable bricks received from dismantling straight or curved on plan exceeding 6 m mean radius and built in cement mortar 1:4 complete all as speecified and directed

M&L for rendering on fair faces on wall surfaces 15 mm thick in cement mortar 1:4 mixed with water proofing compound at the rate of 2% by weight of cement on roof surfaces, finished fair and even without using extra cement complete all as specified and directed. NOTE : Water proofing compound shall be measured and paid separately complete all as specified and directed.

Supply only integral water proofing compound complete all as specified and directed.

M&L Precast RCC Jallies 35 mm thick incl all mouldings, type B-0, 1:2:4 using 12.5mm size aggregate set in CM 1:4 complete all as specified and directed.

M&L for preparation of newly plastered wall surfaces and applying two coats of cement based paint complete all as specified and directed.

M&L PCC 1:3:6 type C2 (using 20 mm graded agg) as in coping complete all as specified and as directed

M&L for preparation of old wall surfaces and applying one coat of exterior emulsion paint complete all as specified and directed.

M&L for preparation of old wall surfaces and applying one coat of cement base paint complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for and complete all as specified and directed.

Dismantling fencing wire mesh, any type and complete all as specified and directed.

S&F for Joist, channel, angle,MS Flat or tee sections, fixed independently, without connecting plates, etc. cut to ordinary lengths as in fencing posts complete etc as in chain link fencing posts and struts including cutting tops to shape as directed, drilling holes, notching for wire, etc for securing wire mesh etc, and similar work conforming to Fe-290 Gde E-165 all as specified and as directed

S/F mild steel screw bolts (machine made), diameter of shank 11 to 15 mm, with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt n exc 15 mm long complete all as specified and directed.

S&F for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooksand hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed

S/F in repair galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacings andstraining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc, as directed (each line wire to be measured) complete all as specified and directed.

Restraining, resecuring including making good galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacings andstraining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc, as directed (each line wire to be measured) complete all as specified and directed.

M&L for Welding in repairs exc 6mm and n.exc 9mm in thickness and n. exc 2.5cm in length complete fixed in position all as specified and directed.

M&L for Welding in repairs exc 6mm and n.exc 9mm in thickness exc 2.5cm n.exc 5cm in length complete fixed in position all as specified and directed.

S& F for Welded steel wire fabric not exc 4.0 kg complete fixed in position all as specified and directed.

S&F Mild steel hold fast made of flat iron conforming to 410-0 or Fe-310-0 compelete all as specified

M&L PCC 1:3:6 type C1 (using 20 mm graded agg) as in coping , PCC block for fixing of hold fast, sanitary fittings etc., complete all as specified and directed

Cutting holes into or through brick walls/ pillar built in mud mortar for hold fast, size 150x100x100 mm complete all as specified and directed.

M&L preparation of new steel surfaces of any description, over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L preparation of old steel surfaces of any description, over 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed

S&F in repairs of 600mm dia concertina coil fixed to the existing mild steel post over the boundray wall of height 3m complete all as specified and directed.

S&F Chain link MS galvanisd fencing, any size or types all as specified and as directed

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire all as specified and as directed

Supply only 10 mm dia mild steel round bars as in stiffener to chain link fencing including necessary cutting bedding etc. conforming to Grade-I, IS 432-2000 (Part-I) complete all as specified and as directed.

Writing letters or figures (Block. Roman, Italic or Indian) n exc. 30 cm high complete all as specified and directed

Taking down (Steel/ Wooden) frame any description exc. 1.5 sqm but n.exc 4 Sqm each (with out taking off shutter from the frame) incl hardware fittings complete all as specified and directed.

All as per item 44 but n exc. 1.5 sqm each with shutters and hardware fittings

S&F extruded aluminum alloy handles of size 150mm fabricated type anodised complete all as specified and directed.

S&F Aluminium alloy anodised barrel tower bolts of extruded section 150 mm long and fixed complete all as specified and directed.

Supply and fix anodised aluminium grills (Pattern DG-102 with weight, not less than 3.131 Kg/sqm) for windows, ventilators, etc., including joining cleats etc., complete all as specified and directed.

S & F powder coated (50 micron) aluminium frame for doors, windows, ventilators with one or more rebates including joining cleats for fixing etc. complete all as specified

S&F Anodised aluminium powder coated door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed.

S & F powder coated (50 micron) aluminium window and ventilator shutter, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing cleats, glazing clips, rubber packing, anodised aluminium snap beading, screw, anodised aluminium fittings such as I-Max hinges 02 Nos, suitable handle (1 no.), including fixing of SS wirecloth with necessary fixing arrangements (SS wire cloth is measured and paid seperately) complete all as specified

S & F powder coated (50 micron) Anodised aluminium window and ventilator shutters, sliding type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified, including fixing of SS wirecloth with necessary fixing arrangements (SS wire cloth is measured and paid seperately) complete all as specified and directed.

S&F in repair Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions complete all as specified and directed.

S & F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.10mm and fixed with stainless steel wire staples, including fixing in Aluminium side hund window shutters complete all as specified and directed.

S & F sheet glass of ordinary quality 4 mm thick and glazing complete with beads fixed with screws in aluminium shutter square exc 0.5sqm in each pane complete all as specified and directed.

All as per item No 56 here-in-above but for thickness 5.5 mm

All as per item No 56 here-in-above but for frosted / approved design 5.5 mm

S & F sheet glass of ordinary quality 4 mm thick and glazing complete with beads fixed with screws in aluminium shutter square n. exc 0.5sqm in each pane.

S&F in repair Vertical Blinds winow/Door curtains of approved design and pattern and having glass fibre fabrics in width 5” (or 4”). Minimum overlapping of ¾” in fabric. Top aluminium anodized rail of 1.4 mm thickness,2 inch wide channel with front lamination of same fabric. Runners having stainless steel hooks with built-in shock spring and self aligning slip clutch. End control box composed of double gear system. Stainless steel spacers. Botton weight fully plastic covered linked with plastic bead chain complete all as specified and directed.

S&F in repair pre-laminated 18 mm thick lead free factory made 100% Solid WPC (Wood Polymer composite) sheet having high natural fiber contains 25 to 30 % wood colour sheet with density not less than 600 kg /Cbm bent 90°and the weight of sheet of 1 sqm should be 11 kg(+/- 5%) manu facture by ISO-9001-2015 certified company, the sheet should be 100% termite/water proof, fire rertradent, Eco friendly, and finish at all edges at level for making edges lipping using binding tape etc as in Kitchen cupboard,Cabinet fitted with SS screws etc complete all as specifed and directed.

All as per Srl item No 61 here-in-above but for both side prelam without printed .

S & F continous (piano) hinges mild steel, 40mm width of flaps (when open) , bright finish or electrogalvanised complete all as specifed and directed.

S&F in repair Magnetic catcher as appproved by GE fitted with nuts and bolts complete all as specified and directed.

M&L for Zinc finished telescopic drawer channel 18 inch long, ball bearing slide for kitchen cabinets and wardrobe complete all as specifed and directed

M& L for Auto closing hinges 35 mm of 0 crank (KH-001 or 8 crank (KH-002) openble at 110 degree for kitchen cabinet shutters complete all as specifed and directed

S&F chromium plated SS wire basket (AISI 304 gde ) Non magenatic multilayer feuba nicket chorme plated for multipurpose utensils container with (storage basket) pull out type for utensils size 480x500x150mm of grade 304 with necessary fixing clips etc complete all as specified and directed.

S&F SS wire basket (AISI 304 gde ) Non magenatic multilayer feuba nicket chorme plated for multipurpose utensils container with (cup and saucers basket) storage basket pull out type for utensils size 380x500x100mm of grade 304 with necessary fixing clips etc complete all as specified and directed.

S&F SS wire basket (AISI 304 gde ) Non magenatic multilayer feuba nicket chorme plated for multipurpose utensils container with (Plate Basket) pull out type for utensils size 380x500x100mm of grade 304 with necessary fixing clips etc complete all as specified and directed.

S&F SS wire basket (AISI 304 gde ) Non magenatic multilayer feuba nicket chorme plated for multipurpose utensils container with (cutlery basket) out type for utensils size 380x500x100mm of grade 304 with necessary fixing clips etc complete all as specified and directed.

S&F SS wire basket (AISI 304 gde ) Non magenatic multilayer feuba nicket chorme plated for multipurpose utensils container with (Grain trolly Basket) pull out type for utensils size 380x500x100mm of grade 304 with necessary fixing clips etc complete all as specified and directed.

S&F SS wire basket (AISI 304 gde ) Non magenatic multilayer feuba nicket chorme plated for multipurpose utensils container with (Bottle pulll out basket) out type for utensils size 380x500x100mm of grade 304 with necessary fixing clips etc complete all as specified and directed.

M&L for 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC frame complete all as specified and directed.

S&F for false ceiling of 9mm thick gypsum tiles (600x600mm) laminated with PVC film on the face side & metalised polyester film on the back side with all four edges sealed with PVC film (shade either plain white or crack) fixed using T grid/Cross-T/Wall angle/level clip & suspenders of standard galvanised sections in a grid size of 600x600mm of manufacturer M/s Saint Gobain or equivalent of Armstong/Everest including taking down existing ceiling board & grid work etc of any type/pattern complete all as specified and directed.

M&L for cement plastering 10mm thick in cemet mortar 1:6 on brick work or concrete surfaces finished even and smooth without using extra cement incl taking down existing cement plaster of any description complete all as specified and as directed.

S&F steel work in tubular trusses curved/plain including special shaped washer etc complete using ERW or industion butt welded tubes confirming to IS 1161-1979 grade St-240 complete all as specifed and directed.

S&F mild steel work as in wind ties ,posts and sturts for roof including securing bolts etc similar work confirming to Fe-290 gde E-165 complete all as specifed and directed.

M&L for cement concrete 1:3:6(40mm graded stne aggregate)75 mm thick in plinth protcetion/path/hard standing and courtyard, finished cement surfaces even and smooth complete all as specified and as directed.

S&F painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified etc complete all as specifed and directed.

S&F painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified etc complete all as specifed and directed.

ragavbuilders (BID ID -3135786)

M/s KM Marimuthu Achary (BID ID -3126965)