RMO Composite Testing Laboratory ,Kandaghat Distt. Solan(H.P).( SH- Providing and fixing prepainted sheet.)

Amount

Dismantling roofing including ridges, hips, valleys, gutters etc. Stacking the serviceable material and disposal of unserviceable material within all leads

Demolition of Brick work above G.L. Upto all level i/c stacking of serviceable materials and disposal of unserviceable material within all lead in cement mortar.

Brick work using common clay burnt building bricks in superstructure above ground level in cement mortar 1:6 (1cement: 6 sand) 1st class bricks upto all height.

Steel work welded in built, up section in trusses and framed work including cutting hoisting, fixed in position & applying a priming coat of red lead paint in :- a)In trusses and trussed purlins. For Roof

b) In grating framed guard, bars ladders, railing, brackets and similar works.

Rewelding of existing Steel work in built, up saction in trusses and framed work including cutting hosting fixed in position :- a)In trusses and trussed purlins. For Roof

Providing and fixing 0.60mm thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia mter with prepainted limpet and rubber washers complete with all accessories as required as per the direction of Engineer-in-Charge.

Providing and fixing ridges or hips 60cm over all with 0.60mm thick prepainted steel sheets in roofing with hot dipped metallic zinc coated sheets with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating back coat of polyster of 5 microns over 5 microns primer coat ing including fixing with prepainted iron j or L hooks, bolts & nuts 6mm dia & prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer-in-Charge.

Providing & fixing M.S. BP sheet 1.66mm to 2mm thick in eaves board/ facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-Charge (Base members of steel work shall be measured & paid separately).

Providing and fixing plain asbestos cement sheet ceiling of approved quality with butt jointing wood screws ( frame work and cover fillets to be measured and paid for seperately) 6mm thick

Providing and fixing 15cm wide 45cm over all semicircular plain GI sheet gutter with iron brackets 40x3mm size bolts and nuts and washers making necessary connection with rain water pipe as per design (a) 0.63mm thick sheet

Providing and laying cement concrete 1:3:6 (1cement:3sand:16graded stone agregate 20mm nominal size ) and curring complete excluding cost of form work in foundation and plinth.

15mm cement plaster in single coat on the rough side of brick/concrete/stone walls for interior plastring upto floor two level including arrrises, internal rounded angles, chamfers and/or rounded angle not exceeding 80mm in girth and finished evehn and smooth in cement mortar 1:6(1cement :6sand).

15mm cement plaster in single coat on the fair side of brick/concrete/stone walls for interior plastring upto floor two level including arrrises, internal rounded angles, chamfers and/or rounded angle not exceeding 80mm in girth and finished evehn and smooth in cement mortar 1:6(1cement :6sand).

Painting two coat (excluding priming coat) on new steel and other metal surface under coat with ready mixed paint brushing to give an even shade including cleaning of all dirt, dust and other foresign matter with ready mixed paint otyher than white.

Applying birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final metter finish to the surface complete.

Finishing wall with water proofing cement paint Apex of Asian brand and manufacture and of required shade on decorated wall surfaces (two coats) to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials.

Providing and fixing on wall face PVC (D-plast) rain water pipes for working pressure not less than 4.5kg/sqm i/c filling the joits with the approved adhisives complete of Phinolex/ D-plast a)150mm

P/f P.V.C. Fittings and accessories of Phinolex/ D-plast. a) P/f PVC plain bend ISI marked including fixing with approved adhesives etc. Complete 150mm dia

Providing and fixing PVC clamps ISI marked of approved design with steel screws and raw plugs etc. complete. a)150mm

Neeraj Kumar