CERTAIN REPAIR TO TOILETS, SUNKUN FLOORS, INTERNAL WATER SUPPLY ITEMS AND OTHER B/R WORKS AT AF STN UDHAMPUR

Amount

Taking down cement plaster of any description on brick, concrete or stone walls or ceiling including racking out joints, hacking for key, scrubbing down with water etc and removal of rubbish off, complete all as specified and as directed by Engineer-in-Charge.

M&L for rendering 15mm thick CM 1:6 on fair faces of brickwork or concrete surfaces finished even & smooth w/o using extra cement,complete all as specified and as directed by Engineer-in-Charge.

M&L for Rendering 15mm thick in CM 1:4 on other than fair faces of Brick walls or on concrete surfaces plastered surfaces finished even and smooth without using extra cement, complete all as specified and as directed by Engineer-in-Charge.

M&L Rendering 05mm thick in CM 1:3 in ceiling on fair faces of brick work or concrete surfaces, complete all as specified and as directed by Engineer-in-Charge.

M&L for two coats of Oil Bound Distemper on new plaster surfaces of walls including preparation of surfaces, after filling putty or white cement to holes cracks and uneven surface to make it completely smooth surface, where required, complete all as specified and as directed by Engineer-in-Charge.

M&L for two coats of Cement Base Paint in camouflage pattern on newly plaster sufaces of Walls incl preparation of surfaces after filling putty or white cement to holes, cracks and uneven surface to make it completely smooth surface, where required, complete all as specified and as directed by Engineer-in-Charge.

M&L for two coats of White Wash on newly plaster surfaces of ceiling incl preparation of surfaces, complete all as specified and as directed by Engineer-in-Charge.

Demolition of cement concrete (unreinforced) of of any descriptions, in ground floors (Floor Topping, Sub Base etc) n exc 150mm thick, above or below ground level complete all as specified and as directed by Engineer-in-Charge.

M&L Cement concrete type B-0, 1:2:4 (12.5 mm graded aggregate) 25mm thickness as in floor for laying tiles brushing with neat cement slurry @ 3.00 Kg /Sqm complete all as specified and as directed by Engineer-in-Charge.

Dismantling of floor hearth or wall tiling including cement mortor bedding but not backing complete all as specified and as directed by Engineer-in-Charge.

M&L for Non-skid coloured designer ceramic tiles (Square/rectangular) area of each tile exceeding 0.11 sqm but n exc 0.18 sqm, 7-8mm thick in floors etc set & jointed in neat cement slurry & pointed in white or coloured cement to match including screed bedding layer of 15 mm thick in CM 1:6 , colour and design approved by Engr-in-Charge complete all as specified and as directed by Engineer-in-Charge.

M&L for Glazed coloured ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10mm thk screed bed in CM 1:4 complete all as specified and as directed by Engineer-in-Charge.

M&L Colour Digital Vitrified Tiles 10 mm thick (Square/Rectangular) polished area of each tiles not exc 0.36 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed bedding layer of 15 mm thick in CM 1:4 complete all as specified and as directed by Engineer-in-Charge. colour and design approved by Engr-in-Charge. Make :- Somany, Kajaria, Johnson, Nitco.

All as per item No. 13 above but on vertical surfaces such as dados, skirtings and risers to steps, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:3 on masonry/ concrete surfaces complete all as spfd colour and design approved by Engr-in-Charge. Make:- Somany, Kajaria, Johnson, Nitco.

Taking down shutters of any description from the frames and refixing in the same opening after repair of door rescuring or easing & adjusting etc , area n.exc 2.00 sqm each complete all as specified and as directed by Engineer-in-Charge.

Taking down existing damaged IWC alongwith complete PCC and lime / cement concrete from sunken floor and providing new ''Orissa Pattern" WC and water proofing treatment to sunken floor as per following stage :- (i) 15mm thick plastering in CM (1:2) with WPC all around and base of sunken floor with proper slope. (ii) Applying a coat of 85/25 grade hot bitumen @ 0.70Kg / Sqm over a coat of bituminous primer @ 0.50Kg/Sqm and then pasting of polythene film, 150 micron, natural colour with cold cut back adhessive. (iii)Fixing of 25mm dia GI pipe (medium grade) spout of length 45 cm. (iv)Filling sunken portion with PCC (1:4:8) type D2 using 40 mm graded aggregate after tesing of water tightness.

Demolition of brick work or stone masonry built in cement mortar including all quoines arches,pillar etc but excluding ashlar facing, dressed stone work and precast concrete articles complete all as specified and as directed by Engineer-in-Charge.

Brick work with sub class 'B" old size bricks straight or curved of onplan to any radius in half brick thick walls built in CM 1:4, complete all as specified and as directed by Engineer-in-Charge.

M&L for brick work with sub class 'B' bricks straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6, complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs vitreous china wash down water closet white squatting pan orissa pattern size 580x440mm with integral foot rest incl making necessary connections to soil pipes and flushing cistern, complete all as specified and as directed by Engineer-in-Charge.

S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) with P or S trap but including plastic water closet seal, black, closed pattern with flat bottom, and seat cover, spray jet and mild steel chromium plated or aluminium hinging device including connection to drain and flush pipe, complete all as specified and as directed by Engineer-in-Charge.

S&F in repair Vitreous China Wash hand Basin size 550x400mm (flat back or angle back type) including 32mm dia brass chromium plated waste fitting a pair of cast iron bracket duly painted / erecting stand including cutting and pinning in ends making good disturbed surfaces in CM 1:3 including taking down unserviceable wash hand basin and connected items of any description, complete all as specified and as directed by Engineer-in-Charge.

S&F in repair single piece EWC (concealed 'P' or 'S' trap) with soft close seat cover incl flushing cistern, PVC connection pipe 15mm dia and all internal fittings(twin flush) incl taking down the old complete all as specified and as directed by Engineer-in-Charge.

S&F in repair vitreous china Urinal half stalled type white (excluding flushing ciestern) fixed completely and complete all as specified and as directed by Engineer-in-Charge.

S&F Celene counter top WHB of any colour with extended counter size 1015 x 465mm, complete all as specified and as directed by Engineer-in-Charge.

S&F in repair Sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed by Engineer-in-Charge. Make : Nirali, Cera, Jaina Etc.

S&F in repair seat and cover for pedestal pan white/black closed pattern with flat bottom and cover and MS chromium plated aluminium hinge device, complete all as specified and as directed by Engineer-in-Charge.

S&F in repair 10 ltr PVC valveless, syphonic action type, flushing cistern and flush pipe, low level, white, with inlet, ball valve, float and handle including brackets,complete all as specified and as directed by Engineer-in-Charge. . Make : CERA, Hindware, Jainko etc.

S&F in repair Bib taps of 15mm bore long body, fancy type, chromium platedcast copper alloy with crutch or butterfly handle screwed down for iron pipe or for brass ferrule and fixed, complete all as specified and as directed by Engineer-in-Charge.

S&F in repair 15mm dia Angle valve fancy type chromium plated,screwed down,high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed, complete all as specified and as directed by Engineer-in-Charge.

ditto- all as above sl item No 30, but but fancy type, CP with long shank and cup (concealed type), complete all as specified and as directed by Engineer-in-Charge.

S&F in repair Self closing Angle cock pressmatic for Urinal with wall flange with complete connecting accessorries,complete all as specified and as directed by Engineer-in-Charge.

S&F 15mm bore Pillar cock, fancy type chromium plated, screwed down high pressure with or without lettered HOT or COLD with long screwed and fly-nuts screwed for iron pipe or brass ferrule and fixed in repair, complete all as specified and as directed by Engineer-in-Charge.

S&F in repair CP mixture 15 mm bore for wall mixture with hot & cold water screw down for iron pipe, complete all as specified and as directed by Engineer-in-Charge.

S&F in repair 15mm bore CP wall mixture with / without hand shower arrangement with connecting legs, wall flanges & wall brackets for hand shower, complete all as specified and as directed by Engineer-in-Charge.

S&F in repair 15mm bore CP WHB centre Hole Single lever mixer for mixing hot & cold Water screwed down for iron pipe, complete all as specified and as directed by Engineer-in-Charge.

S&F in repair 15mm bore CP single lever sink mixer (wall mounted) with 180 mm(7") long swivel spout, connecting legs and wall flanges, complete all as specified and as directed by Engineer-in-Charge.

S&F in repair brass, chromium plated or stainless steel Toilet paper holder with flat recessed type stainless steel complete all as specified and as directed by Engineer-in-Charge.

S&F in repair Soap dish fancy type chromium plated fixed with brass screws and wooden / plastic cleats complete all as specified and as directed by Engineer-in-Charge.

S&F in repair brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges, complete all as specified and as directed by Engineer-in-Charge.

S&F in repair Towel ring size 600mm length, complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated brackets, guard and railing 60 cm long all as approved complete all as specified and as directed by Engineer-in-Charge..

S&F in repair CP corner glass shelf (Large) size 300X300 mmcomplete all as specified and as directed by Engineer-in-Charge.

S&F in repairs 32mm / 40mm dia Waste coupling of PTMT / CP (half or full threaded) suitablr for wash basin and sink. (Minimum weight 32mm-45gms) complete all as specified and as directed by Engineer-in-Charge..

S&F in repairs 32mm dia Waste coupling of PTMT/CP (half or full threaded) but suitable for urinals, (Minimum weight 32mm-45gms) complete all as specified and as directed by Engineer-in-Charge..

S&F in repair Stainless steel / Powder coated Peg set of five hooks of good quality, complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs Geyser connection pipe, 12mm dia, 450mm length, complete all as specified and as directed by Engineer-in-Charge.

S&F in repair Cabinet Mirror with PVC body and openable shutter, shelves and size 350 mm x 450 mm complete all as specified and as directed by Engineer-in-Charge.

S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed by Engineer-in-Charge.

S&F in repair CP seat jet with one meter PVC Tube (CP) as approved by Engr in Charge complete all as specified and as directed by Engineer-in-Charge..

S&F 32/40mm dia PVC waste pipe with cap socket complete all as specified and as directed by Engineer-in-Charge.

S&F PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and as directed by Engineer-in-Charge.

S&F in repair CP grating doom 100 mm dia. (minimum weight 25 gms), complete all as specified and as directed by Engineer-in-Charge.

S&F in repair CP grating doom 125 mm dia with waste hole complete all as specified and as directed by Engineer-in-Charge.

S&F in repair Brass CP Shower rose 125mm size with or without swivel joints, including fixing to steel pipe or union, complete all as specified and as directed by Engineer-in-Charge.

S&F in repair CP liquid soap dispenser complete all as specified and as directed by Engineer-in-Charge.

Taking up or down 15mm dia bore steel tubing and connections, including cleaning for refixing or removal, complete all as specified and as directed by Engineer-in-Charge.

M&L for steel tubes, 'medium grade' galvanised 15 mm bore dia, with all fitting and fixed complete to walls and ceilings or laid in floors, complete all as specified and as directed by Engineer-in-Charge.

Fixing only Tubes, 'medium grade' galvanised 15mm bore dia, with all fitting and fixed complete to walls and ceilings or laid in floors, complete all as specified and as directed by Engineer-in-Charge.

Taking up or down 20mm dia bore steel tubing and connections, including cleaning for refixing or removal, complete all as specified and as directed by Engineer-in-Charge.

M&L for steel tubes, 'medium grade' galvanised 20mm bore dia, with all fitting and fixed complete to walls and ceilings or laid in floors, complete all as specified and as directed by Engineer-in-Charge.

Fixing only Tubes, 'medium grade' galvanised 20mm bore dia, with all fitting and fixed complete to walls and ceilings or laid in floors, complete all as specified and as directed by Engineer-in-Charge.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and as directed by Engineer-in-Charge.

S&F in repair PVC (SWR) pipes, 110mm dia, single socketed, in any length with rubber ring joints, fixed to walls, complete all as specified and as directed by Engineer-in-Charge.

S&F in repair PVC (SWR) pipes, 75mm dia, single socketed, in any length with rubber ring joints, fixed to walls, complete all as specified and as directed by Engineer-in-Charge.

S&F in repair PVC (SWR) 75mm dia floor trap, plain with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4), complete all as specified and as directed by Engineer-in-Charge.

S&F in repair PVC (SWR) bends 110mm bore, complete all as specified and as directed by Engineer-in-Charge..

All as per item No 68 above, but provided with access door complete all as specified and as directed by Engineer-in-Charge.

S&F in repair PVC (SWR) 110mm bore branch piece, single (single Y) equal or unequal provided with access door complete all as specified and as directed by Engineer-in-Charge.

S&F in repair PVC (SWR) 110mm bore branch piece, double (double Y) equal or unequal provided with access door complete all as specified and as directed by Engineer-in-Charge.

S&F in repair PVC (SWR) 110mm bore junction double, (double T) equal or unequal complete all as specified and as directed by Engineer-in-Charge.

S&F in repair PVC (SWR) 110mm bore reducer complete all as specified and as directed by Engineer-in-Charge.

S&F in repair PVC (SWR) bends 75mm borecomplete all as specified and as directed by Engineer-in-Charge.

All as per item No 79 above, but provided with access door complete all as specified and as directed by Engineer-in-Charge.

S&F in repair PVC (SWR) 75mm bore Vent cowl complete all as specified and as directed by Engineer-in-Charge.

M&L in repair Cast Iron Nahani Trap with dia of outlet 100mm with CI grating including jointing to waste pipe fixed in cement concrete PCC 1:2:4 type B-1 complete all as specified and as directed by Engineer-in-Charge.

TARUN BUILDERS

DAVINDER SINGH

SHIVAE CONSTRUCTION

APARANA ENTERPRISES

PARAS RAM ASGOTRA AND SONS