SPECIAL REPAIRS TO 20 QUARTERS IN TWO BLOCKS (P-75 AND P-12) AT DAD RESIDENTIAL COMPLEX, LEKHANAGAR UNDER GE NASIK ROAD CAMP

Amount

Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc.

M & L for brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 using old size bricks.

M & L for brickwork with fly ash bricks, straight or curved on plan to any radius i n half brick thick walls, built in cement mortar 1:4 using old size bricks.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.

M & L for rendering 15mm thick in cement mortar 1:4 on faces of brick work or concrete surfaces finished even and smooth without using extra cement. Note: Redering is to be carried out in two coats 10 mm + 5mm, finishing coat with WPC as specified and directed. WPC shall be paid separately.

M & L for rendering 10mm thick in cement mortar 1:6 on faces of brick work or concrete surfaces finished even and smooth without using extra cement.

M & L for rendering 5 mm thick in cement mortar 1:3 to ceiling ,soffits and sides of facias,cannopies,chajjas,shelves,cupboard etc.

Supply only liquid water proofing compound.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises .

M & L for double charged Virified Ceramic tiles 600mm x 600mm x 10 mm thick , in floors/skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M & L for double charged Virified Ceramic tiles as in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and over and including 10 mm thick backing coat cement mortar 1:4 complete all as specified and directed.

M&L for glazed ceramic tiles coloured size 450x350x7mm thick in vertical surface, set and jointed in neat cement slurry & pointed with coloured cement to match laid over and including rendering 10mm thick in cement mortar 1:4 as in backing coat on fair surfaces of brick wall

M & L for non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm and n exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including cement screed bed 20mm thick in cement mortar 1:6 complete all as specified.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm and n exc 0.18 sqm as in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including cement screed bed 10mm thick in cement mortar 1:4 complete all as specified.

Dismantling of stone slabs & tiles of any decsription or thickness in floors, aprons,steps etc laid, bedded & pointed in any mortar.all as specified and directed.

M&L for Granite (Telephone black/Ruby red) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite 18 to 20mm thick. all as specified and directed.

M&L for Machine cut cudappah stone slab 20-25mm thick over and including cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete

M & L for Machine cut kota stone slab as in flooring/tread 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete. Note:Rubbing and polishing shall be mirror polished all as specified in SSR Part-I.

M & L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete. Note:Rubbing and polishing shall be mirror polished all as specified in SSR Part-I.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations. (Stone slabs so provided shall be not less than 900mm in length)

S & F Vitreous China water closet squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete including provision of lime concrete bedding and P/S trap fixed in repairs.

S& F in repairs Vitreous China wash basins white, flat back, size 550 x 400mm, including cutting for and pinning in ends of brackets or erecting stand and waste coupling 32mm of PTMT (Minimum weight 45gms) half or full threaded fixed in repairs. Note:wash basin shall conform to IS 2556(part-4)-2004.

S&F for 10 Litres PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including flush pipe and brackets fixed in repairs. Specification of flushing cistern shall be as per IS 7231-1994.

S& F Cast iron nahani trap 75mm dia of outlet, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4)

Taking up or down steel tubing and connections 15mm bore.

Taking up or down steel tubing and connections 20mm bore.

Refixing old steel tubing and connections 15mm bore in new or old position (Walls, ceiling, floors, etc.)

Refixing old steel tubing and connections 20mm bore in new or old position (Walls, ceiling, floors, etc.)

S & F 15mm bore galvanised steel water tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors.

S and F 20mm bore galvanised steel water tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors.

S & F 15 mm bore bib taps, fancy type, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed. Note:Specification all as specified in SSR Part-I(2009).

S & F in repairs 15mm bore stop valves, cast copper alloy, fancy type, chromium plated with long shank and cup (concealed type) screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed. Note:Specification all as specified in SSR Part-I(2009).

S & F in repairs 15mm bore stop valves, cast copper alloy, fancy type, chromium plated (angle type) screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed. Note:Specification all as specified in SSR Part-I(2009).

S&F in repairs chromium Plated cast copper alloy pillar tap with capston heads fancy type fixed to iron pipes 15mm dia. Note:Specification all as specified in SSR Part-I(2009).

S & F in repairs Brass chromium plated shower rose 125mm size with swivel joint, including fixing to steel pipe or union 15mm bore.

S & F in repairs PVC connections 15mm size with PTMT nuts of length 450mm

S & F in repairs Brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges.

S&F in repairs 8mm thick glass shelf "Corner" type size 300mm x300mm including necessary brackets front edge of glass rounded and woulded with CP railing complete, fixed in repairs .

S & F Sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495 mm x 420mm bowl size 410mm x 330mm x 160mm. Note:SS sink shall be manufactured from Salem Stainless steel grade A1 S1 305

S & F in repairs kitchen plate rack made out of stainless steel 0.8mm thick complete of size not less than 1550x750x200mm, duly assembled and fixed to wall with wall screws / fasterners all as specified and directed.

Dismantling of PVC rain/vent/waste pipe any bore

S & F PVC (SWR) bends, any radius 110 mm bore with oval access door complete all as specified and directed.

S & F PVC (SWR) branch piece, double (double Y) equal or unequal 110 mm bore with access door all as specified and directed.

S & F PVC (SWR) junction (single 'T') equal or unequal, bore 110 mm with access door, complete all as specified and directed.

S & F PVC (SWR) pipe single socketed 110 mm bore, any in length with rubber ring joints fixed to walls complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frame) exc 1.5 sq. m but n exc 4 sq. m each.

Taking down chowkhats or frames with shutters (without taking off shutters from the frame) n exc 1.5 sqm each.

S & F 2nd class hardwood plain, solid,straight, chowkhats & frames, wrought,framed, rebated on the solid,rounded or champered,put togetherwith glue pinned at joints , supplied and fixed.

M & L for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp?ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVCfoil of minimum 14 microns thick of approved designpasted with hot melt adhesive on both faces of shutterand fixing with stainless steel butt hinges of requiredsize with necessary full body threaded star headedcounter sunk S.S screws, all as per direction of Engineer In- Charge.

S&F hold fasts confirming to FE-290 Gde E165.

Preparing the surfaces of wood and wood based material,steel and iron work, new or old and treated with tar or coal tar black paint treating ends of pasts, backs of chowkhats etc area tarred exc 0.1 Sqm each.

S&F factory made solid PVC door frame of size 50mm x 47mm made out of 5 mm plain colour PVC sheet reinforced with MS suquare tube, suppling and fixing in opening as per specification and drawings .

S&F Factory Made Solid PVC Moulded Door Shutter, with particle board core 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm prelam PVC Sheet on back face and as directed by Engineer in-charge.

S&F 2nd class HW glazed and skelton shutters, 35 mm thick made glazed and skelton shutter, open rebated and prepare to receive glass, gauze etc without sashbars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc sizes of members as specified in SSR Part-I section 8, clause 8.24 (a) supplied and fitted to chowkats. all as specified and directed by Engr-in-Charge.

S and F 40 mm thick Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed.

S & F 150mm size aluminium handles, cast type, anodised.

S & F 150mm size aluminium anodised, barrel tower bolts of extruded section and fixed.

S & F 250mm size aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed.

100mm butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21.

Taking down steel window/ventilators frames with shutters including guard bars of any description and any size,making good jambs,cills and soffits to receive new frames and shutters complete all as specified and as directed.

S&F powder coated aluminium frame for doors , window , ventilators with one or more rebates including joining cleat for fixing etc complete all as specified ( Minimum thickness of powder coating 50 micron.) complete all as specified and directed.

S&F powder coated aluminium window, ventilators shutters sliding/fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary jioning cleats , glazing clips, rubber packing anodised aluminium snap beading , screws etc complete all as specified ( Minimum thickness of powder coating 50 micron.) complete all as specified and directed.

M&L for 5.00mm thick sheet glass, ordinary quality and glazing in Aluminium window and frames as specified and directed.

S&F stainless steel wire cloth 0.36mm normial dia of wire and avg width of aperture 1.40mm and fixed with and incl nut and bolts or fillets etc to window or doors complete all as specified and directed.

Dismantling water tanks exc 500 & n exc 1000.

S & F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 1000 litre capacity, hoisted and fixed in position all as specified. Note: Tank shall conform to IS 12701(1996).

S&F in repairs ball valves, 20mm bore high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 2 1 0 gms.) .

M&L for complete removal of existing treatment preparation of old decorated plastered surfaces incl brooming down moulds & efforecent salt and trading oil and greasy spots and applying three coat of white washing on walls complete all as specified and as directed.

Complete removal of existing treatment of old decorated surfaces on walls.

Complete removal of existing treatment of old decorated surfaces on ceiling.

M & L for 3mm thick wall care putty on walls in two coats.

M & L for 3mm thick wall care putty on ceiling in two coats.

M & L for Two coats of oil bound distemper on walls, white or tinted over two coat of alkali resistant acrylic primer incl prepatory work complete all as specified and as directed. Note: OBD shall be of premium quality as approved by GE.

M & L for Two coats of oil bound distemper on ceiling, white or tinted over two coat of alkali resistant acrylic primer including prepatory work complete all as specified and as directed. Note: OBD shall be of premium quality as approved by GE.

M&L for prepration of old painted wooden surface of any description not other wise described exc 10 cm width or grith and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for prepration of old painted wooden surface of any description not other wise described exc 10 cm width or grith and applying two coat of synthetic enamel paint complete all as specified and directed.

M&L for prepration of old painted steel surface of any description not other wise described exc 10 cm width or grith and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for prepration of old painted steel surface of any description not other wise described exc 10 cm width or grith and applying two coat of synthetic enamel paint complete all as specified and directed.

Taking down carefully existing bituminous membrane/tarfelt treatment any description and cleaning and making good damaged surface of roof ,parapet,facia etc in cement mortar 1:3/PCC 1:2:4 as directed by engr-in-charge where ever require.quotated rate shall be deemed to be inclusive of complete removal of swollen plaster wherever directed by Engr-in-charge and removing rubbish out of defence land.

Waterproofing on roof including flashing and junctions of parapet,kerb, wall etc.as under :- (a) M&L 15 mm thick cement mortar screed/plaster with integral WPC on roof slab, parapet ,kerbs etc. (b) Cleaning of plasetered roof,parapet,facia surface and applying one coat bituminous primer @ 0.70 kg per sqm. (c) Laying a layer of APP based polymeric membrane,3 mm thick(minimum),weighing not less than 3.60 kg/Sqm Actic polypropylene polymar (APP) modifide bitumen based prefabricated five layer waterproofing membrane reinforced with polyester non woven fabric(weighing not less than 160 gms/sqm) shall be applied over compatible primer at 0.40 litre/Sqm of density at 25 degree Centigrade 0.87-0.89 Kg /Litre and viscosity 70-160cps or cold sticker, application of APP modified membrance shall be by torch application. The overlaps shall be minimum 150mm on the transverse direction and 100 mm on the longitudinal direction. (d) Apply two coats of bitumastic aluminium paint @ 0.15Kg/Sqm over the membrane.. (e) APP membrance,Primer and bitumastic aluminium paint shall be of same brand. (f) For vertical surfaces i.e. parapets,wall etc. app membrane shall be tucked into groove and sealed with silicon sealant i.e. "Dowsil 789 weatherproofing silicon sealant" using gun.

Demolition of concrete (unreinforced) of any description and in any position not otherwise specifically provided for.

M & L for Providing, cement concrete type B0 1:2:4 (12.5mm graded aggregate) in roof kerbs or mud stops,padding, rounded or chamfered on edges.

M & L for Providing, cement concrete type B1 1:2:4 (20 mm graded aggregate) in steps, parapets and copings, kneelers, bases for water tanks, bed plates and the like including weathering, slightly rounded or chamfered angles and throating, as directed including necessary formwork.

M&L for 75 mm thick cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate as in plinth protection laid to slope of 1:12 and finishing cement concrete surfaces even and smooth without using extra cement with and including necessary formwork to divide the area in panels finishing exposed edges fair and rounding or chamfering of exposed edges where directed and providing 10 mm thick joints through the thickness of plinth protection duly filled with mastic filling of one part of hot bitumen 85/25 grade and three parts of fine sand complete all as specified and as directed.

S&F stainless steel drapery rod dia not less than 25mm and weight not less than 0.350Kg per RM, complete all as specified and directed.

S & F stainless steel brackets made out of 10mmx2mm for fixing of drapery rod in wall including necessary fixing arrangement and stainless steel screw for holding drapery rod complete all as specified and directed.

S & F stainless steel stud for drapery rod of pattern as approved, suitable for drapery rods of 25 mm dia including screw for fixing complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified.

M and L for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165

Dismantling plain or corrugated steel sheeting any gauge, thickness, including Nainita or similar pattern roof coverings complete all as specified and as directed.

S&F for 2mm thick plain/corrugated Polycarbonate Sheet with including all necessary fixtures and fastenings to be fitted over roof top. Work to be executed at a ht of 10 m and above.

M and L for Mild Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240. Work to be executed at a ht of 10 m and above.

Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165

S&F PVC (SWR) vent cowl 110mm bore

Mild steel screw bolts,dia of neck 16-20 mm (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut length exc 5cm but n.exc 10 cm complete all as specified and as directed.

S & F 110 mmPVC(SWR) P trap complete all as specified and as directed.

S & F PVC gully trap 125/10 mm setting and jointing in solven cement. Complete all as specified and as directed.

S & F in repairs 3 mm thick figured glass,pin head type and glazing with oil putty in squares not exc. 0.5 sqm in each pane complete all as specified and as directed.

Dismantling boarding, any description, fixed in any position with nails

M and L Prelaminated particle board, interior grade, 18/19mm thick, prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with screws to timber frame works complete all as specified and as directed.

M and L for repair to broken edges of RCC chajjas,roof projections,fins,facia and similar works by dismantling of loose and damaged/disintegrated portion of edges with any cross sectional area with cement mortar 1:4 or cement concrete 1:1.5:3 type A0 and chicken wire mesh with nails to hold fresh mortar and concrete including necessary formwork and scaffolding for work upto 2 storey buildings and finishing the surfaces to the entire satisfaction of engr-in-charge.

M&L for special treatment to sunken portion with 10mm thick plaster in CM 1:4 by using Ditachment DM 1% by weight of cement and surface made smooth after curing period two coat of Ditachment DS shall be applied @2.50 Kg/Sm. The paste like consistancy like is made by using 2.5 Kg of Ditachment DS powder in one litre of admixture (The admixture is made by dissolving 1 part by volume of Nafufill SBR & 4 part by volume of water). After 7 days curing, testing shall be done by flooring for 72 hours. Finally protective plaster coat of 10mm thick in CM 1:4 shall done by using Putz Ditachment 1% by weight of cement over layer of Detachment DS. All joints of CI Pipe, Nahani trap, WC connection etc. shall be filled by mixture of cement, fine sand and 10% Nafufill SBR by weight of cement 32mm dia 450mm long GI Spout light grade shall be provided in all sunken slabs to drain off water

Plastering on walls in cement mortar 1:4 in patches not exc. 3 Sqm on the buildings upto four storied, including taking down old plastering on walls, any description including finishing the surface to match existing surfaces including necessary scaffolding and finishing the surface by white wash or cement base paint to match the surface with existing work.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth

S and F Door closer hydraulically regualated,AL extruded section body designation No.3,universal type,suitable for door shutter of szie 851 to 1000 mm in width and weight between 61 to 80 kg complete all as specified and as approved by engr-in-charge.

S and F 150 mm floor door stopper of aluminium alloy body and tongue,anodised with hard drawn steel spring fixed in floor complete all as specified and as directed.

S and F Brass CP fancy type single lever Wash basin mixer with popup waster for mixing hot and cold water with 450 mm long braided hoses including necessary fitting for connection screwed down for iron pipe and 15 mm bore complete all as specified and as directed.

S and F Vitreous china premium/ 1st quality wash down water closet wall hung EWC white/ ivory/off white (closed pattern incl all necessary accessories like rag bolts/ gel gasket /sheet cover etc. (excluding flushing cistern & flush pipe) complete in all respect all as specified.

S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm diapipe with 1.25 metre long flexible tube and ABS wall hook including makingconnections and fixed in position complete in all respect as specified.

M and L for brass CP angle cock heavy duty 15 mm dia capstan head complete all as specified and as directed.

Taking down shutter of any description exc sqm but n.exc 2 sqm each

M and L for Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed of bore 32 .complete all as specified and directed.

M & L for Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm over new /old surfaces. Note: Paint and primer shall be of same make. Make Paint: Berger weather coat long life 10/ Asian apex Ultima/any other equivalent make as approved by GE Make primer: Berger Damp shield Elasto/Asian Smartcare Damp Sheath Exterior advanced.

Excavation in trenches not exc.1.5 mtr wide and not exc.1.5 m in depth for foundation of poles, stay assembly and laying of LT/HT cable as in any type of soil and getting out, complete all as specified and directed.

Returning, filling, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm in any type of soil, complete all as specified and directed.

Removal of excavated material to a distance not exc.50 m and depositing where directed at a level not exceeding 1.5 mtr above starting point.

Material and labour for Double Walled Corrugated DWC Pipe of outer dia 110mm and inner dia 95mm including 90 degree bends with coupler and rubber ring laid in trenches of size 110 mm suitable for cable protection complete all as specified and directed.

Material and labour for Double Walled Corrugated DWC Pipe of outer dia 50mm and inner dia 38mm including 90 degree bends with coupler and rubber ring laid in trenches of size 50 mm suitable for cable protection complete all as specified and directed.

Supply laying & testing cable XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area of following sizes including taking down:-

95 Sqmm 3.5 Core

35 Sqmm 3.5 Core

16 Sqmm 4 Core

Supply laying & testing XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) with aluminium conductor, 11000 volts earthed, grade cross sectional area 95 sq. mm 03 core including taking down.

S&F GI water tubing 100 mm bore 'medium grade', galvanized, with all fittings like socket, union, elbow, bend, tees etc jointed and laid in trenches complete all including taking down or as specified and as directed by Engr-in-Charge.

Blank

Supply and fixing in repair LED flood light 120 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp.

Supply & fixing in repair MCCB of 200A, 4 pole, 36 KA

S&F in repair cable jointing kit for 11KV(Earthed) grade cable for outdoor termination heat srink type joint complete with jointing material & accessories suitable for 3 core XLPE armoured aluminium conductor of 95 Sqmm.

S&F in repair cable jointing kit for 1100 V(Earthed) grade cable for outdoor termination heat srink type joint complete with jointing material & accessories suitable for 3.5/4 core XLPE armoured aluminium conductor of 95 Sqmm.

M&L Earthing complete with galvanized steel earth plate electrode 600mm x600 mm x 6mm buried directly in ground vertically to a depth not less then 2.25 meter below normal ground level with top edge of the plate not less then 1.50 meter below normal ground level connected to galvanized iron strip 32x6 mm as earthing lead by means of bolts ,nuts ,check nuts and washers complete up to and including test point made out of 40 x 6mm alum flat including earthing pit , charcoal, common salt ,earthing lead 4.00mm dia up to 7.5m, 20mm dia medium grade GI watering pipe ,G.I. protection pipe 15 mm dia up to 7.5m long, PPC pit in PCC 1:2:4 type B-1 using 20 mm graded stone aggregate ,PCC pit cover including earth work complete all as shown in electrical plate No. 05 of SSR-1991 (part - I).

Supply and fix in repair ON LOAD change over switch 415 V in sheet metal enclosures 4 pole of capacity 400 Amps.

Taking up or down GI Tubing and connections including cleaning for refixing or removal to store - of size :-

20 mm dia

25 mm dia

40 mm dia

Supply and laying in trenches GI Tubing medium grade with all fittings. of size :-

40 mm dia

25 mm dia

20 mm dia

Removing Unserviceable Gate valve/stop valve of water supply lines, closing the opening with plug or preparing for new as required necessary fitting complete and deposited to E/M store yard of size :-

20 mm dia

25 mm dia

40 mm dia

Supply and fix Gun metal Globe or Gate valve with iron wheel head, screwed both ends for iron pipe and fixed with required necessary GI fittings complete of size dia :-

40 mm dia

25 mm dia

20 mm dia

Supply and fix in repair CI sluice valve 150 mm dia both ends flanged and drilled, bonnet wedge wedge stuffing box. Gland trust plate, hand wheel made out of grey CI, complete valve confirming to IS 14846 and its fittings suitable for hydraulic test pressure of 15 Kg/sqcm PN 1.6 ISI marked complete all as specified and directed

Taking out of centrifugal pump set from foundation after disconnection from motor and transportation of workshop, dismantling the pump for repair/overhauling including cleanning of all parts of pump assembly throughly, including machine work of pump shaft inorder to obtain smooth finish including machine work of pump shaft inorder to obtain smooth finish including helium gasket sheet not less than 1mm thick & to the entire satisfaction of engr-in-charge all as specified and directed. Make - Kirloskar, DSM-65-32A (Note:- Spares as required shall be measured & paid separately against the relevant items as supply only)

Supply only Casing Wear Ring

Supply only Shaft Sleeve

Supply only Inter Stage Ring

Supply only Ball bearing DE SKF

Supply only Ball bearing NDE SKF

Supply only Bearing cartridge DE

Supply only Bearing cartridge NDE

Supply only Split Gland bush

S & F water meter 150 mm dia flanged type make- Chamble

Supply, install, test and commisioning of open well submersible pump, electric driven 415 V, TP suitable for open well, complete upto 5 HP, upto 45 meter head, inclusive of 40 metre long submersible cable and starter, all as specified and directed by Engr-in-Charge.

Supply, install, test and commisioning of open well submersible pump, electric driven 415 V, TP suitable for open well, complete upto 2 HP, upto 40 meter head, inclusive of 40 metre long submersible cable and starter, all as specified and directed by Engr-in-Charge.

Taking up cast iron water mains including flanged rubber joints with spigot and socket ends and lead joint burning out and recovering lead of size 150 mm

Supply and laying cast iron pipes with spigot and socket ends, tyton ring, centrifugally cast, Class LA, in any length laid in trenches of size 150 mm

Supply and laid spigot and socketed CI fittings. Such as bends (any type radius and angle), tapers, tees, collars & tail piece socket/flanged/spigot etc of size upto 150 mm dia

M&L Earthing complete with galvanized steel earth plate electrode 600mm x600 mm x 6mm buried directly in ground vertically to a depth not less then 2.25 meter below normal ground level with top edge of the plate not less then 1.50 meter below normal ground level connected to galvanized earth wire 4.00mm dia by means of bolts, nuts, check nuts and washers including earthing pit, charcoal, common salt, earthing lead 4.00mm dia up to 7.5m, 20mm dia medium grade GI watering pipe ,G.I. protection pipe 15 mm dia up to 7.5m long, PPC pit in PCC 1:2:4 type B-1 using 20 mm graded stone aggregate ,PCC pit cover including earth work of any type of soil/strata all as shown in electrical plate No-5 of SSR-1991 (part-I) connected to earthing test point all as specified or indicated including testing on completion

Boring of holes under road, pavement, hard standing by trenchless technology using ultra sounding technique and necessary machine including HDPE pipe of 150 mm dia suitable for 0.4 mps working pressure.

Material & labour for construction of masonry valve pit chamber (Masonry) of size internally dimension 1.0 x 1.0 x 1.10 mtr depth (internal dimension) with sub class 'B' bricks in cement mortar (1:4) and 10 mm thick plastering in cement mortar 1:4 and PCC (1:4:8) type D-2 in foundation PCC (1:3:6) type C-1 as in bedding and PCC (1:2:4) type B-1 in coping including 40 x 40 x 6 mm MS angle iron frame , 3mm thick MS cover plate with locking arrangement and paints over a coat of red oxide primer including surface preparation all as directed.

M&L in repair for run lead joints complete for water mains with spigot & Each socket pipes and fittings, all as specified and directed. 150 mm Bore of pipe

Supply & fix in repair for rubber tyton joint of 150 mm size

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.

Taking down and hanging during point wiring of ceiling fan/exhaust fan of any size and sweep in proper manner and connecting up including provision of cable from ceiling rose or connector to fan all as per specified and directed by Engr-in-Charge

Dismantling unserviceable main switch/DBs with MCBs and wooden board including making good disturbed surface of wall.

Taking down sub main wiring of any size/capacity complete all as specified and making good disturbed sufaces to match with the existing surfaces.

Point wiring with PVC insulated unsheathed stranded copper conductor cable of size 1.5 Sqmm, with PVC insulated unsheathed stranded copper conductor cable of size 1.5 Sqmm stranded for earth continuity wire, to be drawn in and including, PVC medium grade surface casing capping not less then 20 mm width with MS sheet metal sunken switch/Terminal box 1.2 mm thick and ebonite switch board cover 3.0 mm thick or PVC moulded switch board and brass screws with cup washers including all necessary wall cutting and making good disturbed surface all as directed and specified. Note : Cutting chases and making good to match with the adjoining surface shall be included in the unit rate.

(a) One light point controlled by one, one way switch

(b) One ceiling /exhaust fan point controlled by one switch and regulator

(c) One 3 pin 5 amp socket out point on the same board with other switches.

(d) One 3 pin 5 amps socket out let point on independent board

(e) One bell/buzzer point controlled by one bell push.

All as per same in item No 153 above but for one socket outlet 15 amp on independent board with 2.5 Sq. mm cable and 2.5 Sq.mm. earth wire.

S &F Switch piano flush type single pole one way 5 amps.

S &F Socket outlet 2 in 1, 3 pin, 6A

S &F Switch socket combination 2 in 1, 6A flush type

S &F Switch socket combination 2 in 1, 3 pin, 6 and 16 Amp flush type universal

S &F Ceiling rose, 3 phase/PVC/polycarbonate, isolated body

S &F Buzzer, Ding Dong AC. 230 volts, single pole

S &F Bell push, flush type, 5 amp.

S &F Electronic regulator 100/120 Watt step type

S &F Lamp holder insulated body with back plate for angle holder including 9W LED Lamp all as per specified.

Supply and fixing LED lights fitting 1x 20W, 220V, AC, decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete.

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.

Material and labour for sub main wiring power/circuit using PVC insulated unsheathed, stranded copper conductor cable 2 Single core of size 4 Sqmm, earth continuity conductor of size 2.5 Sqmm to be drawn through and including PVC CASING CAPING not less then 32 mm dia medium Grade fixed on walls/roof/floors all as directed by Engineer in Charge. Notes:- Two wires of 4 sqmm and one wire of 4 sqmm for earthing and one run of PVC casing/caping shall be measured as one unit.

S&F in repair Sheet metal enclosure factory made for DBs single pole and neutral double door 240 volts 12 way with 200 Amps rated bus bar fixed on walls, including dressing and connecting both incoming and outgoing cable termination with proper taping, lagging testing and commissioning and making good of wall, surfaces all as specified and directed.

S&F Sheet metal enclosure factory made for DBs single pole and neutral double door 240 volts 6 way with 200 Amps rated bus bar fixed on walls, including dressing and connecting both incoming and outgoing cable termination with proper taping, lagging testing and commissioning and making good of wall, surfaces all as specified and directed.

S&F MCB, single pole and neutral, 240 Volts , 40-63 Amps all as specified and as directed.

S&F MCB, single pole and neutral, 240 Volts , 6-40 Amps all as specified and as directed.

S&F MCB single pole 240 Volts , 32 to 63 Amps all as specified and as directed.

S&F MCB single pole 240 Volts , 6 to 32 Amps all as specified and as directed.

M/S SAMEER SUBHASH PATANI

MAHIMA CONSTRUCTION

MANOVANDANA CONSTRUCTION

UNITED ENTERPRISES

sunway associates