Construction of Munsif Court and Lawyers Litigation Block for Court Complex at D.H. Pora Kulgam (Balance work).

Amount

Brick work with common burnt clay F.P.S (non-modular) bricks of class designation 7.5 in superstructure above plinth level upto floor V level in all shapes and sizes including curing in Cement mortar 1:6 ( 1 cement : 6 coarse sand) incl. all carriages complete job.

Half brick masonry with common burnt clay F.P.S (non-modular) bricks of class designation 7.5 in superstructure above plinth level upto floor V level including curing in : Cement mortar 1:4 ( 1 cement : 4 coarse sand) i/c providing and placing in position 2 Nos. 6mm dia. M.S. bars at every third course of half brick masonry. incl. all carriages complete job.

15 mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 6 ( 1 cement : 6 fine sand) incl. all carriages complete job.

12 mm thick Cement plaster on ceilings etc of mix: 1 : 4 ( 1 cement : 4 fine sand) upto floor V level complete in all respects incl. cost of all material, leads, lifts and carriages etc upto site of work complete.

P/F UPVC sliding/casement/fix doors in white colour, frame 60mm thick (min) x 45mm (min) with 1.5mm GI reinforcement sash 39mm (min)/58mm (max) with 1.25mm GI U section reinforcement with rubber gasket of grey/black colour 10 years warranty against weathering of profile with complete hardware fittings fixed with 8mm thick high pressure laminated board panels as per design and with 5mm toughened glass and fiber jalli option if pre-fabricated on german fabrication system (mosquito sash 18mm (min) x 43mm (min) with welded corners complete at site. incl. all carriages complete job.

P/F UPVC system in walls in white colour, frame 60mm thick (min) x 45mm (min) with 1.5mm GI reinforcement sash 39mm (min) x 58mm (min) with 1.25mm GI U section reinforcement with rubber gasket of grey/black colour 10 years warranty against weathering of profile with complete hardware fittings fixed with 8mm thick high pressure laminated board panels as per design and with 5mm toughened glass and fiber jalli option if pre-fabricated on german fabrication system (mosquito sash 18mm (min) x 43mm (min) with welded corners complete at site. incl. all carriages complete job.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately) incl. all carriages complete job.: First class deodar wood

Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35mm thick i/c ISI marked S.S butt hinges bright finished of required size with necessary screws incl. all carriages complete job.

Extra for providing lipping with 2nd class teak wood battens 25mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured) incl. all carriages complete job.

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately) incl. all carriages complete job. First class kail wood 35 mm thick.

Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge incl. all carriages complete job. : First class kail wood 35 mm thick

P/F water proof ply wood 19mm thick hold on single section structural steel for judges bench including with fixing loading, unloading etc complete job

P/F Wooden planking, tongued and grooved in flooring including fixing withiron screws complete incl. all carriages complete job.: Second class teak wood i/c budloo wood framework.

Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer incl. all carriages complete job.

P/F hardware fittings of approved brand and of required type as approved by Engineer in charge, complete as per the specifications incl. all carriages complete job.

Tower bolts 100mm (windows)

handle 125mm (windows)

I-Hooks 150mm

L-drop 250mm

Tower bolts 150mm (doors)

handle 150mm (doors)

butt hinges of 100x63x3.2 mm

P/F 4mm thick clear plain glass for fixed glazing panels/ shutters (only panel area to be measured) i/c cost of teak wood beading of required size complete incl. all carriages complete job.

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) incl. all carriages complete job.

Granite work in floors: Providing and fixing 18mm gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels Granite of any colour or shade (Area of slab over 0.5 sqm) incl. all carriages complete job.

Granite work on walls/skirting: Providing and fixing 18mm gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels Granite of any colour or shade (Area of slab over 0.5 sqm) incl. all carriages complete job.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm incl. all carriages complete job.

Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade incl. all carriages complete job.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement :3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete incl. all carriages complete job.

Providing and fixing antiskid vitrified pavement tiles 300x300x9.8 mm laid on 20mm thick cement mortar 1:4 (1 cement:4 coarse sand) and jointing with tile grout as per approved colour complete as directed by Engineer-in-charge incl. all carriages complete job.

Kota stone slab flooring 25 mm thick over 20mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing, polishing and curing complete with base of cement mortar 1:4 (1 cement : 4 coarse sand) incl. all carriages complete job.

Providing and applying 2 mm thick white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete incl. all carriages complete job.

Wall Painting with acrylic emulsion paint of approved brand and manufacture to give an even shade. Two or more coats on new work complete job incl. all carriages complete job.

Providing and applying Plaster of Paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete incl. all carriages complete job.

Painting wood work with deluxe multi surface paint of required shade. Two or more coats applied @ 0.90litre/10sqm over an under coat of primer applied @ 0.75litre/10sqm of approved brand andmanufacture (doors/windows/ventilators) incl. all carriages complete job.

Applying priming coat With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) incl. all carriages complete job.

Painting steel work with deluxe multi surface paint of required shade to give an even shade. Two or more coats applied @ 0.90litre/10sqm over an under coat of primer applied @ 0.80litre/10sqm of approved brand and manufacture (soffit, eaves boarding) incl. all carriages complete job.

Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with with water proofing cement compound @ 0.253kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm . This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. (The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.) incl. all carriages complete job.

P/F of khatambandi ceiling of ist class budloo wood of specified pattern i/c necessary frame work of 50mm x 75mm size and 12mm thick ply board frame in lining of budloo wood underneath and other incidentals i/c cornice of size 75mmx75mm of budloo wood complete in all respects as per the directions of consultant/drawings enclosed incl. all carriages complete job.

P/F finished hard wood 18mm thick on flooring cut to required shape and laid to required pattern i/c chamfering of the edges as directed by Engineer-in-charge, sample to be approved by engineer-in-charge incl. cost of all material, leads, lifts and carriages etc upto site of work complete.

P/F of 12mm thick planks made of imported wood panelling (new zealand) pine or equivalent for walls i/c cost of necessary adhesive, budloo wood backing and cost of nails, carriages etc complete job.

French spirit polishing, Two or more coats on new works including a coat of wood filler incl. all carriages complete job.

P/F of 50 mm dia stainless steel railing of 304 grade of hollow tube 1.6 mm thick of Jindal/Salem make or equivalent i/c welding and fixing with SS machine screws for making required size and shape, buffing etc complete and fixing SS balusters upto 900 mm height, newel post not less than 1050 mm height and SS tubes three in one installed horizontally incl. all carriages complete job.

P/F of 50 mm dia stainless steel wall mounted hand railing of 304 grade of hollow tube 1.6 mm thick of Jindal/Salem make or equivalent i/c welding and fixing with SS machine screws for making required size and shape, buffing etc complete and fixing SS balusters upto 900 mm height, newel post not less than 1050 mm height and SS tubes three in one installed horizontally incl. all carriages complete job.

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand :6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing incl. all carriages complete job.

Pointing on brick masonry in lime surkhi (1 lime: 1 surkhi) i/c finishing the joints with lime surkhi pigments to give a local heritage touch as per the directions of Consultant /Engineer incharge upto desired height complete in all respects.

P/F dagi devari as per local architectural heritage 100mm x 40mm wooden planks of ist class kailwood fixed horizontally, vertically, inclined with necessary screws and other items (ist class kail wood) incl. all carriages complete job.

Supply and installation of signage plates for rooms, meeting halls etc of size 120mm x 120mm x 1.5mm in SS 304 mat finish having letters engrave in the SS plate in black vinyl steam pressed to get a clean finish and having font size of name atleast 30mm fixed on the wall or door surface with high quality adhesive tape of 3M or equivalent complete incl. all carriages complete job.

Manufacturing supplying and fixing retro reflective overhead signage boards made up of 2mm thick aluminum sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type-III of ASTM-D-4956-01 as approved by Engineer-in-charge; letters, borders etc. as per IRC : 67-2001 in silver white with blue colour background and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class -II of ASTM-D-4956-01 and fixing the same to the plate of structural frame work by means of suitable sized aluminum alloys, rivets or bolts and nuts @ 300mm c/c all along the periphery as well as in two vertical rows along with theft resistant measures including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminum sheet including appropriate priming coat. The rate includes the cost of rounding off the corners, lowering down the structural frame work from the gantry, fixing and erecting the same in position all complete as per drawing, specification and direction of Engineer-in-charge (Structural frame work including M.S. plate to be provided separately. Rectangular area of the sheet only shall be measured for payment). Overhead informatory road signage incl. all carriages complete job.

P/A ornamental molded cementing plaster vertical post (11 feet average height and 450mm dia) with mix of (1 cement : 1 fine sand) i/c material, scaffolding, shuttering etc incl. all carriages complete job.

P/F judge desk 1200 mm high x 2000mm deep (min) made up of 19mm thick ply board for frames, shelves and 12mm thick ply board for drawers with 19mm thick ply board shutters finished top with 1mm thick laminated teak wood on exposed surfaces fixed with adhesive/screws/nails wherever required i/c inside mica on exposed surfaces i/c telescopic channels, drawer knobs, locks and all necessary fittings of ist class quality as required incl. all carriages complete job.

P/F white vitreous china pedistal type water closet ( european type W.C pan) with seat and lid ,4/6 litre low level white flushing cistern ,including flushing pipe ,with manually controlled device with all fittings and fixtures complete ,including cutting and making good the walls and floors wherever required Makes incl. all carriages complete job.: Jaguar/hindware/cera.

P/F water closet squatting pan ( indian type W.C pan ) with 100 MM sand cast iron P or S trap ,10 liter low level white P V C fulishing cistern ,including flush pipe with manually controlled device( handle lever),with all fittings and fixtures complete ,including cutting and making good the walls and floor wherever required incl. all carriages complete job.

P/F white vitreous china flat back or wall corner type lipped front urinal basin with fixing accessories set incl. all carriages complete job.

P/F urinal partition /division plate incl. all carriages complete job.

P/F wash basin with C.I brakets ,15 mm C.P brass centre hole basin mixer ( 01 Nos ) , 32 mm C.P brass waste of standard pattern ( 01 Nos ) pedestal ( 01 Nos ) including painting of fittings and braskets ,cutting and making good the walls wherever required incl. all carriages complete job.. Makes:- jaguar/hindware/cera

P/F stainless stail A ISI 304 ( 18/8) kitchen sink as per IS: 13983 with C.I brasket and stainless steel plug 40 mm ,including painting of fittings and braskets ,cutting and making good the walls wherever required incl. all carriages complete job. : 510x1040 mm BOWL DEPTH250 mm

P/F mirror of superior glass (of approved quality) and of required shape and size with plastic moduled frame of approved make and shade with 6 mm thick hard board backing: rectunguular shape 453x357 mm incl. all carriages complete job.

P/F toilet paper holder with flap made out of C.P brass incl. all carriages complete job.Makes:- jaguar/hindware/cera

P/F C.P brass soap dish :makes :- jaguar/hindware/cera

P/F health faucet with hose pipe for european water colset complete in all respect of approved quality. Makes :- jaguar/hindware/cers

P/F of CP brass towel rail complete with CP brasket fixed to wooden cleats with CP brass secrews .Makes:- jaguar/hindware/cera

P/F CP brass bib cock with auto closing system with built in control cock with wall flange of approved quality 15 mm nominal bore .Makes:- jaguar/hindware/cera

P/F C.P brass angle value for basin mixer and geyser/cister points .Makes :- jaguar/hindware/cera 15 mm nominal bore

P/F C.P brass single lever basin mixer with 450 mm briaded connection pipe. Makes:- jaguar/hindware/cera 15 mm nominal bore

P/F C.P brass bottle trap for wash basin i/c CP waste fittings complete 32mm dia complete in all respects of approved quality. Makes:- Jaquar/Hindware/Cera

P/F C.P brass wall mixer with shower arm Makes:- Jaquar/Hindware/Cera

P/F PP based soil, waste and vent pipes (Silencio as per DIN4109) suitable to rubber ring joints, which i/c bends, rubber ring, jointing, junctions, clean out plug, cowls, offsets, collar, M.S holder-bat clamps, access pieces, trap of self cleansing design etc complete i/c jointing.

110 mm dia. PP SWR socketed pipe with rubber ring joints.

75 mm dia PP SWR socketed pipe with rubber ring joints.

160 mm dia PP SWR socketed pipe with rubber ring joints.

P/F of floor trap 110mm with double crome plated cover one grated and one closed and all the other fittings requried. Make Astral/SFMC/Finolex.

Providing and fixing Polyethylene- Aluminum- Polyethylene (PE-ALPE) Composite Pressure Pipes conforming to IS: 15450, U.V. stabilized with carbon black having thermal stability for hot and cold water supply, capable to withstand temperature upto 80ºC, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. Elbows, tees, reducers, couplers and connectors etc. including cutting and making good the walls.This includes testing of joints complete as per direction of the Engineer-in-charge: Concealed work.

1620 (20 mm OD) pipe

2025 (25 mm OD) pipe

Providing and fixing Polyethylene- Aluminum- Polyethylene (PE-ALPE) Composite Pressure Pipes conforming to IS: 15450, U.V. stabilized with carbon black having thermal stability for hot and cold water supply, capable to withstand temperature upto 80ºC, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. Elbows, tees, reducers, couplers and connectors etc. including cutting and making good the walls.This includes testing of joints complete as per direction of the Engineer-in-charge: Internal work (exposed on wall)

2532 (32 mm OD) pipe

3240 (40 mm OD) pipe

4050 (50 mm OD) pipe

Providing and fixing Polyethylene- Aluminum- Polyethylene (PE-ALPE) Composite Pressure Pipes conforming to IS: 15450, U.V. stabilized with carbon black having thermal stability for hot and cold water supply, capable to withstand temperature upto 80ºC, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. Elbows, tees, reducers, couplers and connectors etc. including cutting and making good the walls.This includes testing of joints complete as per direction of the Engineer-in-charge: Internal work (exposed on wall)

4050 (50 mm OD) pipe

P/F of thermal insulation for hot water lines made out of flexible elastomeric foam of closed cells structure having a thermal conductivity of 0.038W/m K at 200 Deg C water vapour permeability of Cu.m 5000 as requried including accessories i.e adhesives/tape on all joints as per the satisfacation of engineer in charge complete job.

1620 (20 mm OD) pipe

P/F of unplasticised PVC connection pipe with brass unions complete job. 45 cm length 15mm nominal bore.

Cutting holes upto 30x30 cm in walls including making good the same with common burnt clay F.P.S (Non -modular) bricks.

constructing masonary chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 mix (1 cement: 4 coarse sand ) C.I surface box 100x100x75mm inside with hinged cover fixed in cement concrete slab of 1:2:4 mix (1cement: 2coarse sand:4 graded stone aggregate 20mm nominal size) necessery excavation foundation concrete 1:5:10(1cement: 5 fine sand: 10 graded stone aggregates 40mm nominal size) and inside plastering with cement mortar 1:3( 1cement: coarse sand) 12 mm thick finished with a floating coat neat cement complete as per standard design with F.P.S bricks complete job.

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed within a lead of 50 mtrs complete job.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. complete job.

P/F PP based soil, waste vent pipes (silencio as per DIN4109) suitable to rubber ring joints, which include bends, rubber ring, jointing, junction, clean out plug, cowls, offsets, collar, M.S holder-bat clamps access pieces,trap of self cleanising design etc completeing including jointing. for underground swerage system in the existing excavated trench. Make AStral/SMFC/Finolex

110mm dia PP SWR socketed pipe with rubber ring joints.

160mm dia PP SWR socketed pipe with rubber ring joints.

Providing and filling sand of grading zone V or coarser grade all around to composite pipes in external work and laid dry brick over sand layer to protect the pipe complete job.

110mm dia PP SWR socketed pipe with rubber ring joints.

160mm dia PP SWR socketed pipe with rubber ring joints.

Supply and instalation of Gully trap of size 110mm. Make Astral/SFMC/Finolex

Making soakage pit 2.5 m diameter 3.00 m deep with 45x45 cm dry brick honey comb shaft with bricks of class designation 75 and S.W drain pipe 100mm diameter 1.8 long complete as per standard design.

Construction of septic tank of size 5.0mx2.5mx1.4m approx. height(height to be fixed as per site requriment i.e below invert level of last manhole (1.5 m water depth) in B/W 350/230 mm thick(minimum) walls and 400mm.

P/F of full way lever operated forged brass ball valve of brass body with forged brass hard crome plated steel ball tested to a pressure not less than 16kg/sq.cm with threaded flanged joints complete with nuts, bolts, gaskets, washers etc. Make Neu/Honeywell.

50mm diameter

32mm diameter

25mm diameter

P/F on walls 35Ltrs electric gyser with ABS Body complete job. Make Bajaj/Crompton/Racold/Havells/Jaquar/Cera/Hindware.

P/F Track deck CRILL make or equivalent HI rib profiled sheets 1000 to 1020 mm cover width 28-35 mm high crests at 250 to 225 mm TCT (total coated thickness) high tensile S.M.P galvalume steel. The sheets shall have wide panes with 3 no. stiffing ribs incl. all carriages complete job.

Providing ridges or hips of width 60cm overall width plain G.S sheets fixed with polymer coated J or L hooks, bolts and nuts 8mm dia G.I limpet and bitumen washers complete 0.63 mm thick with zinc coating not less than 275 gm/sqm incl. all carriages complete job.

Providing valleys of 90cm wide overall in plain G.S. Sheets fixed with polymer coated J or L hooks, bolts and nuts 8mm dia G.I limpet and bitumen washers complete 1.60 mm thick with zinc coating not less than 350gm/sqm incl. all carriages complete job.

Providing and fixing plain eaves boarding (400 mm x 40mm) first class kail wood fixed with screws etc i/c all carriages complete job.

P/F of 20 mm thick T&G well planned planks for roof soffits & ceiling on wood work in false ceiling, partitions sawn and put up in position of budloo wood (ceiling joists) i/c cost of necessary adhesive & cost of nails etc with necessary cornice of required size complete job all complete as approved by Engineer-in-charge i/c cost of all materials, leads, lifts and carriages etc upto site of work complete .(soffits of Ist class kail wood) as per the directions of consultant/as per the drawings enclosed

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with M20 Grade 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) incl. all carriages complete job.

Centering and shuttering including strutting, propping etc. and removal of form for stairs incl. all carriages complete job.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more incl. all carriages complete job.

Supplying and fixing of following sizes of medium class PVC conduit along with accessories complete incl. cutting and making the walls good wherever required incl. all carriages complete job.

AABID ALI MANTOO

Dar Constructions