REPAIR / MAINT OF CERTAIN ROADS/FOOTPATH BERM IN AREA OF AGE BR-II UNDER GE (WEST) LUCKNOW

Amount

M & L for repair to pot holes any depth not exc. 1 Sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths etc, making good by applying tack coat @ 5 kg per 10 sq m, putting in premixed bituminous macadam, well rammed and sealed with binder 9.8 kg per 10 sq m, blinded with 0.09 cu m of stone chippings, 6.3 mm size and again well rammed (including supply of premixed macadam, binder and chippings). depth of potholes exc 30 mm.all as specified and directed.

M & L for preparing of existing black top surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surface with gunny bags/mechanical air compressor to remove all loose dirt etc all as specified and directed.

M & L for applying evenly a priming/tack coat with bituminous primer on existing black top surfaces at 5 Kg per 10 Sqm with paving bitumen VG-10 grade complete all as spd and directed

M & L for premix bituminous, macadam with 4% by weight of total mix using paving bitumen VG-30 grade, laid/rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) complete all as directed.

M & L Bituminous premix asphaltic semi-dense concrete 30mm consolidated thickness with 5.5% binder (Paving bitumen VG 30) content by weight of total mix, rolled and compacted to required camber complete laid with self propelled mechanical pavers & rolled with 8 to 10 ton power roller & compacted to required camber and gradien complete all as specified and directed by the EIC.

M & L for laying hot applied thermoplastic compound (paint) 2.5mm thick incl reflecting glass beads incl cost of all materials labour machinery, T&P etc required for proper completion of work incl all other charges. The finish surfaces to be uniform and free from streaks and holes as per MORTH specification no. 803 as per IRC. painting lines, dashes, arrows, letters etc on roads, pavements and the like exc 10 cm wide with road marking paint, white or golden yellow all as specified and directed.

S & F of cats eye of size of width not exc 120mm and height not exc 20mm made up of strong engineering polymer thermoplastic polyurethane with electronic welded abrasion resistant lances for retro reflection in dry & wet weather condition along with bituminous adhesive as per MORTH specification.

Demolition of PCC (un-reinforced) in ground floors and pavings not exc. 15 cm thickness below or above ground levels complete all as specified and directed.

M & L hard core of broken stone gauage not exc 63 mm deposited spread and levelled n.exc 15 cm thick watered and rolled /rammed to a true surface all as specified.

M & L cement concrete 75 mm thick 1:3:6 type C-2 using 40 mm graded stone aggregate complete all as specified.

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand including demolition of existing stone slabs and tiles of any description or thickness in floors, aprons etc laid dry or laid dry and pointed complete all as specified and directed.

M & L for PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in roof kerbs, coping, benching etc including weathering slightly rounded or chamfered angles and throating, complete all as specified and directed.

M & L precast cement concrete (saucer drain) 1:2:4 type B-1 using 20mm graded stone agg as in saucer drains (of any section indicated), with plain fair faces, including chamfers, weatherings, throating etc. and setting in CM (1:4) and pointed in CM (1:3) complete with joints to match complete as directed.

M & L Precast cement concrete (kerb stone) type B-1, 1:2:4 (20mm graded stone aggregate), bedded, and jointed in cement mortar 1:4 and pointed in cement mortar 1:3 complete as specified and directed.

M & L for preparation of external surfaces of concrete/kerb stone, facias, cornices etc and applying two coats of weather proof anti-fungal (Apex) paint over a coat of wall care putty and applied as per manufacturer's instructions complete as specified and directed.

S & F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints,fixed to wall including bend ,Tee etc complete all as specified and directed.

M/S AADI ENTERPRISES (BID ID -3469819)

Matrubhoomi Construction (BID ID -3464285)