Repair and renovation of Medical Health Centre at TRT Nagrota Camp Jammu

Amount

Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead :In cement mortar

Providing and fixing 1 mm thick M.S. steel door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.Using M.S. angles 40x40x6mm for diagonal braces

Renewing glass panes, with Putty & Nails wherever necessary: Float glass panes of thickness 4mm

Earth work in excavation by manual means over areas (Exceeding 30 cm and upto 1.5 mtr in depth, 1.5 mtr in width as well as 10 sqm. on plan) including disposal of excavated earth upto 1 mtr from cutting edge, disposed earth to be levelled and neatly dressed in :All kinds of Soil

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level.1:4:8 (1 cement: 4 coarse sand: 8 graded stone aggregate 40mm nominal size) Crushed

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level.1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size) Crushed

15mm Cement plaster on the rough side of single or half brick wall of mix:1 : 6 ( 1 cement : 6 coarse sand)

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands,plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centring, shuttering, finishing and reinforcement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Reinforcement for R.C.C. work including straightening,cutting, bending, placing in position and binding all complete.Thermo-Mechanically Treated bars

Centring and shuttermg including strutting, propping etc and removal of form for

Foundations: footings, bases of columns etc. for mass concrete.

Cement concrete flooring 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete.50 mmthick with 20mm nominal size stone aggregate.Crushed

Repair to C.G.I Sheet roofing by way of plugging of leakage with putty/J/Lhooks with bitument felt washers, G.I Limpet/washers complete wherever required.

Painting on G.S.sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade.Old work (one or more coats)

Providing and fixing G.l. pipes complete with G.l. fittings excluding trenching and refilling etc. (external work) 20 mm dia. Gl pipe

Providing and fixing G.l. pipes complete with G.l. fittings and clamps, including cutting and making good the walls etc.15 mm dia. nominal bore Medium

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead For thickness of tiles 10 mm to 25 mm

Providing and fixing 1st quality ceramic glazed tiles conforming to IS :·13753 of minimum thickness 5 mm of approved make like NITCO, ORIENT, SOMANY KAJARIA, or equivalent make in all colour, shades except begundy, bottle green, black of any size as approved by Eningeerin- Charge in skirting, risers of steps and dados over 12mm thick bed of Cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing wtih grey cement slurry@ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete

Providing and fixing Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 13755 of NITCO,ORIENT, SOMANY,KAJARIA or equivalent make in colour such as White, Ivory, Grey, Fume Red, Brown laid on 20 mm thick bed of Cement Mortar 1: 4 (1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete.

Providing and fixing white vitreous china water closet squatting pan (Indian type) Orissa pattern W.C. pan of size 580x440 mm

Providing and fixing on wall face unplasticised - Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS:5382 leaving 10 mm gap for thermal expansion 110 mm diameter

Providing and fixing on wall face unplasticised- PVC moulded fittings/accessories for unplasticised- Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.110mm Bend

White Vitreous China wash basin size 550x400 mm with single 15 mm C.P. brass pillar taps

Providing and fixing P.V.C low level flushing cistern with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete:10 litre capacity -White

Providing and fixing C.P. brass angle valve for basin mixer and gyser points of approved make conforming to IS :8931 15 mm nominal bore

Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour: Waste coupling 31 mm of 79 mm length and 62 mm breadth weighing not less than 45gms.

Providing and fixing Steel grating 110 mm dia

Providing & fixing PVC floor Traps

Repairs to plaster of thickness 12mm to 20 mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 metres lead With cement mortar 1:4 (1 cement: 4 coarse sand)

Finishing walls with water proofing cement paint of required shade New work (two or more coats) applied @3.84 kg/10 sqm

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:One or more coats on old work.

Painting with ready mixed synthetic enamel paint of approved brand and manufacture in all shades to give an even shade Old steel work (one or more coats)

White washing with lime to give an even shade :Old work (two or more coats)

welding by electric plant including transportation of gas welding at site etc complete.

Strctural steel work welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing and fixing hand rail of approved size by welding etc to steel ladder railing, balcony railing & staircase railirg and similar work including applying a priming coat of approved steel primer.G. I. pipes 40mm nominal bore (class B)

Finishing walls with water proofing cement paint of required shade:Old work Old work (one or more coats applied @ 2.20 kg/10 sqm)

Carriage of material from source to site of work by Mechanical Transport.

Stone aggregate 40mm nominal for 8 Kms

Stone aggregate 20mm nominal for 8 Kms

Sand for 15 (Kms)

Joginder Lal

NIRMAL SINGH