GE 861 EWS-41/2024-25

Amount

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed.

M&L for PCC 1:4:8 type D2, (using 40mm graded crushed stone aggregate) in foundations, filling and mass concrete complete all as specified and directed.

M&L for Reinforced cement concrete (Design Mix, M-25) using 20mm graded crushed stone aggregate in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M&L for Reinforced cement concrete (Design Mix, M-25) using 20mm graded crushed stone aggregate in Columns, pillars, piers, posts and struts complete all as specified and directed.

M&L for Reinforced cement concrete (Design Mix, M-25) using 20mm graded crushed stone aggregate in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

S&F Mild Steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clip complete all as specified and directed.

All as per item No 7 herein before but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed.

M&L for mild steel TMT bar 6mm to 8 mm dia, cut to length bent to shape required including cranking bending spirally for hooping for column, hooking end binding with binding wire and including mild steel wire(annealed) not less than 0.9mm dia complete all as specified and directed.

M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finished surfaces complete all as specified and directed.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams for rough finished surfaces etc complete all as specified and directed.

Formwork to sides of pillars, posts, struts, piers, columns and stanchions for rough finished surfaces complete all as specified and directed.

M&L for Brickwork with sub class ‘B’ bricks, straight or curved on plan exc 6m mean radius with old size bricks built in Cement Mortar (1:6) complete all as specified and directed.

M&L Brickwork with sub class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls with old size bricks built in CM 1:4 complete, in walls all as specified and directed.

M&L for Reinforced cement concrete (Design Mix, M-25) using 20mm graded crushed stone aggregate in slab supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L for Rendering 10mm thick in CM 1:6 on fair faces of brick work or concrete surfaces of wall finished even and smooth without using extra cement complete all as specified and directed.

M&L for Rendering 15mm thick in CM 1:4 using liquid water proofing compound as per manufacturer's instructions on fair faces of brick work or concrete surfaces of wall complete all as specified and directed. Note:- Lequid water proofing compound shall be measured and paid separately under respective item of this schedule.

M&L for preparation of new surfaces of wall and applying three coats of white wash complete all as specified and directed.

M&L for preparation of new surfaces of wall priming with alkali resistant primer and applying two coats of cement based paint complete all as specified and directed.

Supply only Liquid water proofing compound complete all as specified and directed.

M&L for 75mm thick Cement concrete 1:3:6 mix, type C- 2 (using 40mm graded crushed stone aggregate) as in subbase of floor complete all as specified and directed.

M&L for 100mm thick Cement concrete 1:3:6 mix, type C- 2 (using 40mm graded crushed stone aggregate) as in sub base of floor complete all as specified and directed.

M&L for 25mm thick Cement concrete 1:2:4 mix, type B-0 (12.5mm graded crushed stone aggregate) as in floor for levelling course complete all as specified and directed.

M&L Non - skid Ceramic Coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry over and including screed bed or bedding layer of 15 mm thick with cement mortar 1:4 and pointed in white or coloured cement to match complete all as specified and directed.

M&L for Glazed ceramic tiles in vertical surfaces 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry over and including 10 mm thick rendering with CM 1:4 and pointed in white or colour cement to match the colour of tiles complete all as specified and directed.

S&F Steel ventilator with top hung shutter including hinges, steel peg stay complete all as specified and directed.

M & L for 3mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and directed.

M & L for two coats synthetic enamel paint over a coat of red oxide primer on new steel surfaces including preparation of surfaces over 10 cm width or girth complete all as specified and directed.

S&F Mild Steel work as in framed roof trusses, purlins, rails and fastenings including distances pieces, cleats etc conforming to Fe 410 - O or Fe 310-O complete all as specified and directed.

S&F Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheets 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based Plain steel sheets 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F factory made solid PVC door frame of size 50mmx47mm made out of 5 mm wood grain printed PVC sheet with mild steel square tube complete as per manufacturer specification & drawing complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30 mm thick (stiles) consisting of frame made out of mild steel tubes for top & bottom rails. Mild steel frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20 mm with stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side & as gap inserted for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the mild steel frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement fixing in the frame at site as per specification ,drawing complete all as specified and directed.

Supply and fix butt hinges 100MM, medium weight, stainless steel all as specified and directed complete all as specified and directed

Supply and fix 150 mm long aluminium anodised barrel tower bolt of extruded section and fixed complete all as specified and directed.

Supply and fix 150 mm aluminium handle cast type, anodised, complete all as specified and directed

S&F Vitreous China wash down water closet (Squat pattern) white complete excluding flushing cistern and flush pipe "Orissa" pattern size 580x440 with integral footrest inlet connection to trap antisyphonage pipe etc complete including joint between flushing pipe and socket of WC complete all as specified and directed.

S&F 10Ltr PVC valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed.

Supply only Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern etc complete all as specified and directed

Supply & fix vitreous china wash basin, white, flat back, size, 550X400mm including bracket for fixing, including S&F of 32 mm waste coupling, waste pipe etc complete all as specified and directed.

Supply and fix Pillar taps, 15mm bore, fancy type cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'HOT or COLD' with long screwed shanks and fly-nuts, screwed for iron pipe or for connection pipe complete all as specified and directed.

S&F Bib taps of 15mm bore fancy type, chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for brass ferrule complete all as specified and directed.

S&F Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) including connections to flushing pipe and outgoing pipes complete all as specified and directed.

S&F 32 mm bore Waste coupling of PTMT (half or full threaded) suitable for urinal. (Minimum weight 32mm45gms/40mm-60 gms complete all as specified and directed.

S&F Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified and directed.

S&F stop valve of 15mm bore, chromium plated with long shank and cup concealed type cast copper alloy, screwed down, high pressure, with crutch handle, screwed both ends for brass ferrule complete all as specified and directed.

S&F PVC connection 15 mm size PTMT nuts of length 600 mm complete all as specified and directed

S&F soap dish vitreous china white size 160x160x90mm approx complete all as specified and directed.

S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S&F CP tubular towel rail 20mm dia D type 60cm between two flange including bracket complete all as specified and directed.

S&F Brass chromium plated shower rose 125mm size complete all as specified and directed.

S&F 15 mm dia bore steel tubing medium grade galvanised fixed to walls or laid in floors with all fittings and connection complete all as specified and directed.

S&F 20 mm dia bore steel tubing medium grade galvanised fixed to walls with all fittings and connection complete all as specified and directed.

S&F 20mm bore gun metal glove or gate valve with iron wheel head screwed both ends for iron pipe complete all as specified and directed.

S& F 1000 Ltr capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) three layered, hoisted and fixed in position complete all as specified and directed.

S&F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches/fixed to walls or in floors complete all as specified and directed.

S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall, laid in trenches or in floors complete all as specified and directed.

S&F 110mm bore PVC (SWR) bends any radius with access door complete all as specified and directed.

S&F 75mm bore PVC (SWR) bends any radius complete all as specified and directed.

S&F PVC (SWR) junction double, (double T), equal or unequal complete all as specified and as directed.

S&F 110mm PVC (SWR) vent cowl complete all as specified and directed.

M&L 75mm outlet dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

M&L hard core of broken stone or boulders of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 150mm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for 75mm thick Cement concrete 1:3:6 mix, type C-1 (using 20mm graded crushed stone aggregate) as in plinth protection finished even and smooth without using extra cement complete all as specified and directed.

M&L for Setting coat of 3mm thick of CM (1:2), trowelled to even and smooth finish over rendering 15mm thick in CM 1:4 on fair faces of brick work finished surface even & smooth without using extra cement and using lequid water proofing compound @ 2% by weight of cement complete all as specified and directed.

M&L for providing RCC precast cement concrete type B-0 (1:2:4) (using 12.5 mm graded crushed stone aggregate) as in cover slab for manhole and similar article with plain face set in cement mortar (1:4) complete all as specified and directed. Note : Reinforcement shall be paid separately.

M&L for Concrete bed to 150 mm dia drain pipes including packing under and haunching against the sides of pipes after they are laid and tested in PCC 1:3:6 type C2 using 40mm graded stone aggregate all as specified and directed.

M&L for laying RCC pipes class NP-2 with socketed ends laid and jointed complete of 150mm bore complete all as specified and directed.

Construction of 1.2 M dia and 3m depth Soakage well including excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonry in CM 1:4, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size 40mm to 63mm or as directed complete all as specified and directed.

M&L for on site LLDPE septic tank designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, Vent shaft, connection etc., complete for 20 users complete all as specified and directed.

Returning, filling in and including spreading, levelling, watering & well ramming in layers n. exceeding 25 cm in soft/loose soil complete all as specified and directed.

Removing of excavated materials to a distance n. exc 50m and depositing where directed at a level n exc 1.5m above the starting point in oft/loose soil complete all as specified and directed.

Excavating in post holes not exc 0.5 cum, in soft soil and getting out , returning, filling in and ramming earth in layers not exc 25 cm, watering and removing surplus soil to a distance not exc 50 m and making good surfaces complete all as specified and directed.

M & L for PCC 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) as in foundation filling and mass concrete complete all as specified and directed.

S&F MS work as in Post, framed roof trusses, purlins, rails, MS plate and fastenings including distances pieces, cleats, MS plate etc conforming to Fe 410-O or Fe 310-O complete all as specified and directed.

M&L 100MM thick Cement concrete 1:4:8 mix, type D- 2 (using 40mm graded crushed stone aggregate) in sub base complete all as specified and directed.

M&L 75MM thick Cement concrete 1:2:4 mix, type B- 2 (using 40mm graded crushed stone aggregate) in floor complete all as specified and directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. complete all as specified and directed.

Demolition of Cement Concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for 40mm thick plain cement concrete 1:2:4 mix, type B-1 (using 20mm graded crushed stone aggregate) as levelling course complete all as specified and directed.

M&L for Non skid joints free ceramic coloured tiles (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M&L for clean swan Second class hard-wood in scantlings in framed work complete all as specified and directed.

M&L for 6mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one face; fixed with nails to wall of timber frame work complete all as specified and directed.

M&L for 6mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one face; fixed with nails on ceiling on timber frame work complete all as specified and directed.

S&F 2nd Class soft wood plain fillets square rectangular or triangular in section clean sawn fixed with nails sectional area n. exc 3 sqcm complete all as specified and directed.

S&F 2nd Class soft wood plain fillets square rectangular or triangular in section clean sawn fixed with nails sectional area exc 3 but not exc 6 sqcm complete all as specified and directed.

M & L for point wiring for one light point/fan point controlled by one switch with 1.5 sqmm PVC FRLS insulated unsheathed copper conductor single core multi strand flexible cable and 1.5 sqmm PVC FRLS insulated unsheathed copper conductor single core cable (green colour) as earth lead in and including PVC casing and capping medium grade of suitable size run on wall/surface with all fittings (ISI Marked) controlled by one switch including CI/MS/ wooden sunk box of required size, & as directed by Engr in Charge & 3mm thick plastic laminated sheet, including cutting chases to wall making good the disturbed surfaces to match with the existing specification complete all as specified and directed.

Description All as per srl item No-90 here in above but for one 5A socket outlet on the same board controlled by one switch complete all as specified and directed.

Description all as per item No 90 above but for 3 pin socket outlet 15 Amps independent board with 2.5 Sqmm complete all as specified and directed.

S&F switch piano flush type, 05 / 06 Amps single pole, one way 240 volts complete all as specified and directed.

S&F switch socket combination 2 in 1, 3 pin, 5 Amp flush type universal 240 volt complete all as specified and directed.

S&F switch socket combination 2 in 1, 3 pin, 15 Amp flush type universal 240 volt complete all as specified and directed.

Supply & fixing of ceiling rose, 3 phase/PVC/polycarbonate isolated body complete all as specified and directed.

Supply & fixing lamp holder (Angular / Straight), insulated body, with back plate for batten fitting complete all as specified and directed.

Supply and fixing LED lamp 9 W complete all as specified and directed.

S&F decorative ultra slim linear LED 20 Watt 4' long lighting fixture with extruded aluminium heat sink, environment friendly, energy efficient ready to use pack including LED tube complete with inbuilt electronic driver, PCB, connector block etc. including connecting up three copper flexible cable from ceiling rose to fittings including connecting up and fixed on and including two nos PVC square box of required size complete all as specified and directed.

S&F LED Bldg security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all specified and directed.

Supply and fixing sheet metal enclosure double door, single pole and neutral, AC, 240 volts, 8 way, with 200 Amps rated copper bus bar and IP - 43 protection with metal double door and flush to wall including all cutting on wall and making good including two coats of white/colour washing/distempering etc to match the existing disturbed surfaces complete all as specified and directed.

Supply and fixing sheet metal enclosure double door, single pole and neutral, AC, 240 volts, 4 way, with 200 Amps rated copper bus bar and IP - 43 protection with metal double door and flush to wall including all cutting on wall and making good including two coats of white/colour washing/distempering etc to match the existing disturbed surfaces complete all as specified and directed.

Supply and fixing MCB, SP, AC, 240 volts "B" series capacity of 06 to 32 Amps, 10kA and making connections complete all as specified and directed.

Supply & fixing MCB, SPN (Single Pole & Neutral), AC, 240 volts, B series capacity 32 Amps 10kA and making connections complete all as specified and directed.

Supply & fixing MCB, SPN (Single Pole & Neutral), AC, 240 volts, B series capacity 40 Amps to 63 Amps 10kA and making connections complete all as specified and directed.

Material & labour for earthing complete with galvanised mild steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level steel earth plate connected with GI wire 04mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15mm bore light grade all as shown in elect plate No.3 of SSR part I connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipe medium grade 20mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover in PCC 1:2:4 type B1 duly reinforced with and including MS Bars 6mm dia at the rate of 150mm centre to centre both ways with suitable lifting handle and pit / chamber in PCC 1:3:6 type C1, Angle iron 40x40x5mm frame for pit cover including testing on completion complete all as specified and directed.

Supply and Fixing exhaust fan 300 mm sweep PVC body with louver, 240 volts AC single phase, 50 Hz, ISI marked, including necessary work in wall/sheet, including connection cable, nut bolt and other fixing material complete all as specified and directed.

Supply and install water heater vertical type, stationary storage type of 25 ltr capacity having S/S inner vessel, five star rating , ISI Marked close/vented type (star marked), 240 volts with heating element and auto cut thermostat, maximum output of hot water is 60 degree celsius, including fixing arrangement nut bolts, washer/fasteners and making good as per existing surface complete all as specified and directed.

Supply and laying or fixing or passing through pipe or binding with fencing/pole etc, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 10 Sq mm nominal cross section 2 core solid conductor complete all as specified and directed.

S&F GI tubing 20mm medium grade galvanised laid in tranches & floor including all fittings complete all as specified and directed.

S&F GI tubing 25mm medium grade galvanised laid in tranches & floor including all fittings complete all as specified and directed.

M&L for cutting and tapping 80 mm dia cast iron pipes/water mains for making connections/branch line or for insertion of new tees, branches, etc. of suitable size with necessary fittings complete all as specified and directed.

M/S BILAL AHMAD BHAT (BID ID -3123622)