REPAIR/REPLACEMENT OF LT PANELS/ MCCBs/ CABLE AND CONNECTED ITEMS UNDER GE NASIRABAD

Amount

Dismantling old unserviceable bus bar any size and capacity of any size complete all as specified and directed.

Dismantling cable protection pipe 40/50/80/100 mm dia. complete all as specified and directed.

Taking out old unserviceable UG cable of any size and coreof any size complete all as specified and directed.

Supply, laying, jointing and testing of cable in trenches or fixed to wall/pole or passing through pipe cable LT 1100 volts grade heavy duty, XLPE/PVC insulated , armoured heavy duty electric cable , with aluminium conductor of size 16 Sq mm 4 core.complete all as specified & directed. Note :- Excavation, earth work, sand cushioning and cable cover will be measured and paid separately.

All as per descrition of serial item No 4.00 here-in-before but size 35 Sq mm 4 core.

All as per descrition of serial item No 4.00 here-in-before but size 25 Sq mm 4 core.

All as per descrition of serial item No 4.00 here-in-before but size 70 Sq mm 3.5 core.

All as per descrition of serial item No 4.00 here-in-before but size 50 Sq mm 3.5 core.

All as per descrition of serial item No 4.00 here-in-before but size 120 Sq mm 3 core.

All as per descrition of serial item No 4.00 here-in-before but size 95 Sq mm 3 core.

Excavation in trenches in any type of soil, not exceeding 1.5 metre deep and not exceeding 1.5 metre wide for laying of cables, RCC/Steel tubular poles/stays and struts etc. and getting out including trimming sides and forming bottom surface, complete all as specified and directed.

Returning, filling in including spreading, leveling, watering and well ramming excavated soil in layers not exceeding 25 cm thick each layer as in backfill in trenches after cables have been laid and tested, poles, stays , struts have been erected and tested, complete all as specified and directed.

Removal of excavated soil/ material to a distance not exc 50 metre and depositing where directed at a level not exc 1.50 metre above the starting point complete all as specified and directed.

M & L for old size sub class 'B’ bricks s as in cable cover, laid flat adjoining to each other width wise for protection of cables in trenches, complete all as specified and directed.

M&L for sand cushioning to PVC/ XLPE cables with river sand and punning to provide required cover to UG cables, complete all as specified and directed. Note - For the purpose of payment only punned thickness will be measured

M & L for carrying out boring under the black top road for crossing of LT cable/protection pipe by any means boring machine or otherwise without damaging black top surface of road for fixing of GI pipe 80/100mm bore under the road complete all as specified and directed.

S&F 40 mm GI tubing light grade with all fittings as required for passing cables under floors, along the wall or along the pole, etc with suitable size M.S.flat iron clamps including nut, bolt and washer including taking down old rusted pipe.

All as per descrition of serail item No. 17.00 here-in-before but 50mm dia pipe

All as per descrition of serail item No. 17.00 here-in-before but 80mm dia pipe

M&L for earthing complete with galvanized steei earth plate electrode 60cm X 60cmx 6-7mm thick, burried directly in ground (earth pit not less than 2.25 metre deep below normal ground level) with top edge of plate not less than 1.5 metre below normal ground level and connected to galvanized strip 32 X 6mm by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No 3 of SSR Part-I, connected to OH conductor on pole/ Panel/ main switch board etc all as specified or indicated and testing on completion including provision galvanized strip protected by 40 mm bore, light grade pipe and watering pipe shall be 20 mm ’bore medium grade GI pipe including excavation & earth work, PCC pit with RCC cover, charcoal, salt, funnel, GI strip and protection pipe upto 7.5 mtr complete all as specified and directed.

NOTES FOR SERAIL ITEM Nos. 20.00 AND 21.00 (i) Rates are deemed to be inclusive of PCC platform of suitable size and 45cm height and 4 Nos legs of 50mmx50mmx6mm and 60 cm in height for fixing the panel (ii) Make of MCCB :-L&T,L egrand, Schneider, seimens, C&S (iii) Make :-Universal/Standard/Havells /L&T (iv) Danger notice plate (02 Nos) in Hindi and English of size 20cmx 15cm shall be fixed on the panel (v) Contractor provided power coated finish paint on panel and test certificate /CPRI Approval certificate.

S&F MCCB, 200 Amp, 4 Pole, 35 KA, 415 V, thermal magnetic release type, Ics=100 % Icu, with adjustable overload setting and adjustable short circuit setting , including spreader terminals and phase barriers including taking down old unserviceable MCCB complete all as specified and directed. Make- Legrand/L&T/Siemens/Havells

S&F MCCB, 250 Amp, 4 Pole, 35 KA, 415 V, thermal magnetic release type, Ics=100 % Icu, with adjustable overload setting and adjustable short circuit setting , including spreader terminals and phase barriers including taking down old unserviceable MCCB complete all as specified and directed. Make- Legrand/L&T/Siemens/Havells

S&F MCCB, 160 Amp, 4 Pole, 25 KA, 415 V, thermal magnetic release type, Ics=100 % Icu, with adjustable overload setting and adjustable short circuit setting , including spreader terminals and phase barriers including taking down old unserviceable MCCB complete all as specified and directed. Make- Legrand/L&T/Siemens/Havells

S&F MCCB, 100 Amp, 4 Pole, 25 KA, 415 V, thermal magnetic release type, Ics=100 % Icu, with adjustable overload setting and adjustable short circuit setting , including spreader terminals and phase barriers including taking down old unserviceable MCCB complete all as specified and directed. Make- Legrand/L&T/Siemens/Havells

S&F MCCB, 63 Amp, 4 Pole, 35 KA, 415 V, thermal magnetic release type, Ics=100 % Icu, with adjustable overload setting and adjustable short circuit setting , including spreader terminals and phase barriers including taking down old unserviceable MCCB complete all as specified and directed. Make- Legrand/L&T/Siemens/Havells

S&F MCCB, 25 Amp, 4 Pole, 35 KA, 415 V, thermal magnetic release type, Ics=100 % Icu, with adjustable overload setting and adjustable short circuit setting , including spreader terminals and phase barriers including taking down old unserviceable MCCB complete all as specified and directed. Make- Legrand/L&T/Siemens/Havells

S&F Aluminium busbar of 400 Amps complete with procelain busbar insulator including taking down old unserviceable busbar complete all as specified & directed.

S&F Aluminium busbar of 200 Amps complete with procelain busbar insulator including taking down old unserviceable busbar complete all as specified & directed.

S&F Aluminium busbar of 100 Amps complete with procelain busbar insulator including taking down old unserviceable busbar complete all as specified & directed.

S&F Aluminium lugs thimple/bottle type of 240 to 400 sqmm including taking down old unserviceable lugs complete all as specified & directed. complete all as specified and directed by Engr-in-Charge.

S&F Aluminium lugs thimple/bottle type of 95 to 185 sqmm including taking down old unserviceable lugs complete all as specified & directed. complete all as specified and directed by Engr-in-Charge.

S&F Aluminium lugs thimple/bottle type of 35 to 70 sqmm including taking down old unserviceable lugs complete all as specified & directed. complete all as specified and directed by Engr-in-Charge.

S&F Aluminium lugs thimple/bottle type of 35 to 70 sqmm including taking down old unserviceable lugs complete all as specified & directed. complete all as specified and directed by Engr-in-Charge.

S&F Aluminium lugs thimple/bottle type of 10 to 25 sqmm including taking down old unserviceable lugs complete all as specified & directed. complete all as specified and directed by Engr-in-Charge.

Taking out old unserviceable indicating lamp and S&F R Phase LED indicating lamp complete all as specified and directed by Engr-in-Charge.

Taking out old unserviceable indicating lamp and S&F Y Phase LED indicating lamp complete as specified and directed by Engr-in-Charge.

Taking out old unserviceable indicating lamp and S&F B Phase LED indicating lamp complete as specified and directed by Engr-in-Charge.

PD GUPTA AND COMPANY

ELITE WORKS

DEMROT ELECTRICAL WORKS