Constt. of one additional room at GPS Tuker

Amount

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 min width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides andramming of bottoms lift upto 1.5 m, including getting out excavated earth for 1 m and disposal of surplus excavated earth asdirected

Providing and laying in position cement concrete of specified grade including curing butexcluding the cost of centring and shuttering. All work upto plinth level with:1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) Including all lead, lift and Cariages complete item

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)incl all leads, lifts and carriage complete.

Brick work with common Burnt clay (non modular) bricks of class designation 7.5in foundation and plinth including curing in cement mortar 1:6 mix. Including all lead, lift and Cariages complete item

Extra for brick work with common burnt clay Modular clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level. Including all lead, lift and Cariages complete item

P/Laying Reinforced cement concrete in (1:1.5:3 Mix) (1:cement : 1.5 course sand : 3 stone agg 20mm nominal size) including curing but excluding the cost of centering and shuutering finishing and reinforcement. All work upto Plinth level. Including all lead, lift and Cariages complete item

Steel Reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete. Including all lead, lift and Cariages complete item

P/laying damp proof course 40mm thick with cement concrete (1:2:4) (1 cement : 2 course sand: 4 graded stone agg. 12.5 mm nominal size) and curing complete. Including all lead, lift and Cariages complete item

Making Plinth Protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone agg. 20 mm n/size) over 75mm bed of dry brick ballast 40mm n/size well rammed and consolidated and grouted with fine sand including finishing the top smooth. including all lead, lift and carriages complete item

Filling available excavated earth in trenches including all lead, lift and carriage complete item

supplying and filling in plinth with fine sand under floor including watering, ramming, consolidating and dressing including all lead, lift and carriage complete.

12mm Cement plaster of mix: 1 : 6( 1 cement : 6 fine sand) Including all leads, lifts and Cariages complete.

15mm Cement plaster of mix: 1 : 6( 1 cement : 6 fine sand) Including all leads, lifts and Cariages complete.

6mm Cement plaster of mix: 1 : 6( 1 cement : 6 fine sand) Including all leads, lifts and Cariages complete.

Centering and shuttering including strutting, propping etc. and removal of form for:Foundations, footings, bases of columns etc. for mass concrete. Including all lead, lift and Cariages complete item

Foundation and footing

Suspended floor and roof

Column

Edges of slab below 20cm

Providing wood frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length. Sal wood (including all lead, lift, and carriage complete)

Providing and fixing Panelled or panelled glazed shutters (35mm) for doors, windows and clerestory windows including ISI marked M.S pressed butt hinges bright finished of required size with necessary screws excluding pannelling which will be paid seperatly. 2nd class deodar. including all lead, lift and carriage complete item.

Providing and fixing Panelling or panneling and glazing in panneled and glazed shutters for doors, windows and clerestory window ( Area of opening for panel inserts excluding portion inside grooves or rebates to be measuresd). Panelling for Panelled or Panelled and glazed shutters 25mm to 40mm thick. Particle board 12mm thick. Plain particle board flat pressed, 3 layer or graded wood particle board medium density grade I, IS:3087 marked including all lead, lift and carriage complete item.

Providing and fixing Panelling or panelling and galzing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for Panelled or paneled and glazed shutters 25mm to 40 mm thick. float glass panes 4mm thick glass panes. including all lead, lift and carriage complete item.

Providing and fixing panelling or panelling and glazing in panelled or panelled and galzed shuters for doors and windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebates to be measured ). Panelling or panelled and glazed shutters 25mm to 40mm thick. Fly proof stainless steel grade 304 wire gauze & 1.4mm wise aperture with matching wood breeding. including all lead, lift and carriage complete item.

Painting steel work with deluxe multi surface paint of required shade to give an even shade. Two or more coats applied @0.90litre/10sqm over an under coat of primer applied @0.80litre/10sqm of approved brand and manufacture.

Painting wood work with deluxe multi surface paint of required shade. Two or more coat applied @0.90lit/10sqm over an under coat of primer applied @0.75litre/10sqm of approved brand and manufacture.

White washing with lime to give an even shade. New work(three or more coat)

colour washing such as green blur, buff to give an even shade.

Providing and fixing M.S Grill of required pattern in frames of windows etc. with MS flats. Square or round bars etc. including priming coat with approved steel primes all complete.fixed to opening / wooden frames with rawl plugs screws etc.

Anodised aluminium handles 125mm with plate 175X40mm

Anodised aluminium handles 75mm with plate 118X33mm

Anodised aluminium tower bolt (barrel type) 200X10mm

Anodised aluminium tower bolt (barrel type) 100X10mm

Anodised aluminium sliding door bolt 300X16mm

Oxidised mild steel hooks and eyes 100mm

wiring for light point, fan point, exaust point, call bell point with 1.5sqmm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC condult with modular switch, modular plate, suitable GI box and earthing the point with 1.5sqmm. FRLS PVC insulated cooper.

Wiring for curcuit, submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated cooper conductor, singlr core cable in surface / recessed medium class PVC condult as required. (2X2.5sqmm+1X2.5sqmm earth wire)

Supplying and fixing suitable size GI box with modular plate and cover in front of surface or in recess including providing and fixing 6pin 5/6&15/16 A modular socket outlet and 15/16 A modular switch connection etc. as required

supply of LED Batten 18W

Supply of ceiling fans 230v 50Hz ceiling fan with doublr ball bearing with low power consumption of following sweeps (1400mm ceiling fan)

supplying and fixing square core aluminium cable as required.

Providing and fixing CIB of approved size by way of making foundation in M10, Brickwork in 1:6 cement mortar including plastering with 1:4 cement mortar, painting and writings as per the directions of engineer incharge including all carriages , supply , complete job.

sanjeev singh govt contractor

NARINDER SINGH GOVT CONTRACTOR