REPLACEMENT OF OLD, CONVENTIONAL TYPE FITTINGS WITH LED FITTINGS AND EXISTING FANS WITH BLDC FANS IN UT STATE GUEST HOUSE, SECTOR-6, CHANDIGARH.

DSR Item No.1.21 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

DSR Item No. 1.17 Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.

3 x 1.5 sq. mm

3 x 2.5 sq. mm

DSR item No.15.16 Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required.

63 mm dia (OD-63 mm & ID-51 mm nominal)

Supply and laying of XLPE insulated PVC sheathed Aluminum conductor cable of 1.1 KV grade as per IS 7098 (Part-I) 1988 (amended up to date) of the following sizes to be laid in existing RCC/Hume/DWC/ Metal pipe. (As per Complete Item No. 4 of the DNIT).

Size 10 Sq.mm 4 Core XLPE Al. Arm. Cond. Cable

DSR item no.8.9.5 LED Batten light (System lumen efficacy ≥105 <120 lm/Watt) Supplying, installation, Testing & Commissioning of LED surface mounted Batten light of following body material and construction as per IS : 10322 with driver (Replaceable) as per the requirement with Driver efficiency >85%,(As per Complete Item No. 5 of the DNIT).

S/I/T/C of 2x18/20Watt. LED box type fittings made of CRCA Sheet with LED tube rods. The fittings should be installed on existing surface. The LED tube rod should be of Philips / Wipro / Bajaj / Trilux / Jaquar/ Havells/ Crompton/ Panasonic make of polycarbonate material only.(As per Complete Item No. 6 of the DNIT).

DSR item no. 8.6.10 LED Panel light 2x2 ft. (System lumen efficacy ≥105 <120 lm/Watt) Supplying, installation, Testing & Commissioning of Panel light 2x2 ft., of following body material and construction as per IS : 10322 with driver as per the requirement with Driver efficiency >85%, Operating voltage AC 140-270 Volt, freq 50/60 hz,(As per Complete Item No. 7 of the DNIT).

DSR item no. 8.7.10 LED Panel light 2x2 ft. (System lumen efficacy ≥120 <135 lm/Watt) Supplying, installation, Testing & Commissioning of Panel light 2x2 ft., of following body material and construction as per IS : 10322 with driver as per the requirement with Driver efficiency >85%, Operating voltage AC 140-270 Volt, freq 50/60 hz, (As per Complete Item No. 8 of the DNIT).

DSR item No.8.2 LED Down lighter (SMD Type) (System lumen efficacy ≥120 <135lm/Watt) Supplying, installation, Testing & Commissioning of LED Recessed /surface Down lighter (Round / square/ Rectangular) SMD type of following body material with PMMA and prismatic diffuser and construction as per IS : 10322 with driver as per the requirement with Driver efficiency >85%,(As per Complete Item No. 9 of the DNIT).

S/E of LED Bulk Head Luminaries weather proof frosted light with PMMA / PC reflector and silicon gasket to be installed on surface. The LED fitting should have minimum system Lumen output minimum 1000 Lumen and the driver of the fitting should be workable on 140-260 Volt. (As per Complete Item No. 10 of the DNIT).

Supply, erection, testing and commissioning of LED strip 50 mtr. long having the wattage of 5 watt per meter, Color temperature 3000K Outdoor type IP 65 with LED connector to be installed along the parapet and boundary with the help of ladder if required which shall be arranged by the firm at his own cost.(As per Complete Item No. 11 of the DNIT).

S/E of LED 8W/ 9 W. bollard fitting. The bollard should be approximately (800 mm long and 200 mm wide) from the top of the fitting. The bollard should be made out of extruded aluminium profile and die cast aluminium base with PMMA/ Opal diffuser bollard painted with superior quality of paint.(As per Complete Item No. 12 of the DNIT).

S/E of steel pole made out of galvanized mild steel tubes having 114 mm dia at bottom and 60/75 mm dia at top with cast alum. Embellishments. The poles are primer coated and painted with polyurethane paint of 3 Mtr. Height of Twinkle make LUXMAX-SP-114-302/ May fair MFMD-109 or its equivalent make Bajaj/ K-LITE/ HOMDEC/ Valmont/ Kesslec only.(As per Complete Item No. 13 of the DNIT).

Supply and Erection of LED Track Light fitting 20 Watt. to be installed on the track. The job includes the cost of testing, commissioning and making connection with 3x1.5 sq. mm. copper wire from adjacent light point,(As per Complete Item No. 14 of the DNIT).

Supply and erection of Aluminum Track Single Phase 1 Mtr. for Installation of LED Track Light Fitting. The job includes the cost of all the petty material required to complete the job to the entire satisfaction of Engineer-in-charge. The track should be of same make as that of LED track light fitting

Supply and Erection of LED Post Top Lantern fittings made of cast aluminium housing with power to be mounted on directly on inbuilt Heat sinks. A UV stabilized PC/PMMA diffuser is provided for Glare Free Lighting with high visual comfort to complete with Electronic LED Driver Power supply & related accessories with the following specifications to be installed on existing pole.(As per Complete Item No. 16 of the DNIT).

DSR item No.9.2.4 Brush Less Direct Current (BLDC) Fan without Remote Supply, Installation, Testing and Commissioning of ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. metal (Aluminium alloy) blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, (As per Complete Item No. 17 of the DNIT).

1400mm, service value ≥ 6.0 CM/Min/Watt, air delivery 245 CM/Min (Minimum)

Please Enable Macros to View BoQ information