Repair and Renovation works to the Sri Vivekananda Matriculation School and St.Pauls Nursery and Primary School Buildings at Analmin Nagar

Providing two legged scaffolding for works above 3m height, using 13 to 15 cm dia casuarina props to a distance between the two rows are being 1.25m and the spacing of posts being 2m in both the rows with horizontal posts with 0.50m overlap on either side and braces at 2m c/c including longitudinal and transverse middle braces to step up and providing a platform with country wood planks of 40mm thick and 1m width etc., including cost of all materials, labours, lead, lift, safety measures, etc. complete.

Dismantling the existing damaged RCC for the required width & depth as per the instructions of engineer in charge and disposing the debris 1km away from the site including cost of all materials, labours, lead, lift, curing, etc. complete.

Chipping the damaged tiles including cost of labour for dismantling and disposed away from the site lead lift etc., complete.

Clean removal of cracked cement plaster from walls including cost of all materials, labour, lead, lift, curing, etc., complete.

Providing centering and shuttering using steel structures & props 10 to 13cm dia, including cost of all materials, labours, lead, lift, etc. complete.

Providing RCC 1:11/2:3 using OP/PP cement with 12mm to 20mm machine crushed HBG metal including cost of all materials, labours, lead, lift, curing, etc. complete - excluding cost of reinforcement and form work.

Supplying, Cutting, bending & tying in position steel reinforcement wherever necessary using GI weld mesh of size 75 x 50 mm 10 gauge to the existing concrete surface prepared as per specification including transporting, fabricating bending & tying in position as per the engineer at site including cost of all materials, labours, lead, lift, etc. complete.

Supplying & Providing RTS/ MS rod including cutting, bending, tying and fixing in position as per specification including binding wires, cost of all materials, labours, lead, lift, etc. complete.

Painting one coat of Nitozinc primer (or) equivalent mixed with Hardener in the ratio 3:1 after thorough cleaning the rust in the old reinforcement rods including cost of all materials, lead, lift, tools, etc., complete.

Brick work in CM 1:5 using fly ash bricks including cost of all materials, Labours, lead, curing, etc. complete.

Plastering with CM 1:3, 10mm thick for concrete surface including cost of all materials, labour, lead, lift, curing etc. complete.

Plastering with CM 1:5, 12mm thick for brick wall surface including cost of all materials, labours, lead, lift, curing, etc., complete.

Supply and fixing floor tiles of 305x305x6 mm first quality design ceramic tiles of approved colours in CM 1:3, 20mm thick and pointing with white cement 0.4 kg/Sqm including cost of all tiles, labour, lead, lift, curing etc., complete.

Providing dadooing wall with glazed tiles of approved make first quality printed design and colour of 150x150x6 mm thick laid in CM 1:2, 10mm thick and pointing with white cement of 0.4 Kg/ Sqm including cost of materials labour, lead, lift, curing etc., complete.

Supplying and fixing Porcelain urinal approved quality, including cost of all materials, labours, lead, lift, curing, etc. complete

Providing and fixing steel door of required size with single leaf, frame using 30 x 30 x 5mm M.S angle shutters with 30 x 20 x 3mm M.S angle and flat 4 x 5mm for door stiffener center portion 20 x 5mm for shutter stiffener horizontal and 16x5mm for door stiffener outer vertical and horizontal with 2mm thick M.S Sheet both sides made with 2 no tower bolt, 1 no aldrop, 2 no handles, 3 nos hinges with cost of all materials labour, lead, lift etc., complete including two coats of approved quality enamel paint over the one coat of red oxide primer.

Dismantling the damaged Terrace tiles and disposed away from the site as directed by the engineer in charge including cost of labour, Lead lift, T & P etc., complete.

Providing Terrace tiles of single 200 x 200 x 20mm tiles using CM 1:3, mixed with crude oil 1% by weight of cement and pointing with same oiled mortar etc., including cost of all materials, lead, labours, lift curing etc., complete.

White washing two coats with shell lime including cost of all materials, labours, lead, lift, scaffolding, curing, etc. complete.

Colour washing Two coats without primer including cost of all materials, colour pigments, Fevicol, Labour, lead, scaffolding, curing, lift, etc., complete.

Painting two coats with ready mixed enamel paint for the old steel doors, windows including cost of all materials, through cleaning of surface, labours, lead, lift curing, etc. complete.

Painting two coats with ready mixed enamel paint for the old wooden doors, windows including cost of all materials, through cleaning of surface, labours, lead, lift curing, etc. complete.

Supplying, laying and jointing 50mm dia. PVC pipes of 10 kg/cm2 of approved best quality conforming to I.S.S. and with I.S.I mark, including cutting and fixing with PVC specials and fixing to wall with necessary teakwood plugs, PVC clamps and screws making grooves the dismantled portions to original condition with necessary brick work and plastering wherever necessary with necessary scaffolding charges including cost of all materials, labour, lead, lift, T & P etc., complete.

Supplying laying and jointing in position of 25 mm & 20 mm dia GI pipes ('B' Class) as instructed by the site Engineer rate, including cost of all materials, labour, lead, lift, with necessary scaffolding etc., complete a) 25 mm dia

20 mm dia

NSR AND COMPANY