Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹49.7 LAccepted-AOC B 134 GANESH MURTHI NAGAR PART III COLABA MUMBAI 400 005 | MUMBAI | MAHARASHTRA | 400005 | L1 | Accepted-AOC Being lowest | |
| 2 | L2₹53.8 L+₹3.3 L (6.59%)Rejected-Finance 385 GROUND FLOOR GANESH MURTI NAGAR CAPTAIN PRAKASH PETHE MARG BACKBAY BUS DEPOT CUFFE PARADE COLABA MUMBAI 400 005 | MUMBAI | MAHARASHTRA | 400005 | L2 | Rejected-Finance Other than being lowest | |
| 3 | L3₹54.0 L+₹3.6 L (7.07%)Rejected-Finance NO 943 0 56 VILL PO PATHRERI TEH KOTPUTLI DIST JAIPUR RAJASTHAN 303 107 | JAIPUR | RAJASTHAN | 303107 | L3 | Rejected-Finance Other than being lowest | |
| 4 | L4₹54.8 L+₹4.3 L (8.54%)Rejected-Finance SHOP NO 10 BMC SHOPPING CENTRE MITHA NAGAR GOREGAON WEST MUMBAI 400 104 | MUMBAI | MUMBAI SUBURBAN | MAHARASHTRA | 400104 | L4 | Rejected-Finance Other than being lowest | |
| 5 | L5₹55.4 L+₹4.9 L (9.69%)Rejected-Finance | L5 | Rejected-Finance Other than being lowest |
Tender Value
₹80 L
EMD Value
₹1.4 L
Closing Date
6 Mar 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE (NW) Mumbai
Commander Works Engineer NW Dr Homi Bhabha Road Navy Nagar Colaba Mumbai 05
CERTAIN REPAIRS TO HARDSTANDING PATH DRAIN ROOF CHAJJAS PARAPETS AND CERTAIN MISC WORKS AT BSQ NPO INDA ANGRE AND HQ WNC AND OTHER AREAS UNDER AGE BRII UNDER GE NW KUNJALI, COLABA MUMBAI
2024_MES_641479_1
8316/CWE(NW)MUMBAI/E8
Open Tender
Civil Works
Item Rate
180 days
GE (NW) Kunjali
As per tender documents
7 documents required · 7 mandatory
₹1,000
Yes
GE (NW) Kunjali
₹1.4 L
Yes
28 Mar 2024
8 Feb 2024
8 Mar 2024
8 Feb 2024
6 Mar 2024
29 Feb 2024
8 Feb 2024 - 28 Feb 2024
Amount
Demolition of brick work or stone/boulder masonry, built in cement mortar, including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stone work & precast concrete articles including copings etc.and removing debris outside MD land complete all as specified and directed by the Engr-in- Charge. Note: The place of disposal shall be find out by the contractor.
Demolition of RCC of any description and in any position not otherwise specifically provided for including reinforcement cut as required to facilitate demolition and separating, scraping and cleaning of reinforcement and removing debris outside MD land complete all as specified and directed by the Engr-in- Charge.
Taking down cement plaster of any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc and removing debris outside MD land complete all as specified and directed by the Engr-in- Charge. Note: The place of disposal shall be find out by the contractor.
Demolition of cement concrete (un-reinforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level) and removal of debris out of MD land complete all as specified and directed by the Engr-in- Charge. Note: The place of disposal shall be find out by the contractor.
Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified.
Dismantling of fencing, wire mesh of any type, and in any position by unscrewing nuts, fillets, clamps complete all as specified and directed by the Engr-in- Charge.
Material & Labour for walling of Random rubble masonry uncoursed, well bonded and solidly hearted built in CM 1:6 complete all as specified and directed by Engineer-in-Charge.
'Ditto- all as per item No 7.00 above but except stone complete all as specified and directed by the Engr-in- Charge.
Extra over stone walling built in granite or trap stone, for hammer dressing to face stones with maximum depression on face from straight edge held against the dressed surface n. exc. 40 mm and dressing of face beds and joints, as specified, of random rubble walling, uncoursed or brought up to courses. complete all as specified and directed by Engineer-in-Charge.
Material & Labour for raised pointing in CM 1:4 to RR masonry uncoursed or brought upto courses complete all as specified and directed by Engineer-in-Charge.
Material & Labour for PCC 1:2:4 type B2 ( using 40 mm graded stone aggregate) as in surface channels and drains complete all as specified and directed by Engineer-in-Charge.
Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms, moulds mitered/stopped ends, etc complete all as specified and directed by Engineer-in-Charge.
Demolition and breaking up drain pipes (Salt glazed ware, AC or reinforced concrete) 150 mm bore (internal dia of pipe) set in cement mortar complete all as specified and directed by the Engr-in- Charge.
Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) 200 mm bore (Internal dia of pipe) set in cement mortar complete all as specified and directed by the Engr-in- Charge.
Demolition and breaking up drain pipes (Salt glazed ware, AC or reinforced concrete) 300 mm bore (internal dia of pipe) set in complete all as specified and directed by the Engr-in- Charge.
Material & Labour for 150 mm bore grade 'A' (Internal diameter of pipe in mm) salt glazed stoneware drain pipes laid in trenches and jointed complete all as specified and directed by the Engr-in- Charge.
Material & Labour for 150 mm bore (Bore of pipe in mm) reinforced concrete pipes, class NP-2 laid and jointed with collars complete all as specified and directed by the Engr-in- Charge.
Material & Labour for 300 mm bore (Bore of pipe in mm) reinforced concrete pipes, class NP-2 laid and jointed complete with collars complete all as specified and directed by the Engr-in- Charge.
Material & Labour for 200 mm bore (Bore of pipe in mm) reinforced concrete pipes, class NP-2 laid and jointed complete with collars complete all as specified and directed by the Engr-in- Charge.
Material & Labour for plain cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in foundations, filling and mass concrete, pot holes complete all as specified and directed by the Engr-in- Charge.
Taking down eaves gutters and PVC rainwater pipes (any size or pattern) including all fittings, heads, shoes, bends, swan necks etc including cleaning or refixing or removal to store complete all as specified and directed by the Engr-in- Charge. (measured overall as fixed along the centre line over fittings and accessories).
Supply & Fixing 160 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls, ceilings or in floor etc with and including fixing clips bends elbow, shoes bends complete all as specified and directed by the Engr-in- Charge. Note :- Measurement shall be taken along the centre line of the pipes.
Supply & Fixing 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including fixing clips, bends, elbows, shoes complete all as specified and directed by the Engr-in- Charge. Note :- Measurement shall be taken along the centre line of the pipes.
Supply & Fixing 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including fixing clips, bends, elbows, shoes complete all as specified and directed by the Engr-in- Charge. Note :- Measurement shall be taken along the centre line of the pipes.
Material & Labour for brick work with sub class B bricks straight or curved on plan exceeding 6 m mean radius built in CM 1:6 complete all as specified and directed by the Engr-in- Charge.
'Ditto- all as per item No 25.00 above but except Bricks complete all as specified and directed by the Engr-in- Charge.
Material & Labour for rendering 15mm thick in CM 1:4 on fair faces of brick surfaces and finished even and smooth (without using extra cement) complete all as specified and directed by the Engr-in- Charge.
Material & Labour for preparation of new plastered surfaces of wall, soffits, facia roof and applying two coats of weeather proof acrylic base paint (100 % acrylic) over one coat of self primer including necessayy formwork and safety measures complete all as specified and as directed by Engr in-Charge
Material & Labour for preparation of old decorated surfaces of walls, soffits, roof facia & applying one coat of weather proof acrylic based paint (100% acrylic) including necessayy formwork and safety measures complete all as specified and as directed by Engr in-Charge
Material & Labour for PCC 1:2:4 type B-1 (using 20 mm graded aggregate) as in coping, apex stones, bed plates etc including weathering slightly rounded or chamfered angles and throating and form work complete all as specified and directed by the Engr-in- Charge.
Material & Labour for mild steel framed work such as grills, gratings,chequred plates etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar; barred iron doors; ladder; framed balusters; walkj ways, railings, frame work for water tanks and similar work conforming to Fe 290 Gd E-165 complete all as specified and directed by the Engr-in- Charge.
Supply only galvanised iron chain link fencing of size 100mm x 100mm mesh and 10 mm gauge complete all as specified and directed by the Engr-in- Charge.
Fixing only chain link fencing including line wires, any mesh , size and type to any type of standards, rails, strainging bolts etc including provision of binding wire complete all as specified and directed by the Engr-in- Charge.
Supply & Fixing in repairs galavanisediron 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including,securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and directed by the Engr-in- Charge. (each line wire to be measured)
Supply & Fixing in repairs barbed razor type concertina coil, 9SWG hot galvanized spring tensile wire of UTS 145 to 150 N/Sqm, zinc coating 250 to 300 gms/Sqm, dia of coil when un streched shall be 600 mm having minimum of coil (GI strip) 1.625 Kg/RM , hot dip galvanized razor ribbon tape of size .50 mm thickness, 19 mm wide before wrapping on central core wire fixed with 1.66 mm thick GI clips (minimum 25 Nos /RM ) and special nut and bolts to hold two coils together and extra rows paralled wire of 10 gauge complete all as specified and directed by the Engr-in- Charge.
Material and labour for mild steel hand rails, half round or other stock section , nosing to steps in cluding embeding in concrete and screwing etc. wind ties for roof, posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting, etc and similar work conforming to Fe 290 grade E 165 complete all as specified and directed by the Engr-in- Charge.
Material & Labour for preparation of new steel surfaces of any description over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.
Material and labour for preparation of old painted surfaces or newly plastered surfaces of any description and applying textured plaster 4 mm thick in cement martar (1:2) (Mix one part of white cement & two parts of Dholpuri clear quarts powder of 1 to 2 mm grading ) and texture finish shall be achieved with the help of hand driven machine to obtain plain surface of stone masonary pattern including necessary scaffolding and safety measures to carry out works upto triple stories bldg complete all as per manufactures instructions and pattern as approved by Engineer-in-charge.
Supply & Fixing fancy type Stainless steel curtain rods 20mm dia with decorative outer finish like wood veneer or brass with suitable decorative brackets for doors and windows complete all as specified and directed by the Engr-in- Charge.
Supply & Fixing roller/venetian blinds vertical//horizondal type made out of standard cloth of approved texture including necessary accessories complete all as specified and directed by the Engr-in- Charge.
Supply & Fixing in repairs wall paper of fibrious material, nonwoven vinyl free, making them fixed to wall with dry strips or with approved adhesive and of Design and pattern as approved by Engineer-in-Charge.
Material & Labour fixed in repairs Stainless steel railing made of hollow tubes, channels plate etc including welding, grinding,buffing, polishing and making curvature (where ever requird ) and fitting the same with necessary stainless steel nuts and bolts complete including fixing the railing with stainless steel dash fasteners, stainless steel bolts etc of required size complete all as specified and directed by the Engr-in- Charge.
Material & Labour for hard core of broken stone or boulders of gauge n. exc. 63 mm, deposited, spread and leveled in layers n. exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed by Engineer-in-Charge.
Material & Labour for 100mm thick PCC 1:4:8 type D2 using 40mm graded crushed granite stone aggregate as in subbase finished fair and even including necessary formwork complete all as specified and directed by Engineer-in-Charge.
Material & Labour for 100 mm thick cement concrete 1:2:4 type B1 (using 20mm graded crushed stone aggregate) in flooring including finishing the surface even and smooth without using extra cement complete all as specified and as directed
Material & Labour for providing precast cement concrete 1:2:4 type B1 (using 20 mm graded crushed stone aggregate) in cover slabs for manholes, etc and similar articles with plain fair faces including chamfers, weathering, throating etc and setting in cement mortar (1:4) with joints to match complete all as specified .
Material & Labour for TMT bars 8 to 10 mm dia and over cut to length, bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with the clips complete all as specified .
Supply & Fixing 3 mm thick aluminium composite panel cladding plain of approved colour/shade to beam/column/slab in circular/rectangular shape including cutting, notching, bending to shape as required jointing with silicon gel of approved colour & aluminum tubular hallow section 25 x 25 mm not exceeding 900 mm C/C on external column/beam/slab to hold ACP cladding complete all as per manufacturers instructions and approved by Engineer-in-Charge.
Haking out old glass (any thickness, size, quality or description from wooden,iron, aluminium frames cleaning and removing all materials like putty, beads, rubber beading etc. and putting new one for fixing new glass complete all as specified and directed by the Engr-in- Charge.
Supply and fixing 3 mm thick sheet glass ordinary quality and glazing in squares n.exc 0.5 Sqm in each pane complete all as specified and directed by the Engr-in- Charge.
Supply and fixing 4.8 mm thick sheet glass ordinary quality and glazing in squares exc 0.5 Sqm in each pane complete all as specified and directed by the Engr-in- Charge.
Supply and fixing 4 mm thick sheet glass ordinary quality and glazing in squares n.exc 0.5 Sqm in each pane complete all as specified and directed by the Engr-in- Charge.
Supply and fixing 4 mm thick sheet glass ordinary quality and glazing in squares exc 0.5 Sqm in each pane complete all as specified and directed by the Engr-in- Charge.
Supply and fixing 3 mm thick sheet glass ordinary quality ground or obscured or frosted on one side and glazing in squares n.exc 0.5 Sqm in each pane complete all as specified and directed by the Engr-in- Charge.
Supply and fixing Solar control film 50 micron reflective type, sticked on glass panes as per manufacturers instructions complete all as specified and directed by the Engr-in- Charge.
Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar including removal of rubbish out side MD land complete all as specified and directed by the Engr-in- Charge. Note: The place of disposal shall be find out by the contractor.
Material & Labour for 20 mm thick Granite (of any type) work (table rubbed and polished) as in steps, jambs, pillars, window- cills,cooking platforms, working table and like laid over and including 20 mm thick screed bed or bedding layer in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed by the Engr-in- Charge.
Rounding to edges of stone slabs such as in steps, cooking platform and making grooves for lining and other similar work complete all as specified and directed by the Engr-in- Charge.
Material & Labour for machine cut cudappa stone slab 20-25 mm thick fixed independently and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed by the Engr-in- Charge.
Material & Labour for machine cut kota stone slab 18 to 20 mm thick as in steps, landings etc laid over & including 20 mm thick screed bed in cement mortar 1:4 laid and jointed and pointed with grey cement slurry mixed with pigment to match the shade of the slab including mirror polishing and making 02 Nos grooves in steps complete all as specified and directed by the Engr-in- Charge.
Material & Labour for machine cut kota stone slab 18 to 20 mm thick as in vertical surfaces i.e.skirting/dado etc laid over and including 15 mm thick backing coat in cement mortar 1:4 jointed and pointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing as specified in SSR Part I complete all as specified and directed by the Engr-in- Charge.
Material & Labour for cutting and polishing with machine existing kota stone/ cudappah stone floor tiles and finally apply beeswax polish after cleaning with mild acid/detergent solution and filling/pointing the joints of tiles with white cement mixed with pigment to match the colour of tiles complete all as specified and directed by the Engr-in- Charge.
Material & Labour for PCC 1:3:6 type C-2 ( using 40 mm graded crushed stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed by the Engr-in- Charge.
Material & Labour for pre painted machine pressed precast concrete interlocking paver block any shape and size conforming to IS-15658-2006 of 60mm thickness M-35 Grade, glossy finished of approved colour including spreading screened river sand over surface for filling the joints and gently rolled with vibrator complete all as specified and directed by the Engr-in- Charge.
Material & Labour for sand filling under floors in layers n exc 25 cm thick spreading,levelling and well ramming including watering and consolidation complete all as specified and directed by the Engr-in- Charge.
Material and Labour for machine pressed cheqered cement coloured tiles in flooring of size 300mm x 300mm x 20mm thick mixed with grey cement and pigment laid over and including 15mm thick screed bed in cement mortar (1:4) set and jointed and pointed in neat cement slurry complete all as specified and directed by Engineer -in-Charge.
Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for and removal of debris out of MD land complete all as specified and directed by the Engr-in- Charge. Note: The place of disposal shall be find out by the contractor.
Material & labour for roughening surfaces of old concrete surfaces by picking, sweeping cleaning and washing down with water to remove dust etc including taking down tarfelt and rendering 15 mm thick plaster in cement mortar 1:4 mixed with water proofing compound as per manufacturer instructions and finished even and smooth without using extra cement complete all as specified and as directed Engr-in-charge. Note - WPC shall be measured and paid separately.
Material & Labour for PCC 1:2:4 type B-0 (using 12.50 mm graded crushed stone aggregate) as a leveling course / padding on RCC roof top surfaces laid to slope and foinished fair and even complete all as specified.
Material & Labour for preparing roof surfaces and applying water proofing treatment as per manufacturers instructions and comprises of the following activities complete all as specified and directed by the Engr-in- Charge.:- (a) Apply one coat of bituminous primer @ 0.25 Kg per Sqm. (b) Apply evenly a coat of bitumen 85/25 at the rate of 1.2 kg per sqm (c) Providing and laying five layered 4 mm thick APP (Atatic poly propylele) modified polyester reinforced water proofing membrane with minimum weight of 4.60 Kg/Sqm. The APP membrane shall be laid using torch application method with minimum 100 mm side overlap and 150 mm end overlap.The APP membrane shall be taken upto minimum 200 mm on vertial surfaces. The edge of the membrane shall be sealed with sealant. The rain water gutter portion shall be finished with cement mortar 1:4 to provide requisite slope towards rain water pipe outlet. (d) Apply solar reflective bituminous aluminium paint @ 100 gm/Sqm (e) Ponding test including supply of water for 72 hours after completion of water proofing work. Note - (i) Irrespective of lap the net covered area shall only be measured and paid. ii) The laying of membrane shall be got done through an authorised applicator of manufacturer of the membrane.
Material & Labour for preparing sunken portion of RCC floors and walls by wire brush to remove dirt, dust etc cleaning with water and applying water proofing treatment as per manufacturers instructions and comprises of the following activities complete all as specified and directed by the Engr-in- Charge.:- i) Providing 50 mm bore and 350 mm long medium grade GI pipe spouts with GI wire mesh on inside mouth after removing existing pipe and sealed the surrounding of GI pipe and junctions with epoxy mortar. ii) Applying rendering 6 mm thick in cement mortar (1:4) mixed with integral WPC on floor and wall surfaces upto 100 mm above FFL of sunken portion and finished even and smooth without using extra cement. iii) Fill the water and check for dampness and seepage. iv) Apply two coats of polymer modified cementious water proofing coating of minimum thickness of 1 mm for each layer as per manufacturers instructions on floor & walls (upto 100 mm above FFL) and spray coarse sand on surface when the second layer is still sticky. v) All pipes laid in sunken portions shall be covered with 50 mm thick PCC 1:3:6 type C1 all around after painting with anti corrosive black japan paint on GI/CI pipes. vi) Rendering 20 mm thick in CM (1:4) mixed with integral WPC floor and wall surfaces including rounding of corners and junctions stoping towareds spouts. vii) Test the water proofing area by filling water for 72 hours and tested for leakage/seepage to the entire satisfaction of GE. viii) Apply two coats of hot blown bitumen @ 1.5 Kg /Sqm for each coat and laying 50 micron black polythene film in floors. Note : a)If leakage/Seepage occured after filling water, the above said treatment shall be re-done completely without any extra cost. b) WPC will be measured and paid seperately.
Dismantling plain or corrugated steel/AC roof sheets any gauge, thickness, including Nainital or similar pattern roof covering complete all as specified and directed by the Engr-in- Charge.
Supply & Fixing pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa in roof covering/cladding to wall, chajjas, fixed with self tapping screws complete as specified.
Supply & Fixing pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, chajjas, valley gutter, ridge,crumple joint etc fixed with self tapping screws complete as specified.
Material & Labour for rolled mild Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt elded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and as directed .
Dismantling wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/blankets any thickness including cover fillets complete all as directed.
Material & Labour for false ceiling work of aluminium anodized ceiling grid system of grid size 605mm x 605mm made out of aluminium anodised main tee, cross tee and wall angle of size 23.5x23.5x1.5mm thick conforming to designation 3600 given in IS 207-10985 including ceiling cleats screwed with 6 mm dia. G.I. suspender hangers (upto 1200mm length) fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40mm x 3mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed by the Engr-in- Charge.
Supply & Fixing Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed by the Engr-in- Charge.
Material & Labour for 600mm x 600mm x 4mm thick (non asbestos fiber cement designer/ coloured) ceiliing board / tiles fixed in aluminium grids complete all as specified and directed by the Engr-in- Charge.
Material and labour for gypsum board 12 mm thick in ceiling fixed with screws as per manufactures instructions complete all as specified and directed by the Engr-in- Charge.
Dismantling floor hearth or wall tiling including cement mortar bedding / backing coat and removal of rubbish out side MD land complete all as specified and directed by the Engr-in- Charge. Note: The place of disposal shall be find out by the contractor.
Material & Labour for Non skid coloured ceramic tiles 7 to 8 mm thick (square/Rectanglar) area of each tiles exc 0.06 Sqm but n exc 0.09 Sqm in floor laid over and including 20mm thick screed bed or bedding layer in CM (1:4), set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile complete all as specified and directed by the Engr-in- Charge.
Material & Labour for Non skid coloured ceramic tiles 7 to 8 mm thick (square/Rectanglar) area of each tiles exc 0.11 Sqm but n exc 0.18 Sqm in floor laid over and including 20mm thick screed bed or bedding layer in CM (1:4), set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile complete all as specified and directed by the Engr-in- Charge.
Material & Labour for coloured glazed ceramic tiles 450mm x 300mm x 7mm thick but laid on vertical surfaces such as skirting/dado laid over and including 10mm thick backing coat in CM (1:3), set and jointed in neat cement paste and pointed in white or coloured cement to match the shade of tile complete all as specified and directed by the Engr-in- Charge.
Material & Labour light shade double charged vitrified ceramic tiles 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in floors laid over and including 20mm thick screed bed or bedding layer in CM 1:4 , set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile complete all as specified.
Material & Labour light shade double charged vitrified ceramic tiles 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36sqm (600x600mm), as on vertical surfaces such as skirting/dado laid over and including 10mm thick backing coat in CM (1:3), set and jointed in neat cement paste and pointed in white or coloured cement to match the shade of tile complete all as specified and directed by the Engr-in- Charge.
MADHU ENTERPRIZES
VIPUL CONSTRUCTION COMPANY
Shree Ayyappa Engineering
SR Construction
Satyanarayan Trading Co.
the bhimani group of companies
RAJENDRA CONSTRUCTION
Advait Enterprises
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .