SPECIAL REPAIRS TO CIVILIAN MARRIED ACCN

Demolition of lime concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L Plain cement concrete 1:5:10, E2 type with (40mm graded stone coarse aggregate) in sunken floor complete all as specified and directed.

M&L Treatment of sunken floor slab comprises of the following specifications and all as specified. (i) Taking down old treatment and clear the RCC slab and wall surface for full depth of sunken floor / lowered portion by wire brush chisel out any mortar and sticking the surface. ii) Provided 40 mm average thick PCC 1:2:4 type B-0 using 12.5 mm graded aggregate as in levelling course to achieve proper slope including 50 mm dia 350 mm long medium grade GI pipe spouts with wire gauge on inside mouth to be fixed. (iii) M&L for 10mm thick cement plaster in CM 1:4 with integral water proofing compound on any type of surface finished fair and even complete all as specified and directed. (iii) Apply FOSROC Nito proof 600PF (minimum 0.8mm dft) over a priming coat of Nito proof WB Primer or equivalent product of Asian Paints / M/s MC Bauchemie / CIPY / SIKA / Pidilite Dr Fixit / Thermax / STP as per manufacturer’s instructions to bottom and full vertical sides of sunken floors complete all as specified. (iv) Fill it with water and check for dampness and seepage. In case the slightest indication of seepage / leakage is noticed, then apply additional coat of water proofing material complete all as specified and directed. Note: Supply only WPC (integral /Liquid) shall be measured and paid separately vide relevant item of this schedule.

Taking down cement plaster from brick or stone including raking out joints, hacking for key, scrubbing down with water, etc. walls of any description including cleaning and disposal of debris outside the premises complete all as specified and directed.

M&L 10mm thick cement plaster in CM 1:6 on stone masonry surfaces or surface other than fair face of brick-work finished fair and even complete all as specified and directed.

M&L 15mm thick cement plaster in CM 1:4 on stone masonry surfaces or surface other than fair face of brick-work finished even & smooth without using extra cement complete all as specified and directed.

M&L 5mm thick cement plaster in CM 1:3 on brick work or concrete as ceiling surfaces finished even & smooth without using extra cement complete all as specified and directed.

M&L Racking out joints/ pointing to squared rubble masonry, coursed or uncoursed built in cement or cement lime mortar complete all as specified and directed.

M&L for Keyed pointing in Cement mortar 1:4 to squared rubble, coursed or uncoursed rubble complete all as specified and directed.

M&L for preparing the new plastered surfaces of wall and applying a coat of primer & two coat of oil bound distemper over 2mm thick wall care putty in two layer complete all as specified and directed.