Construction / Expansion of Administrative Block FF, Modular lab works, Expansion of FGS, Engineering Store and Loading Docks Roofing works in Plant-1, Partition works in M.M.C.F Section and other related works in Cattle Feed Plant at Gubbi, Tumkur District.

Construction / Expansion of Administrative Block FF, Modular lab works, Expansion of FGS, Engineering Store and Loading Docks Roofing works in Plant-1, Partition works in M.M.C.F Section and other related works in Cattle Feed Plant at Gubbi, Tumkur District.

A - CIVIL WORKS :

Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 1.5m as p...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

In ordinary/soft rock without blasting upto 1.5 m depth

Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per dr...

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...

Earthwork excavation ( in deposited soil ) and filling sides of foundation upto plinth in layers not exceeding 20 cms. in depth, compacting each deposited layer by ramming after watering with lead up...

Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with alllifts and lead, transportation to site, spreading, ...

Construction of Granular Sub-Base by Mix in Place Method by providing well graded Gravel, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavat...

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Materia...

Providing and Filling in foundation with granite / trap broken metal 100mm. and down size, with approved sand including hand packing, ramming, watering, including cost of all materials and labour wit...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

Providing and laying in position Reinforced/ Plain cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m t...

Above 3.60m to 6.60m Level

Above 6.60m to 9.60m Level

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...

Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...

do-- M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates

do for Column Footings / Retaining Wall Footings / Raft / Base Slab

Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates an...

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...

Above 3.60m to 6.60m Level

Above 6.60m to 9.60m Level

Above 9.60m to 12.60m Level

for Lintel / Tie Beam with M-25

0.00m to 3.60m Level

Above 3.60m to 6.60m Level

for Staircase with M-25

Above 3.60m to 6.60m Level

Above 6.60m to 9.60m Level

for Roof Beams with M-25

Above 3.60m to 6.60m Level

Above 6.60m to 9.60m Level

Above 9.60m to 12.60m Level

for Roof Slabs with M-25

Above 3.60m to 6.60m Level

Above 6.60m to 9.60m Level

Above 9.60m to 12.60m Level

or Chejja with M-25.

0.00m to 3.60m Level

Above 3.60m to 6.60m Level

Providing lath plaster with cement mortar 1:3, 5cms thick with 6mm dia mild steel bars at 20 cms. c to c both horizontally and vertically fixing chicken mesh for drop chajja, facia, backing to cup bo...

Providing Thermo-Mechanically Treated bars of grade Fe-500D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacen...

Above 3.60m to 6.60m Level

Above 6.60m to 9.60m Level

Above 9.60m to 12.60m Level

Providing and constructing granite / trap / basalt size stone masonry with hard stone in foundation & plinth in cement mortar 1:6, stones in courses not less than 20 cms high, bond stones at two m. ap...

Providing Brick work ( 230mm thk ) with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:4 (1 cement : 4 co...

Above 3.60m to 6.60m Level

Above 6.60m to 9.60m Level

Providing and constructing Half brick masonry ( 115mm thk ) with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:...

Above 3.60m to 6.60m Level

Above 6.60m to 9.60m Level

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...

Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type...

Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and sid...

Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround doo...

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspensi...

Above 3.60m to 6.60m Level

Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprisi...

Above 3.60m to 6.60m Level

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make conforming...

Above 3.60m to 6.60m Level

Above 6.60m to 9.60m Level

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of...

Above 3.60m to 6.60m Level

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of...

Above 3.60m to 6.60m Level

Above 6.60m to 9.60m Level

Providing & fixing SS fly proof wire gauze to windows, clerestory windows & doors to exsisting aluminium frame. Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both si...

Above 3.60m to 6.60m Level

Above 6.60m to 9.60m Level

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a primi...

Above 6.60m to 9.60m Level

Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on spec...

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel...

Above 3.60m to 6.60m Level

Above 6.60m to 9.60m Level

Providing and fixing stainless steel ( Grade 304) railing made of Hollowtubes, channels, plates etc., including welding, grinding, buffing, polishingand making curvature (wherever required) and fittin...

Above 3.60m to 6.60m Level

Above 6.60m to 9.60m Level

Providing and fixing good quality Exterior grade High Pressure Laminate / Fundermax (Single sided Thermosetting synthetic resin bonded sheet-Craft Paper Base) of 6mm thick as per IS 2046 standard with...

Above 6.60m to 9.60m Level

Providing and fixing of Aluminium composite panel of approved make and colour for wall cladding for Brick/Rcc/stone walls & coloumns/beams with necessary aluminium frame works at required level made o...

Providing, fabricating and supplying shadow box of required size and shape, for fixing in the spandrel portion of the structural glazing, in linearas well as curvilinear portions of the building by pr...

Above 6.60m to 9.60m Level

Providing and fixing plain multipurpose cement board (Hight pressure steam cured) with suitable screws for cement particle board in ceiling / Partition etc. complete.

6 mm thick Cement bonded wood par...

Above 3.60m to 6.60m Level

Above 6.60m to 9.60m Level

Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:3 (1 cement: 3 fine sand) to Ceiling / Concrete / brick masonry including rounding off corners wherever required s...

Above 3.60m to 6.60m Level

Above 6.60m to 9.60m Level

Above 9.60m to 12.60m Level

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removi...

Above 3.60m to 6.60m Level

Above 6.60m to 9.60m Level

Above 9.60m to 12.60m Level

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1...

Above 3.60m to 6.60m Level

Above 6.60m to 9.60m Level

Above 9.60m to 12.60m Level

Providing 20 mm cement plaster with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement to brick/stone masonry including rounding off corners wherever required sm...

Providing Flush/ Ruled pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lining, including cost of materials, labour, curing as per s...

Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the ...

Above 3.60m to 6.60m Level

Above 6.60m to 9.60m Level

Above 9.60m to 12.60m Level

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...

Above 3.60m to 6.60m Level

Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints finished with cement mortar 1:3 over existing cement con...

Above 3.60m to 6.60m Level

Above 6.60m to 9.60m Level

Providing and fixing 18 mm thick gang saw cut granite of any color and shade, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, Skirtings, ...

Above 3.60m to 6.60m Level

Above 6.60m to 9.60m Level

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in al...

Above 3.60m to 6.60m Level

Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufact...

Above 3.60m to 6.60m Level

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, e...

Above 3.60m to 6.60m Level

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle gre...

Above 3.60m to 6.60m Level

Providing and constructing un-reinforced plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M20 / M25 (Gra...

Providing and constructing un-reinforced plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), c...

Vaccum de-watering with vaccum pump and suction mat and compaction with skin floater clubbed with floating disc including cost of generator, HOM of machinery, Screed Vibratory, Power Floater, blade an...

Cutting transverse contraction joints 3 to 4 mm wide and depth 60mm in concrete slab using concrete cutting machine with diamond studded saw within 4-8 hours of casting of bay / slab etc. complete inc...

Providing to contraction joints polysuphide sealent (Pouring grade) confirming to BS : 5212 - 1989 into sawed groove widened at top for sealent reservoir of specified size and shape as per detailed dr...

Providing and laying Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and...

Providing and laying Cement concrete pavement with 1:2:4 for commercial & residential building floors, hardpaths, footpaths using 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size...

Providing and laying 80mm thick factory made precast M -30 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Commercial Traffic Axle load repetitions upto 10MSA & for Residential ...

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...

Above 3.60m to 6.60m Level

Above 6.60m to 9.60m Level

Above 9.60m to 12.60m Level

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 ltr/10 m² over and including one coat ...

Above 3.60m to 6.60m Level

Above 6.60m to 9.60m Level

Above 9.60m to 12.60m Level

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 g/L of approved brand and manufacture, including applying additional c...

Above 3.60m to 6.60m Level

Above 6.60m to 9.60m Level

Above 9.60m to 12.60m Level

Above 12.60m to 15.60m Level

Above 15.60m to 18.60m Level

Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required...

Above 3.60m to 6.60m Level

Above 6.60m to 9.60m Level

Above 9.60m to 12.60m Level

Finishing walls with Premium Acrylic Smooth exterior paint of required shade : Old work (Two coats applied @ 1.43 l/ 10 m²) over existing cement paint surface including preparing the surface after th...

Above 3.60m to 6.60m Level

Above 6.60m to 9.60m Level

Above 9.60m to 12.60m Level

Above 12.60m to 15.60m Level

Above 15.60m to 18.60m Level

Finishing walls with textured exterior paint of required shade :New work (Two coats applied @ 3.28 L/10 m²) over and including priming coat of exterior primer applied @ 2.20kg/10 m² to give an even ...

Above 3.60m to 6.60m Level

Above 6.60m to 9.60m Level

Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @0.75 ltr/10 m² of approved brand and manufacture to give...

Above 3.60m to 6.60m Level

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new or old work after thoroughly brooming the surface to remove all dirt, dust, mortar drops ...

Above 3.60m to 6.60m Level

Above 6.60m to 9.60m Level

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @ 0.80 ltr/10 m² of approved brand and manufacture i...

Above 3.60m to 6.60m Level

Above 6.60m to 9.60m Level

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes of 150mm dia conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap fo...

Above 3.60m to 6.60m Level

Above 6.60m to 9.60m Level

Above 9.60m to 12.60m Level

Above 12.60m to 15.60m Level

Above 15.60m to 18.60m Level

Above 18.60m to 21.60m Level

Above 21.60m to 24.60m Level

Providing and injecting chemical emulsion for Preconstructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top...

Providing and laying integral cement based waterproofing treatment iincluding preparation of surface as requried for treatment of roofs, balconies, terrace etc., consisting of following application. (...

Above 6.60m to 9.60m Level

Above 12.60m to 15.60m Level

Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direct...

Providing and fixing Steel work in built up tubular trusses (round, square or rectangular hollow tubes etc.) etc., including cutting, hoisting, fixing in position and applying a priming coat of appro...

Above 3.60m to 6.60m Level

Above 6.60m to 9.60m Level

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 g...

Above 3.60m to 6.60m Level

Above 6.60m to 9.60m Level

For PPGI Sheet Cladding

Above 3.60m to 6.60m Level

Above 6.60m to 9.60m Level

Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns ep...

Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns ep...

Above 6.60m to 9.60m Level

Above 15.60m to 18.60m Level

Above 21.60m to 24.60m Level

Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch, including fixing with polymer coated 'J' or 'L' hooks, bolts & nuts 8mm dia. G.I plain/bitumen washers com...

Providing and fixing Aluminium Turbo ventilator complete as per technical specifications : Non Power Driven with 1.3mm thickness and 38 No.s of Vanes & turbine doom thickness 1mm and total weight not ...

Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15 cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs, laid to slope compacting, including cost of materials, labour, cur...

Providing & Fixing of Integral Densified Tegular/Butt edged Eco Friendly Lightweight Calcium Silicate Suspended Ceiling System in Module Size of 600x600x15mm with Exposed GI Plain T24 Grid for Offices...

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 g/m2 (bot...

Manufacturing, supplying and fixing wooden ward robe of 0.60m deep using 19mm thick vinyl bonded water proof block board, shutters allround ward robe, lockable drawers with sliding channels, cupboard ...

Above 9.60m to 12.60m Level

Providing and laying 100mm thick pre-cast cover slabs over Road side drains / utility ducts / Rain water harvesting pit of width not exceeding 1000 mm using M20 concrete reinforced with TMT bars Fe 55...

Providing and fixing factory made precast RCC perforated drain covers, having concrete of strength not less than M-25, of size 1000x450x50 mm, reinforced with 8 mm dia four nos longitudinal & 9 nos cr...

Supplying S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED) pipes NP-3 Class conforming to IS:458-1988 with latest amentments using ordinary portland cement, for sanitary works and conveying to work sit...

Supplying and fixing M15 grade precast cement concrete Kerb stones for Roadway, Sidewalls and gutters fixed with CM 1:3 fixed and finsihed in line as per direction of Engineer in charge. (The cost of ...

Dismantling GS / PPGI Sheet roofing including ridges, hips, valleys and gutters etc., and stacking the material to the appropriate disposal area as per direction of Engineer-in-charge.

Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking to the approp...

Dismantling chain link fencing including removing the posts, cement concrete fedestals, foundation and stacking the useful materials safely at a distance to the appropriate disposal area as per direct...

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge.

Demolishing brick / block masonry work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction...

Demolishing stone rubble masonry / SSM manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction...

Demolishing cement concrete manually/ by mechanical means including disposal of material to the appropriate disposal area as per direction of Engineer-in-charge.

Dismantling tile work in floors / dadoing and roofs laid in cement mortar including stacking material to the appropriate disposal area as per direction of Engineer-in-charge. : For thickness of tiles ...

Dismantling doors, windows and clerestory windows (steel or wood / aluminium) shutter including chowkhats, architrave, holdfasts etc. complete and stacking to the appropriate disposal area as per dire...

Dismantling weather proof course and removing and conveying the debris to a distance to the appropriate disposal area as per direction of Engineer-in-charge.

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as a...

B - SANITARY-PLUMBING WORKS :

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. fl...

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively.

Providing and fixing PTMT 15 mm Urinal spreader size 95x69x100 mm with 1/2" BSP thread and shapes, weighing not less than 60 g.

Providing and fixing granite stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with c...

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making go...

Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge

Providing and fixing CI / PVC Nahani trap of approved make conforming to ISI specifications and construction of Cistern in CC 1:2:4 as per directions (Rate is inclusive of cost of materials and fixtur...

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.

P/F. UPVC or equivalant approved make Pipes (Supreme or equivalent make) with malleable G.I. 'R' brand specials such as tee, bend, elbow, socket, reducing sockets, union, collers etc. as required incl...

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : a) 25 mm nominal bore

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complet...

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with ...

Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes & fittings with one step solvent cement, trenching, refilling & testing of joints complete as per direct...

b) 110mm nominal dia pipes

c) 150mm nominal dia pipes

Constructing brick masonry inspection chamber 455x610mm, and 450mm depth, (clear inside dimension) for single pipeline, using table moulded non-modular bricks of class designation 50 in cement mortar ...

Providing and fixing high density polythylene water storage tank with cover, conforming to ISI : 12701, colour of opaque white or as approved by Engineer-in-charge. The rate includes making ncessary h...

C - ELECTRICAL WORKS :

LT PANEL : Supply, installation, testing and commissioning of M.V. panels and switch gears suitable for 415V, 3 phase, 4 wire, 50Hz power distribution system. The panel shall b...

DISTRIBUTION BOARDS: Supplying and fixing regular MCB distribution boards on wall/wood board/ flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity...

4 Way TPN MCB DB

1 No. 32A 4P RCCB 100mA + 32A TPN MCB

12 nos. of 6/16A SP MCBs

4 Way TPN MCB DB

1 No. 32A 4P RCCB 100mA + 32A TPN MCB

12 nos. of 6/16A SP MCBs

6 Way TPN MCB DB

1 No. 32A 4P RCCB 100mA + 32A TPN MCB

18 nos. of 6/16A SP MCBs

Supplying and fixing of following rating, MCB in the existing MCB DB complete with connections, testing and commissioning etc. as required.6A, SP MCB

Supply, installation, testing and commissioning of metal enclosure. The enclosure. shall be wall mounted using necessary brackets and fixing accessories. SP enclosure

LT CABLE AND TERMINATIONS :Supply & Laying of 1100V grade, XLPE/ PVC insulated, PVC sheathed, Aluminium / copper conductor, steel armoured cables. The cable shall be laid in exsiting trench, cable ...

4C 10Sq.mm Al. cable

3.5C 120Sq.mm Al. cable

3.5C 185Sq.mm Al. cable

CABLE END TERMINATIONS: Supply and providing end termination for below listed PVC insulated, PVC sheathed, aluminium conductor,steel armoured, 1100V grade , cable using brass cable glands and alumini...

4C 10Sq.mm Al. cable

3.5C 120Sq.mm Al. cable

3.5C 185Sq.mm Al. cable

Supply, transportation & installation of following sizes of Hot Dipped Galvanized Iron ladder type cable trays with rungs at span of 250 mm including horizontal and vertical bends, reducers tees, cros...

200 mm x 50 mm x 2 mm

100 mm x 50 mm x 2 mm

Supply and fixing of conduit / structural steel support ceiling suspended type / wall bracket type clamps with necessary saddles for fixing of conduits / cables, cable trays and where ever necessary. ...

Providing and laying Double wall Corrugated HDPE pipes for Electrical. Telecommunication & Signalling lines having flexibility & anti termite, anti corrosive, good abrasion, fatigue strength & UV resi...

110 mm Outer dia

Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights...

Sand Filling in Wells / Cable Trenches complete as per Drawing and Technical Specifications.

Supply and laying of brick protection for under ground cables laid in existing trench.

WIRING SYSTEM : Supplying and wiring adopting loop system in suitable size PVC Conduit/casing capping casing capping using2x1.5Sqmm (Phase & Neutral) &1x1.0sqmm (Earthwire)FRLS multistrand PVC insulat...

Medium point above 3 mtrs upto 6 mtrs.

Long point above 6 mtrs upto 10 mtrs.

Two in a row above 3 mts upto 6 mtrs from tapping point to outlet via switch box

Three in a row above 6 mts upto10 mtrs from tapping point to outlet via switch box

Ceiling fan point controlled by 6A modular type switch and fan regulator. Medium point above 3 mtrs upto 6 mtrs.

Long point above 6 mtrs upto 10 mtrs.

Exhaust fan point (Single phase) controlled by 6A modular type switch and 6A socket outlet near the exhaust fan - Medium point above 3 mtrs upto 6 mtrs.

Supply & Wiring for Lights using 2.5 sqmm flexible copper, 1100 volts grade PVC insulated wires drawn through 2mm thick, suitable size PVC conduit in concealed manner using necessary conduit accesso...

2 light point controlled by 1no. 6A SP MCB (15 mts)

3 light point controlled by 1no. 6A SP MCB (20 mts)

4 light point controlled by 1no. 6A SP MCB (25 mts)

CIRCUIT MAIN / POWER MAIN / SUBMAINS : Supplying and wiring for lighting circuit mains/ power mains/submains, using one of FRLS PVC insulated 1100V grade, multistrand Copper conductor single core cabl...

2 x 2.5 Sqmm + 1 x 1.5 Sq mm PVC Insulated wires drawn in 20 mm dia PVC conduit

2 x 4 Sqmm + 1 x 2.5 Sq mm PVC Insulated wires drawn in 20 mm dia PVC conduit

4 x 6 Sqmm + 2 x 4 Sq mm PVC Insulated wires drawn in 32 mm dia PVC conduit.

4 x 10 Sqmm + 2 x 6 Sq mm PVC Insulated wires drawn in 40 mm dia PVC conduit.

Supplying and flush mounting powder coated metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. (Group-A)...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

Supplying and fixing of modular switch/ Socket / stepped electronic fan regulator / dimmer / telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293. 6Amps one way. Group B

6Amps 3way socket

16Amps one way switch

6/16Amps universal socket

Stepped Fan Regulator

Supplying and fixing of metal clad industrial plugs and sockets. : 3pole+earth 440V SOCKET - 32A

Supply and fixing of surface mounted 1-ph/3- ph combination 3/5 pin industrial type socket housed in IP-66/67 enclosure. The rate shall include providing of plug top. 16A, 2P+E, 3- phase socket with ...

SUPPLY & INSTALLATION OF LIGHT & FAN FIXTURES: Supply of round/square recess/surface mounted rolling type LED Down light with W GU 10 LED Lamp Rib Fabricated from diecast aluminium with white powder ...

LED square or round down light 10-12W

LED square or round down light 15-18W

Supplying of .....feet -PVC Batten with integrated LED tube .... W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V@ 50/60Hz & Po...

LED light fitting 1 x 4' - 20/22 W

LED light fitting 1 x 4' - 36/40 W

Supplying of 10W, LED, bulk head light fixture of type LBHE-10-CDL of CG make/equivalent.

Supplying of recess mounting non integral type ........ LED w luminaire comprising of pressure decast/extruded aluminium housing, with spring loaded false ceiling clamps, Power LEDs with CCT 6500 degr...

Supplying of 36W LED, 2 X 2 surface Mounted Light Fixture of type LCTLSNE-36-FO-CDL of CG make/equivalent.

Supplying of 70W, LED, High efficeincy round high bay in PDC housing industiral light fixture of type TIP-311-70-57-SL-CP-NSG of CG make/equivalent.

Supplying of 150W, LED, High efficeincy round high bay in PDC housing industiral light fixture of type LHB11-150-CDL/60-HPM of CG make/equivalent.

Fixing all types and all capacities fluorescent / false ceiling / spot light / CFL / LED fittings indoor on the wall / ceiling/ rafters / girders using 23/0.0076” twin twisted PVC insulated wires, ...

Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, and 50 cycles. Single phase AC supply conforming to IS-374-1979 and with double...

Fixing a ceiling fan of all capacities and all types with necessary clamps & S hook made out of 15mm dia MS rod, with 5 amps ceiling rose of approved quality with necessary length of 23 / 0.0076 inch...

Supplying exhaust fan of 1440 RPM of 300mm (12") size with bracket blades complete for light duty suitable for operate on 230V 50Hz, AC Supply.

Fixing one exhaust fan in the nitch already left in the wall with bolts and nuts and 5 amps ceiling rose with sufficient length of 23 / 0.0076 inch PVC insulated twin core wire of approved make.

Supplying of 1440rpm 15" Sweep (450 mm)heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete.

Supply and fixing of heavy duty oscillation type propeller fan available with impeller consisting of 3 blades in bracket type, column /wall mounted, 450mm sweep, 1-Phase, of Havells make/equivalent.

TELEPHONE SYSTEM : Supplying and fixing of modular switch/ Socket / telephone socket etc., on existing modular switch plate as per IS 3854 and IS 1293. - Telephone socket

Supplying & drawing PVC flexible 2 pair telephone unarmoured tinned copper cable.

Supplying & Laying of 2mm thick, heavy guage PVC conduit pipe in the concealed slab / groove cutting with suitable size bends, collars, clamps, metal junction boxes adhesive paste etc., and running b...

Supplying & installing of multicore 0.61mm, copper conductor, PVC insulated, PVC sheathed, armoured telephone cable laid drawn through,existing conduit with all necessary accessories as required. 20 p...

Supplying and fixing of MDF krone juntion box with KRONE module / Telephone cable termination.- 20pair - Supplying & Fixing

DATA SYSTEM : Supplying & Laying of 2mm thick, heavy guage PVC conduit pipe in the concealed slab / groove cutting with suitable size bends, collars, clamps, metal junction boxes adhesive paste etc.,...

25mm dia PVC Conduit - Supplying & laying

Supplying and fixing of modular Socket on existing modular switch plate as per IS 3854 and IS 1293. RJ45/I.O outlet

Supplying and drawing UTP -CAT 6E LAN cable

Supply, installation , testing & commissioning of managed L2 48 port switch of 10/100/1000 Mbps with 2 Gig SFP. The switch shall be mounted on existing rack. The rate shall also include cost of powe...

Supply, installation , testing & commissioning of managed L2 12 port POE switch of 10/100/1000 Mbps with 2 Gig SFP. & power budget of min. 180W. The switch shall be mounted on existing rack. The r...

Supply, installation , testing & commissioning of managed L2 24 port POE switch of 10/100/1000 Mbps with 2 Gig SFP. & power budget of min. 360W. The switch shall be mounted on existing rack. The r...

Supply and fixing of patch panel with CAT-6 I/O mounted on existing rack with all necessary fixing accessories. The rate shall also include providing end termination. 24 port 10/100/1000 patch panel

Supply and fixing of patch panel with CAT-6 I/O mounted on existing rack with all necessary fixing accessories. The rate shall also include providing end termination. 48 port 10/100/1000 patch panel

Supply, installation , testing & commissioning of SFP Transceiver 1000BASE-LR SINGLE MODE LC GBIC

Supply and fixing of …mtrs cat 6 patch cable- 1 mtr

Supply and fixing of …mtrs cat 6 patch cable- 2 mtr

OS2 SC-LC single mode duplex fiber optic Patch Cord 3Mtrs

Supply and installation of rack mount LIU loaded with couplers and all necessary accessories. -6 fibre SC style single mode Fiber Panel loaded with Splice Tray, Adapters & Pigtails- 1U

Supply, laying and testing of Optical fiber cable, the rate shall include the cost of joint enclosure and splicing of Optical Fiber cables. - 6 Core single mode OS2 corrugated steel tape armoured loo...

Supply and fixing of switch wall mounting closed rack with power manager and cable manager - 15U with 450mm depth with all necrssary accessories as required.

Supply and fixing of switch wall mounting closed rack with power manager and cable manager - 9U with 450mm depth with all necrssary accessories as required.

IP CCTV SYSTEM : Supplying & Laying of 2mm thick, heavy guage PVC conduit pipe in the concealed slab / groove cutting with suitable size bends, collars, clamps, metal junction boxes adhesive paste et...

25mm dia PVC Conduit - Supplying & laying

Supplying, drawing and connecting of 1 pair E - Cat-6 cable in 25mm dia PVC conduit with all other accessories.

Supply, installation, testing and commissioning of outdoor 2.0MP IP IR Bullet WDR, 2.7-12mm varifocal Color Camera, 1/3" CMOS, H.264/MJPEG High-profile, dual Stream support, True Day & Night (TDN) wi...

Supply, installation, testing and commissioning of outdoor 2.0MP IP IR Minidome, WDR, 2.7-12mm varifocal Color dome Camera, 1/3" CMOS, H.264/MJPEG High-profile, dual Stream support, True Day & Night ...

Supply and fixing of …mtrs cat 6 patch cable- 1 mtr

EARTHING SYSTEM : Supplying, fixing and wiring earth electrode for grounding of Lifts, Transformers, DG sets etc., Using 40 mm dia 2.9mm thick 2.5mtrs long GI pipe with GI funnel with mesh and suitab...

Supplying and running of GI strips for grounding connections, using necessary fixing materials as required - 25x3mm GI strip

Supplying and running of GI strips for grounding connections, using necessary fixing materials as required - 8 SWG, GI Wire

MISCELLANEOUS WORKS: Supply & laying of 2 mm thick, PVC conduit with all conduit accessories etc., as required. The rate shall include chasing of walls / floors and plastering the chased portion as re...

25mm dia PVC Conduit

32mm dia PVC Conduit

Fixing of first Aid box containing medicines for 50 persons to give first aid treatment.

Supply and fixing in position approved shock treatment chart written in English, Hindi and local language. The chart shall be framed in teakwood frame and covered with glass.

Supply erection, testing, commissioning of ..TR Invertor type split Airconditioners suitable for operation on A/C supply single phase 50Hz 230V with hermetically sealed inverter compressor with air co...

D - MODULAR LAB :

WALL PANEL - Supply & Installation of 50 mm thick double skin wall panel made of 0.6 mm thick Both side PPGI sheet with mounting accessories and PUFF of density 40Kg/M3 as in fill (P...

CEILING PANEL - Supply & Installation of 50 mm thick double skin ceiling panel made of 0.6 mm thick Both side PPGI sheet with mounting accessories and PUFF of density 48Kg/M3 as in fill (Panel Includi...

Supply and installation of NLT 2mm thick anodised aluminium Covings with all necessary accessories including Supply and applying of food graded silicon sealent.

3D or 2D internal corner coves between wall panels and ceiling panels including Supply and applying of food graded silicon sealent.

Outer corner coving for the lab areas including Supply and applying of food graded silicon sealent.

CLEAN ROOM DOORS : MODULAR DOORS PAPER HONEY COMB 50 MM & 80 mm PCGI PCGI

Supply and Installation of Clean room doors with not less than 46mm thick door leaf and frames equal to 80 mm thickness with p...

Equal Double leaf door 1800mm (W) x 2100mm (H)

VIEW PANELS : All Viewpanel units are Single Glazed and inside flush with inner surfaces of the pre coated GI wall panel system.Each unit is constructed of one panels of 6 mm Tougened glass. The ...

LIGHT FIXTURES : Supply and Installation of false ceiling Lights by doing Cutouts and fixing of necessary C caps in the ceiling panel

Light sizes 2 feet x 2 feet (Square type) 36 WATTS

Cassette Acs. : Supplying erection, testing, commissioning of Invertor type split Air conditioners suitable for operation on A/C supply single phase 50 Hz 230 V with hermetically sealed inverter compr...

Supply erection, testing, commissioning of Cassette type split Air conditioners suitable for operation on single/three phase AC supply, hermetically sealed compressor with air cooled condenser motor c...

Modular Lab Furniture manufactured from Standard 18G & 20G of Galvonised Iron Sheets and Epoxy Powder coated with thickness of 40-60 Microns with Jet Black Granite Top 20mm thickness. All the cabine...

For Analytical Lab : Wall side lab tables with Jet black granite 20mm thick 9500 x 750 x 900 mm

For Protien Estimation Lab : L Shaped lab tables with Jet black granite 20mm thick (3650+3950) x 750 x 900 mm

For NIR Lab : Wallside lab table with Jet black granite 20mm thick 2750 x 750 x 900 mm

Lab Island Table with Jet black granite 20mm thick :3600 x 1500 x 900 mm

P/F GI powder coated Chemical storage cupboard 915mm x 450mm x 1830mm (WxDxH)

P/F Storage cupboard 1950 x 900 x 450 with 2 door and 4 shelf

P/F PP Peg Board (24 Pegs)

P/F PVC skirting

P/F PP sink with antisiphon bottle and flexible connector

P/F 3-way water faucet

P/F Emergency Single eye wash

P/F Electrical swithes,sockets-6-module plate

Fume Hood 4’(L) x 2.5’(W) x 8’(H)

0.5HP Inbuilt centrifugal blower- single Phase 01 No

5/32A power socket-2nos

Working area 4 x 2 x 2-FRP coating Panel Mounted Tap & 45 Nozzle for Nitrogen-0...

Supply of lab furniture for Sample Storage Room (LAB -5)

Industrial Storage cupboard (1800 x 900 x 650 mm)

Removing, Shifting, Re-assembling & Positioning of exisitng Island table (Approx. Size 3700 x 1500 x 900mm Ht) to new Lab area as per site instruction complete