WBPHED/EE/CMD/eNIT14/S15

Amount

Supply & delivery of following materials at below mention sites :-

GRP street light pole in conical shape using thermoset resign having minimum 65% glass content with following specifications : Length – 7 mtr. Top I.D – 85 + 2 mm. Bottom I.D – 176 + 2 mm. Thikness – 5 + 0.5 mm. Type – Non buried (above ground) The above pole is provided with suitable size MS base plate, foundation bolt & nut set, internal junction box & MS ring arm [Make -Fibro Plastichem / EPP/ PHE approved] (Test certificate will be submitted at the time of delivery)

16 sq. mm 2 core 1.1 KV grade XLPE insulated Al. armoured Cable conforming to IS:7098 (Part-I) 2011 with upto date amendments. [Make- Gloster/ Mescab/ Currency/ Crystal/ Polycab/ PHED approved Make]

40W LED Decorative Post top for 3600 light with IP 65 protection for gate light. [Make: Havells (Type- RUBYPT40W) / Philips/ PHED approved make]

100W LED flood light luminarie with IP 65 protection. [Make: Philips (Type- BVP)/ Havells/ PHED approved make]

GRP street light pole foundation work :

Making RCC foundation (as per drawing & measurement provided by GRP Pole manufacturer) for pole erection by using suitable reinforcement & concrete grade M20 inlcuding making provision looping cable line, excavation & refilling of earth pit with shifted soil & ramming properly as per specification & direction of EIC .

Al. ar. Cable laying work :

Laying of one no 16 sq.mm. PVC Al. Ar. cable in underground trenche 460mm. wide X 760mm. average depth, with brick protection on the top of the cable with 8 (eight) nos. bricks per mtr, including filling the space between the brick & cable & also the trench with shifted soil, levelling up & restoring surface duly rammed.

Laying 16 sq.mm. PVC Al. Ar. Cable through pump house wall including supply of sockets for clamping and grouting the above cable in each pole foundation (Approx 10 mtr length)

Supply & delivery of outdoor type Kiosk box (Size: 10"x 6"x12") with suitable gauge M.S. sheet along with hinged type front door with locking arrangement including M.S leg angle frame covered consisting 3 way Aluminium busbar 63 amp. fixed on a Porcelain material and grouting its legs in rick piller.

Installation of above supply Kiosk bok (item no.-3, c) and making brick/PCC foundation (Size: 14"x 10"x 18") with supplying bricks/stonechips, sand, cement etc including plastering and neat cement & making electrical connection complete as per direction EIC

LED set fitting & electic connection work :

Supply & drawing of 2 X 2.5 sq. mm and 1 x 1.5 sq. mm (for earthing) FR PVC insulated 1.1 KV grade single core copper cable (PHED. approved make) from pole junction box to LED fixture at the top of the pole and making electrical connection complete

Erection of GRP pole on RCC foundation with help of MS base plate, foundation bolts, nuts, washers etc. and fitting & fixing of four (4) nos. flood light luminaris on pole ring arm with necessary inter connection and jointing of cable and testing complete of entire set as per direction EIC

Supplying and fixing GI/PVC water proof type looping cable box of required size comprising with one 250 volt, 15amp kit kat fuse unit, one NL on porcelain insulator with locking arrngement fitted on brick wall with proper clamping arrangement for gate light.

Fixing outdoor type gate light fitting on gate with supply upto 50 mm dia GI pipe as required length and making electrical connection by Al. armoured cable from loop box to light fiting (without controlling switch) laying over CC foundation including clamping & other necessary materials required to complete electrical connection.

Earthing of Loop Box by spike earhing (20mm X 2 mtr.) with drawing 8 SWG GI wire as per IE rule.

Supply & fitting G.I angle with wire net fencing arrangement for Gate light

Supply & fitting fixing 16 Amp. SPN MCB (Make-Havells/ Siemens/ ABB/L&T) with enclosure & 16 Amp Piano key type Switch with pvc box inside the pump house wall and making connectin with supply cable for operating the compund light with supply necessary materials all complete as per direction of EIC.

Full Bore Electromagnetic Flowmeter: Protection: IP68 (Minimum inbuilt 20 meter cable, factory potted), Full bore type Electro Magnetic Flow meter With Smart Transmitter (Volume Flow rate output: 4-20mA HART Output and totalizer Pulse Output: 0.05cu.m /Pulse) With LCD 4 line backlit display, Calibration lab as per ISO 17025 , Accuracy: 0.5% , +/- 2mm/sec, Measuring, Reference & Empty Pipe detection electrode with Polyurethane/Hard Rubber Liner ,Supply: 24V DC or 230V A.C

Magnetic Flow Meter DN80

Installation of the above mentioned full bore electromagnetic flow meter with laying of cable(DEPT. SUPPLY) and supplying of other fixing material all complete as per direction of EIC.

Supply and delivery of Residual Chlorine Measurement (Clear Water) Analyzer : Electrode, Digital functionality with Inductive Data Transmission from Sensor to Transmitter Diaphragm: PTFE , Signal transmission: Digital. Reference system: Gel., Conductivity: min 50uS/cm Temperature sensor integrated. Transmitter liquid analysis for Chlorine Digital sensors; Memosens protocol, In built Digital Display, Input: 1x Memosens Sensor, Supply: 230VAC/24V DC Plug &Play for sensors modules, SD-slot data logger, alarm relay, Protection: IP66 Input: 1x Digital Sensor, Output: 1x 4-20mA , Supply: 24V DC Flow Fit Assembly along with Standing Sample Handling Panel Make: ABB/ Endress+Hauser India Pvt. Ltd / approved make

Installation of the above mentioned Chlorine Measurement analyzer with supplying of fixing materials all complete as per direction of EIC.

Supply and installation of Pressure Transducer.

Supply, delivery and installatation of Pressure Transducer along with PLC with controlling programme to Operate Pump motor by sensing signal of water level in OHR including making all electrical connections & testing complete as per direction of EIC. (Panel make: ECS/ PHE approved make.)

Supply and Installation of TATA make including necessary sockets,

G. I. pipes (25 mm dia). (Medium quality)

galvanised iron socket with I.S.I. mark (25 mm dia.).

G.I. plug (25 mm dia.)

G.I. reducing socket (25 mm dia.)

G.I. bend. (25 mm dia.)

G.I. plain equal elbow (25 mm dia.)

G.I. plain tee (25 mm dia.)

25 mm dia G.M Gate valve (Make : Leader / Zollata)

Pressure gauge 102 mm. dia and 7 kg. /cm2 range, brass cocks and fitting complete (Make- H. Guru)

Add. GST@18%

Add. Cess@1%

ORIENTAL ENGINEERING CO. (BID ID -5732378)

DEY ENTERPRISE (BID ID -5736320)