S/R of Sub-Treasury office at Gunupur during 2025-26

Scarping old paint with scrapers, sand papering & washing with soap water or soda including scaffolding charges up to 5m height.with cost of all labour T&P etc. complete as directed by the Engineer in charge

Dismantling & removing Brick / Stone Masonry in C.M./L.M. upto 3.0m height including stacking the useful materials for reuse & removing the debris within 50m lead with cost of all labour T&P etc. complete as directed by the Engineer in charge.

Removing Old lime or cement plaster including raking out joints 12mm deep and removing the debris within 50m lead with cost of all labour T&P etc. complete as directed by the Engineer in charge.

Dismantling & removing doors, windows & ventilators including removal of frame, hinges, fastening and stacking the useful materials for reuse & removing the debris within 50m lead with cost of all labour T&P etc. complete as directed by the Engineer in charge.

Dismantling & removing 2.5cm thick A.S. Flooring including stacking the useful materials for reuse & removing the debris within 50m lead with cost of all labour T&P etc. complete as directed by the Engineer in charge.

Earth work in foundation in hard soil or gravelly soil within 50m intial lead and lifts 1.5 M intial lifts including dressing and leveling the bed and depositing the excavated earth at places away from work site including cost of all labour, T&P and dewatering if required for the work etc. complete as per drawing and Technical specification and as directed by the Engineer-in-Charge.

Supplying and filling in foundation and plinth with sand, laying in layers, well watered and rammed including cost, conveyance, royalties and EMF,DMF and aditinal charges of all materials, cost of all labour and T&P etc. complete in all respect as per direction by the Engineer in charge.

Providing and laying PCC (1:3:6) in foundation and floors using 4cm size crushed stone granite aggregates including laying in layers, ramming, watering and curing etc. complete including cost, conveyance, royalties, EMF,DMF and aditinal charges of all materials and cost of all labours, T&P etc complete as per the direction of the Engineer -in –charge.

R.C.C work M-20 grade with clean hard crusher broken granite chips of 12mm size of approved quality from approved quarry including hoisting, lowering and laying concrete with necessary slope and smoothness to receive tar felting or terracing, watering and curing for four weeks, centring, shuttering and finishing the exposed surface and ceiling smooth to receive white washing or painting providing grooves or beads and fan hooks as per requirement in ceiling where necessary, cost of water, including cost, conveyance, royalty EMF,DMF and aditinal charges of all the materials and labour, T&P and cess etc. complete in all respect but excluding cost of M.S rods or Tor steel and binding wire 18 to 20 gauge and labour charges for straightening, cutting, bending and binding and tying the grills and placing in proper position as per specification and direction of the Engineer-in-charge. A. Footing Base

. B. Beam & Column

Straightening cutting, bending & binding of bent up or coiled rods confirming to I.S. 432 for Plain and 1785 for Tor steel and binding, tying the grills, hoisting, lowering and placing in proper position including cost, conveyance and EMF,DMF and aditinal charges of all materials and cost of all labour with all T&P required for the work etc. complete as directed by the Engineer- in-Charge.

Fly ash brick masonry in superstructure with cement mortar (1:6) using bricks of 23cm size, after immersing Bricks before use with watering, curing etc. complete including cost, conveyance, royalties,EMF,DMF and aditinal charges of all materials, cost of all labour, all T&P etc. complete in all respect as directed by the Engineer-in-charge.

Providing 16 mm thick C.P. with C.M. (1:6) on inside surface of wall with screened and washed sharp sand for mortar and finished smooth including watering and curing with cost, conveyance, royalties and EMF,DMF and aditinal charges of all materials with cost of all labour, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge.

Providing 2.5cm thick A.S. Flooring with cement concrete (1:2:4) using 12mm size crushed stone granite aggregates including laying, punning, watering and curing etc. complete including cost, conveyance, royalties, EMF,DMF and aditinal charges of all materials and cost of all labours, T&P etc complete as per the direction of the Engineer -in –charge.

Supplying, fitting, fixing of Granite tiles of size 0.1 to 0.4sqm (Pulished) in dadoo in all floors over 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including cost, conveyance and EMF,DMF and aditinal charges of all materials, cost of all labour, T&P etc. complete as per the direction of the Engineer-in-charge.

Supplying , fitting and fixing of openable UPVC doors with door frame of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixtures including cost, conveyance and EMF,DMF and aditinal charges of all materials, cost of all labour, T&P etc. complete as per the direction of the Engineer-in-charge

Supplying , fitting and fixing of two track UPVC sliding window of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixtures including cost, conveyance and EMF,DMF and aditinal charges of all materials, cost of all labour, T&P etc. complete as per the direction of the Engineer-in-charge

Supplying, fitting, fixing of all types of MS Door / Gates made of ISI marked standard MS Angles of approved thickness and quality of approved Manufacturers with all required iron and aluminum fittings, including mending to sizes supplying and fixing hinged cleats, sand blocks and fixing of oxidized iron or chromium plated iron aldrops, tower bolts, knobs or rings or handles, hinges, screws and other fittings, etc. complete as per requirement including cost, conveyance and EMF,DMF and aditinal charges of all materials and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge

Painting two coats with approved weather seal paints of approved colour, shade on wall surface over a coat of wall primer including sand papering, polishing the surface, cost, conveyances, EMF,DMF and aditinal charges of all materials and cost of all labour with T&P etc, complete as per specification & direction of Engineer-in-charge.

Painting two coats with approved enamel paints of approved colour, shade Iron / work including sand papering, polishing the surface, cost, conveyances,EMF,DMF and aditinal chargesof all materials and cost of all labour with T&P etc, complete as per specification & direction of Engineer-in-charge.