REPAIR OF BOUNDARY WALL, FENCING GATE, DRAIN, CULVERT, PATH ETC UNDER AGE B/R-I OF GE (NORTH) MEERUT CANTT

Amount

Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and directed

S&F ornamental and intricate design framed work as in doors or gates of angle or other section with gussets plates, rails, braces, etc, complete drilled for fixing of steel sheeting or other covering, Doors, etc, to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings(exclusive of steel, sheeting or other covering, running rails and guides) and hanging, also fastening and fixing complete conforming to Fe-290 Gde- E-165 complete all as specified and directed

Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and as directed.

S&F ornamental and intricate design MS framed work such as grills, guard bars of window and similar work with ends of bars shouldered and/ or riveted, or forged into spikes conforming to Fe 290(Gde E-165) complete all as specified and directed.

M & L for preparation of New Steel and iron work of any description over 10cm width or girth and applying two coat of synthetic enamel paint and over one coat of red oxide primer complete all as specified and as directed.

Demolition of reinforced Concrete of any description and in any position not otherwise specifically provided complete all as specified and directed.

M&L for RCC M-25(20mm graded crushed stone aggregate) for foundation including rafts, footings, foundation beams, plinth beams, bases for columns, etc, complete all as specified and directed.

M & L for RCC M-25 20 mm graded crushed stone aggregate Slabs supported on walls,beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and the like etc complete all as specified and directed

M&L for TMT bars 10 mm dia & over cut to length, bent to shape required including cranking bending spirally for hooping for column, hooking ends & binding with & including mild steel wire (not less than 0.9 mm dia) or securing with clips quality conforming complete all as specified and directed

M&L for TMT bars 6mm to 8mm dia cut to length, bent to shape required including cranking bending spirally for hooping for column, hooking ends & binding with & including mild steel wire (not less than 0.9 mm dia) or securing with clips quality conforming complete all as specified and directed

M&L flat form work to sides of concrete foundations, footing bases of columns, raft and raft beams, sides and soffits(if any) of foundation and plinth beams and similar work, veritical or to batter rough finished flat surface of concrete complete all as specified and directed

M&L form work to sides of pillars posts, struts piers, columns & stanchions square rectangular or polygonal for fair finished flat surfaces of concrete complete all as specified and directed

M&L for 18 -20mm thick Black Granite/Lakha red RED Granite factory made bull nosed, polished (table rubbed and polished) as in jambs, window cills, cooking platform and the like etc and jointed in premium epoxy grout (Kajaria KE-100 or equivalent) to match the colour of tiles and including bedding of average thickness 6mm thick premium tile adhesive kajaria CX-1 or equivalent for laying of tiles on brick/concrete surface pigment to match with shade of stone including rubbing and polishing over and including 10 mm thick rendering in cement mortar 1:4 including rounding of edges complete all as specified and directed.

Suppiled and fixed in repair for stainless steel letters 10mm thick of 300mm in height/length of any shape in english eighter in hindi,fixed to floors or in vertical surface as in top of gate or, complete all as specified and as directed by the Engr-in-Charge.

Taking down of cement plaster of any description from brick or stone wall etc. including raking out of joints, hacking for key, scrubbing down with water etc complete all as specified and directed

M & L for 15 mm thick rendering on fair/other than fair faces of brick or concrete surfaces with cement mortar 1:6 finished even and fair complete all as specified and directed.

M & L for applying 15 mm thick rendering using CM 1:4 on brick / concrete surfaces of external walls finished even and fair complete all as specified and directed.

Material & Labour for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm and a thin layer of putty over new surfaces using roller for painting complete all as specified and directed

Preparation of Old plastered surface of wall by applying two coat of cement base paint with primer and incl one coat of putty wherever required existing finish complete all as specified and directed

M & L for preparation of old painted surfaces of steel and iron work of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed

Demolition of brick work or stone/boulder masonary built in cement mortar incl all quoins arches pillars etc complete all as specified and directed

M & L for Type D2 1:4:8 (40 mm graded crushed stone aggregate) Cement concrete in in foundations, filling and mass concrete complete all as specified and as directed.

M & L for brick work with fly ash bricks straight or curved on plan exc 6 m mean radis built in CM 1:6 complete all as specified and as directed.

All as per item no 23 above but except bricks complete all as specified and directed

M&L Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:4 complete all as specified and as directed.

M & L for Type B0 1:2:4 (12.5mm graded aggregate) Providing precast cement concrete louvres and jallies, 25mm thick (measured solid including reinforcement), Set in cement mortar 1:4 including dismantling of old lovvers and jallies etc complete all as specified and as directed.

M& L for Broken glass coping on top of walls built in CM 1:6 bricks complete all as specified and as directed.

M & L for crushed stone providing precast cement concrete in window or door cills, lintels,bressumers, steps,quoin blocks (for use with ma sonry), string courses, copings.kneelers, apex stones, pier caps,columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone walling). corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throat- ing etc. and setting in mortar complete with joints to match complete all as specified and directed

M & L for PCC Type C-2 1:3:6 (40 mm graded crushed stone aggregate) Cement concrete in surface channels and drains etc complete all as specified and as directed.

Extra for forming fair finished drain or channel 30 CM inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc complete all as specified and directed

Demolition for Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

M & L for Cement concrete type D- 2, 1:4:8 (40mm graded aggregate) as sub base complete all as specified and as directed.

M&L machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 grade, with grey cement and pigment over and including 50mm thick river sand cusion and packing the edges/sides of the blocks with PCC 1:2:4. Make: Tulip infrastucture, jain industries or ISI marked complete all as specified and directed

M&L for chequered cement concrete colour tiles size 300mm cmx300mmx25 mm thick, with colour pigment, set, jointed and pointed in neat cement slurry over and including 20 mm thick screed bed in cm (1:6) complete all as specified. Make: Tulip infrastucture, jain industries or ISI marked complete all as specified and directed

Dismantling posts or struts (wood, steel or RCC) any section including taking out embedded portion and making good disturbed ground post embedded in natural ground complete all as specified and as directed.

Excavating in post holes(or similar holes) each n.exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, in soft/loose soil complete all as specified and directed

M&L for PCC 1:3:6 type C2 using 40mm graded stone agreegate as in bed blocks to fencing post complete all as specified and directed

S&F mild steel in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed

Dismantling fencing wire mesh, any type complete all as specified and directed

Supply only MS galvanised chain link fencing mesh complete all as specified and directed.

Fixings only chain link fencing including line wires, any mesh, size and type to standards, rails, straininng bolts etc including provision of binding wire complete all as specified and directed. Note : supply only chain link fencing, MS 10mm dia round bars as line wire and MS flat iron shall be measured and paid separately under respective item of this schedule.

S&F in repair galvanised 2 strand, steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of stanadard rails straining bolts including securing or tying at crossings with and provision of galvanised mild steel wire staples or steel pins etc complete all as specified and directed.

S&F mild steel screw bolts(machine made) exceeding 5cm and not exc 10cm long with diameter of shank 11 to 15mm with hexagonal or square heads at one end and screwed the other fitted with washer and one hexagonal or square nut complete alll as specified and directed.

Dismantling asbestos cement (corrugated, semi-corrugated, etc) sheet in roof coverings complete all as specified and directed

M&L for 6 mm thick fibre cement, corrugated or semi-corrugated shets in roofs, walls, etc. Fixed with L-type or J-type or cranked hook bolts including Dismantling of old sheet any description as in roof covering incl ridge and removing from site complete all as specified & directed.

S&F plain galvanised 0.63mm, MS sheeting as in ridges, crumple section, hips, valley gutters, drips and straight flashings ( length & girth as fixed) with grade of zinc coating 275 complete all as specified and directed

S&F pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed

S&F pre-painted galvatume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall/ridges etc, fixed with self tapping screws complete all as specified and directed

M&L for precast cement concrete type B1 1:2:4(20mm graded aggregate) block masonry with solid blocks exc.10 cm in width and setting in mortar complete all as specified and directed.

M & L for Type B1 1:2:4 (12.5mm graded aggregate) Providing precast cement concrete louvres and jallies, 65-70mm thick (measured solid) including reinforcement, Set in cement mortar 1:4 including dismantling old louvses or jallies etc complete all as specified and as directed.

M&L for Stone slab 25 mm to 35 mm thick dressed true and square, in one length not less than 60cm and n. exc 120cm in copings, window cills, chajjas, sunshades, etc., punched dressed on exposed edges rounded or chamfered as directed, set, jointed and pointed in mortar exposed edges rounded or chamfered as directed, set, jointed and pointed in cement mortar 1:4 complete all as specified and directed.

VIRAT CONSTRUCTIONS

AMBEY CONSTRUCTION

AEGIS INTERNATIONAL

M/S AMAR ELEKTRO CENTRE

A.V. ASSOCIATES

Shikha Enterprises

SA construction co.

Arun Construction Co.

Manglam Engineers and Construction Co

Gupta Automobiles