Repair and Maintanance Work For Slaughter House ( Aadu Vathai Koodam) at Ambalpuram in Pudukkottai i Municipality.

Amount

Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size boulders SS.20B and Sand, silt or other loose soil, wet sand,or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrock requiring blasting inclusive of shoring shuttering and baling out water and cleaning and levelling the site etc.,complete 10 cum

Plain Cement Concrete 1:4:8 (one cement four fine aggregates and eight coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification

Centering for soffits of PCC slabs of plane surface like lintels, beams ,etc.,including strutting 3m high using mild steel sheets of size 90cm X 60cm X and B.G 10 stiffened with M.S angles of size 25mm X 25mm X 3mm laid over silver Oak (C.W) joists of size 10cm X 6.5cm (spaced at about 90cm c/c )and supported dy casurina props of 10cm to 13cm dia (spaced of 75cm C/C) complying with standard specification and directed - 10 m 2 (P & D)Data 38

Plain Cement Concrete 1:2:4 (One part of Cement, two part of Crushed Sand (M- Sand), four coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification

Supplying and filling in foundation and basement with Well Gravel in layers of not more than 15cm thick well rammed watered and compacted etc., complete complying with standard specification.

Plastering with cement mortar (1:5) 12mm ,thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications (S.I.306)

Supplying and laying Rubberised interlocking Paver block M40 grade 83mm thick high strength type conforming IS 15658-2006 of rubberized interlocking paver lock in size of minimum compressive strength of 40N/mm2 in uniform shape of approved make to be laid in flurring bone pattern with stone dust cushion below the uniform shap of approved non skitting surface in the top and the rate including levelling the base preparation of pavers as sub base, stone dust cushion 150mm thick laying out of pavement cut the pieces to fix the edge vibring the pavers,sweeping tranporting loading unloading of laying paver block as per standard specification,.

Weathering course in brick jelly and lime concrete using broken brick jelly of size 20mm uniform gauge in pure slacked lime (no sand to by used) the proportion of brick jelly to lime being 32:12.5 by volume laid over the RCC roof slab in a single layer of required design, slope and finished thickness by beating the convrete with wooden and beaters of approved pattern keeping the surface constantly wet by springing lime jaggery water etc,. completer as per standard specification and as directed by the Engineer incharge

Finishing the top of roof with one course of machine pressed tlies of size (23x23x2 cm) approved quality in C.M.1:3-12mm thick mixed with water proffing compound confirming to IS @ 2% byl weingt of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification

Dadooing walls with Glazed tiles of sizes 305mm X 200mm X 6mm size of approved make and quality and colour Set in cement mortar 1:2 (One part of Cement and two part of Plastering Sand (P- Sand)) over 10 mm base layer plastering and pointing with white cement neatly as directed.

Paving the floor with design rajasthan kotta tiles (colour and shade as directed) of size 610mm x610mmx25mm in all floors over a base layer of cement mortar 1:3(one cement and three sand) 20mm thick laid in-situ and pointed with same coloured cement etc, complete as per standard specification

Painting the new walls two coats ove one coat of priming with best Emulsion paint of approved colour and quality including preparation of surface and finishing neatly etc., complete complying with standard specification and as directed by the department officers (S.I.NO.359-A)

Painting new iron works with two coats of approved quallity and color of synthetic enamel paint over the existing red oxide pri,er in all floor etc., complete as per standard specification.

Supply and fixing of PVC solid Doors with frame using 19gauge 19mm MS Sq.tubes for styles and frames, 15mm MS Sq.tubes for to, lock and bottom rails. The Steel tubes shall be convered with 5mm thick solid PVC sheets. Shutter using 5mm thick solid PVC sheets for panelling shall rigidly fixed in position including furniture and fittings. the over all size of styles shall be 50mmx30mm. the over all size of top rails lock rail and borrom rail shall be 75mmx30mm.the over all size of grames shall be 50mmx45mm with suitable tabate for housing the shutter.

providing & fixing PVC Rain Water Downfall pipe of followinng dia with necessary T.W.Clamps plugs, shoes,Bemds other clamps screws nails etc.,complete complaying with standard specification the rate is inclusive of cost of Removable Iron gratings of appropriate size. the size of teak wood plugs used is 150x25mm in front & 200x75mm in rear wall side with deapth of 110mm. The pipe is to be fixed by means of "U" clamps at the centre of pipe to the fixed.110mm dia PVC pipe[4Kg/sqCm]

Wiring with 2 x 1.5 sqmm (22 /0.3 ) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 3mm thick hylum sheet cover with TW switch box and 5A 3 pin non inter locking CS PLUG WITH PAINTING OF SUITABLE COLOUR WITH CONTINUOUS EARTH WISRE CONNECTION OF 14SWG TC wire for open PVC plug point SD 16

Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150mm x 100mm x 113mm TW switch box in flush with wall with 3mm thick hylem sheet cover for 15A 3 pin flush type non inter locking wall socket with 15A flush type switch with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open PVC power plug point.SD 35

Supply and run of 2 of 1.5 sqmm (22/0.3) PVC insulated SC unsheathed Cu. Conduetor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection 14 SWG TC wire with painting of sutable colour.(SD 52)

Supply and fixing of single box type 4'40W flu fitting complete with copper shoke and condensor with TW round blocks on wall or ceililng with flu tube with PVC unsheathed copper leads from terminals to the fitting SD 83

Supply and fixing of 1200mm (48") sweep AC ceiling fan complete with regulator with 1m down rod including S & F of fan clamp with side plates and corss arm SD 106

Supply and fixing in position indian water closet of size 580 x 440mm white glazed earthen ware of approved quality with 'p' trap or 's' trap confirming to IS:2556 - Part XII with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (one part of lime, two parts of sand and five parts of brick jelly) 100mm thick and finishing the top to required slope and including giving necessary connection to cast iron soil pipes/ PVC pipes by dismandling brick nasonry, reinforced cement concrete roof/floor slab and making good the disurbed portion to original condition without leakage etc., complete complying with standard specifications and as directed by the departmental officers. (The water closet should the got approved by the executibe engineer before use on works.)

Supply laying and jointing P.V.C pipes (6kg/sqcm) of approved quality and best variety conforming to I.S.S & with I.SI mark of the following sizes including citting, fizing to PRC specials using adhesive bt excluding cost of such specials and fixing to wall with necessary teak-wood plugs, PVC clamps and screws, making holes on the wall or drilling holes in roof and making good the dismantles portions o original condition with necessary brick work and plastering wherever necessary with necessary scaffolding charges.

32mm PVC Pipe

25mm PVC Pipe

20mm PVc Pipe

Drilling 150 mm dia borewell in hard rock area with a pilot bore of 150mm dia including labour charges for inserting casing pipe in the drilled bore.

Supply and delivery of pvc casing pipe AS PER IS 12818 / 2010

150 mm dia PVC Casing pipes

250 mm OD PVC Casing Pipes Assembly

Supply and delivery of Pumpset 15lpm x 125m head-1.5HP single phase submersible pumpset as per 8034/2002 without panel board including all cost and conveyance of all materials and labour charges etc. complete as per standard specifications

Erection of power pumps in borewell labour charges for erection of twin packer duplex type jet pumps in borewells upto 150mm dia including fixing of suction pipe regulating valves with jet assembly upto a maximum depth of 30m and delivery pipe valves pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN swithces starter,voltmeter, Ammeter, three indicator lamps capacitor and laying and jointing the canles and twin earthing as per IE rules etc., complete and testing the pumps and trail run for 10 days including signing of completion of reports as required by EB authorities and finishing the pipe holes including the foundation bolts, nuts and earth pits.

Single phase panel board with two level guard and auto start for 1.5HP motor including all cost and conveyance of all materials and labour charges etc. complete as per standard specifications

PVC insulated and sheathed 3 core flat type copper cable 2.5 sq.mm conforming to IS 694/1990

Supply and delivery of HDPE pipes and specials including all cost and conveyance of all materials and labour charges etc. complete as per standard specifications

32mm S.S hook

32mm S.S hoose collar

32mm HDPE pipe

Nylon Rope for Bore-well

GI Hex Nipple 32mm

32mm GI coupling

32mm GI Elbow

GI cover 150mm

M.s Bore clamp set

Construction of pedestal for HDPE tank including cost of 1000 lit tank etc

Construction of pedestal for kiosk including cost of kisk of size 0.75 x 0.45 x .75 etc complete

THIAGARAJAN (BID ID -1109470)