Chief Minister Development Fund

Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-in-charge. All kinds of soil

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)

Providing And Fixing Double Arch Swing Make of Arihant/ Kompan/ Koochie/ Hugo. The Arch Shaped Side Frame of the Double Arch Swing Is Made Up Of 80 Nb G.I Pipe and Top Pipe Is Made Up Of 50 Nb G.I Pipe. The Frame Is Powder Coated To Give An Aesthetic Look. Seats-Belt Type Seats Made Of Synthetic Rubberized Material/Fiber Reinforced Fabric Materials Of Virgin Reinforced Material. The Belt Seat Is Suspended On 6 Mm Rubber Coated G.I Chain. The Ball Bearings Are Mounted Inside A Specially Designed M.S. Clamp. All complete as per the technical specifications to manufacture the item. The Complete item to be fixed in C:C (1:2:4) block of size: - After deep excavation/earth work at site as required. All complete as per directions of Engineer-in- charge regarding material, shape of equipment, colour (of metal, seat and powder coating), and fixing of equipment etc. (The fixing charges of C:C block shall be paid separately All G I pipe to be used of make Apollo/ Jindal/ Tata with powder coating process.

Providing & fixing of Four Seater Arch Swing Mtr of Arihant/ Kompan/ Koochie/ Hugo. The four seater arch swing included 80NB Pipe bended & welded together form a strong frame with stand both the pitching & yawing moment. The flange & ISA 80NB pip is hot dip galvanized pipe of height 2900mm conforming to IS 1239 with GI thickness of 60m 50NB Top Pipe with two Arc Swing Flanges welded at both its ends. The Pipe can with standing tensional stress created due to swinging motion. These 50NB top pipes (2 nos. for Four Seater Arc Swing) are hot dip galvanized pipe of length 2950mm conforming to IS 1239 with GI thickness of 60 mm Special swing clamps made up of two parts are joined together with M6 Allen bolts along with S-Hook & a specially designed swing pin. The SHook is specially designed to house a bearing for smooth & noiseless swinging. The clamps are made from injection moulded Nylon-6, plastic, S-Hook of dia 8 mm & 145x130 Triangular hook, Grade SS 304 Rubber dip moulded swing chain of dia. 6mm & 1450mm Long. Moulded Rubber Seat tested for testing rubber hardness as per Shore Durometer Type A scale conforming ASTM D2240 having value of approx. 50. All complete as per the technical specifications to manufacture the item. The Complete item to be fixed in C:C (1:2:4) block of size: - After deep excavation/earth work at site as required. All complete as per directions of Engineer-incharge regarding material, shape of equipment, colour (of metal, seat and powder coating), and fixing of equipment etc. (The fixing charges of C:C block shall be paid separately All G I pipe to be used of make Apollo/ Jindal/ Tata with powder coating process.

Providing & Fixing Double Post Swing of Arihant/ Kompan/ Koochie/ Hugo. The leg supports of the single post swing is made up of 100 NB while the top bar is of 50 NB powder coated GI pipes (Must be min in G I “B” class pipe). The two swings are made up of 10 mm thick skid reinforced. The seats of the single support swing are made up of 10 mm thickness rubber with anti-skid. The rubber seat is suspended on 6 mm thickness GI chain. The ball bearings are mounted inside a specially designed GI clamp. All complete as per the technical specifications to manufacture the item. The Complete item to be fixed in C:C (1:2:4) block of size: - After deep excavation/earth work at site as required. All complete as per directions of Engineer-incharge regarding material, shape of equipment, colour (of metal, seat and powder coating), and fixing of equipment etc. (The fixing charges of C:C block shall be paid separately All G I pipe to be used of make Apollo/ Jindal/ Tata with powder coating process.

Providing & Fixing S Bridge Ladder of Arihant/ Kompan/ Koochie/ Hugo. Item Descriptions • Product Area : 4.3m x 2.4m (14ft x 7.9ft) • Safe Play Area : 5.3m x 3.4m (17.4ft x 11.2ft) • Age Group : 4-12 yrs • Friends at a time : 3-4 Technical Specification: •S-Bridge top frame: Two ISF 50x5, 500mm long conforming to IS 1730-1961 welded in between two 25NB hot dip galvanized bend pipe 2300mm & 3810mm long respectively. The ISF 50x5, 130mm long 4nos. with holes is welded to bend pipes for fixing the support pipes. The 20NB GI pipes 400mm long 17nos. equally spaced are welded between two bend pipes. •Support Pipe: 40NB hot dip galvanized pipe 2550mm long with 150x150x5mm GI base plate & 130mm long ISF 50x10 conforming to IS 1730- 1961 welded at the bottom & top ends of pipe respectively •Ladder Frame: ISF 50x10, 500mm long conforming to IS 1730-1961 & ISA 25x25x5 conforming to IS 808-1964 welded in between two 40NB hot dip galvanized pipe 2550mm long. The four 25NB GI pipes 400mm long equally spaced at 300mm forming ladder steps are welded between two pipes. •Pipes: All metal pipes are Hot Dipped Galvanized Pipes with GI thickness of 60micron. •Powder coating: shall be done of pure polyester exteriors ultra-stabilized powder Paints. Thickness maintained is a minimum of 60-70microns. •Nut and Bolts: Galvanized/ S.S./Allen Bolt/Button Head Allen Bolt & Nuts / Nylon Lock Nuts are used with PVC Bolt Caps. All open ends of pipe been closed by GI / PVC caps for user safety against entrapment. •Pipe Materials or Class: Medium Duty ('B' Class). Certificate: ISO9001:2015 Color: Multicolor for optional or customized Packaging: Safety 3 layer packaging like 1st EPE Foam 2nd HDPE Film and 3rd is Stretch wrap. All complete as per the technical specifications to manufacture the item. The Complete item to be fixed in C:C (1:2:4) block of size: - After deep excavation/earthwork at site as required. All complete as per directions of Engineer-in- charge regarding material, shape of equipment, colour (of metal, seat and powder coating), and fixing of equipment etc. (The fixing charges of C:C block shall be paid separately All G I pipe to be used of make Apollo/ Jindal/ Tata with powder coating process.

Providing & Fixing Wave Ladde of Arihant/ Kompan/ Koochie/ Hugo.MAIN BODY :-32 MM N B GI PIPE. SUPPORT :- 25 MM NB GI PIPE. THE TOPCOAT IS DULY POWDER COATED. It Shall Have Main Frame Made Of 32 Mm G.I Pipe With Steps Made From 25 Mm G.I Pipe The Pipes Shall Be Powder Coated To Prevent Rusting And For Aesthetic Look. Coating With Pure Polymer Powder With 7 Tank Treatment 60 To 70 Micron Thickness. The Holding Down/Fixing Of Equipments Shall Be Emboded In Cement Concrete In The Ratio Of 1:2:4 (1cement : 2 Coarse Sand :4 Stone Agg. 20mm Nominal Size) All complete as per the technical specifications to manufacture the item. The Complete item to be fixed in C:C (1:2:4) block of size: - After deep excavation/earth work at site as required. All complete as per directions of Engineer-in- charge regarding material, shape of equipment, colour (of metal, seat and powder coating), and fixing of equipment etc. (The fixing charges of C:C block shall be paid separately All G I pipe to be used of make Apollo/ Jindal/ Tata with powder coating process.

Providing & Installing Sea Saw Double of Arihant/ Kompan/ Koochie/ Hugo . Size 2.0x2.50mtr.Main Frame: Made Of See Saw Made Of 50mm Nb Pipe With Planks Made Of 40mm Nb Pipe And Supports Made Of 20mm Nb. Pipe, All The G.I Pipes Should Be "B" Class & Isi Marked (As Per The Is 1239/2004)& Of Reputed Brand Make & Ensuring The Strength, Durability, Stability & Long Life To The Kids Structure With Safety As Paramount. Seats - Seat Made Of Roto Moulded , Duly Uv Resistant Colors, The Complete Structure See Saw Double Should Be Powder Coated With Minimum Powder Coating Thickness Of 60-80 Microns Accessories: Nut Bolts- All Approved G.I Nut Bolts Galvanized Iron With High Tensile Strength Kid Capacity -4 Nos. Complete As Per Drawings Attached. All complete as per the technical specifications to manufacture the item. The Complete item to be fixed in C:C (1:2:4) block of size: - After deep excavation/earth work at site as required. All complete as per directions of Engineer-in- charge regarding material, shape of equipment, colour (of metal, seat and powder coating), and fixing of equipment etc. (The fixing charges of C:C block shall be paid separately All G I pipe to be used of make Apollo/ Jindal/ Tata with powder coating process.

Providing & Installing Roto Wave Slide of Arihant/ Kompan/ Koochie/ Hugo. Wave Slide 3.10 Mtr. : This Roto Wave Slide Consists Of Isi Marked Structure. The Attractive Roto Wave Slide Chute Is Made Up Of 8 Mm Thick LLDPE virgin Plastic Material. The Structure Is Made Up Of 20 Nb And 25 Nb Powder Coated G.I Pipes. The Slide Is Supported On 80 Nb Powder Coated G.I Pipes. The Ladder Cum Railing Is Made 20 Nb And 25 Nb G.I Pipes Respectively. The Platform of the Slide Is Made Up Of 14 Swg G.I Sheet with Anti-Skid for Firm Foot Grip. There Are Triangular Steps 16 Swg G.I Sheet. The Slide Chute Has Its End Such As It Causes Safe Landing of The Child. All complete as per the technical specifications to manufacture the item. The Complete item to be fixed in C:C (1:2:4) block of size: - After deep excavation/earth work at site as required. All complete as per directions of Engineer-in- charge regarding material, shape of equipment, colour (of metal, seat and powder coating), and fixing of equipment etc. (The fixing charges of C:C block shall be paid separately All G I pipe to be used of make Apollo/ Jindal/ Tata with powder coating process.

Providing & fixing of Mini Wave Slide of Arihant/ Kompan/ Koochie/ Hugo. The center support of the Mini Slide is made up of 50 NB GI pipe. The slide is made from Fiberglass reinforced plastic (FRP). The thickness of the mini slide is 3-4 mm with proper reinforcement to support the module. The triangular steps of 16 SWG are provided and the ladder frame is made in 20 NB and 25 NB powder coated GI pipe. The landing support is made up of 25 NB GI pipes. The ladder is designed in such a way there won’t entrap child’s foot while playing. The pure polyester powder coating done on the pipes extends the life of equipment ll complete as per the technical specifications to manufacture the item. The Complete item to be fixed in C:C (1:2:4) block of size: - After deep excavation/earth work at site as required. All complete as per directions of Engineer-in- charge regarding material, shape of equipment, colour (of metal, seat and powder coating), and fixing of equipment etc. (The fixing charges of C:C block shall be paid separately All G I pipe to be used of make Apollo/ Jindal/ Tata with powder coating process.

Providing & fixing of Roto SPIRAL SLIDE 2.1 MTR. of Arihant/ Kompan/ Koochie/ Hugo. the spiral slide is made up of fiber reinforced plastic in one piece having shell thickness of 3‐4 mm. The slide is supported on a center support of 80 NB GI pipe. The landing supports of the slide are supported by two 20 NB pipes. The slide ladder is made up of 25 NB GI pipe. The spiral slide railing is made up of 15 NB and 20 NB pipes respectively. The triangular steps of the ladder are made up of 16 SWG GI sheets. The safety railing of the ladder is made up of LLDPE in roto molding process. The trader and riser of the ladder are designed in such a way it won’t entrap child’s foot while playing. All the sharp edges and corners are properly grinded to give smooth finish so that children are not hurt while playing on it. All complete as per the technical specifications to manufacture the item. The Complete item to be fixed in C:C (1:2:4) block of size: - After deep excavation/earth work at site as required. All complete as per directions of Engineer-in- charge regarding material, shape of equipment, colour (of metal, seat and powder coating), and fixing of equipment etc. (The fixing charges of C:C block shall be paid separately All G I pipe to be used of make Apollo/ Jindal/ Tata with powder coating process.

Providing and fixing Multi Playing Equipment of Arihant/ Kompan/ Koochie/ Hugo . size 6.69x6.79x3.79m with following specification main pipe 114mm and 2.2mm thick GI pipe 1nos. Double slide with entry gate at 1200mm height 1 nos. Wave slide with entry gate at 1500mm height 1 nos. spiral slide at 1650mm height 1 nos. sunflower canopy 1nos. panel tree 1 nos. monkey pannel, 1 nos. flower 1 nos. butterfly are made of LLDPE rotational moulded multicolour virgin plastic UV, O2 & Anti-static resistant. 1 nos. Arc swing top pipe is 75 nb galvanized pipe with specially designed casted bearing assembly for friction free swing movement. with 2 nos. flat seat of swing made of PVC injection moulded with PVC coated chain suspension. 1 nos. Easy ladder at 1200mm height. All platforms are made up of 2mm thick glavanized sheet precision punched hole of 8mm dia. All nut bolts are of stainless steel. All metal parts are pure ployester powder coated minimum 40 microns. All plastic parts jointed with structure with the help of plastic clamp. The works has been completed as per instruction, direction and to the entire satisfaction of Engineer-in-charge. All complete as per the technical specifications to manufacture the item. The Complete item to be fixed in C:C (1:2:4) block of size: - After deep excavation/earth work at site as required. All complete as per directions of Engineer-in- charge regarding material, shape of equipment, colour (of metal, seat and powder coating), and fixing of equipment etc. (The fixing charges of C:C block shall be paid separately All G I pipe to be used of make

Please Enable Macros to View BoQ information