Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹20.2 LAccepted-AOC | L1 | Accepted-AOC Being L1. | |
| 2 | L2₹27.4 L+₹7.2 L (35.5%)Rejected-Finance PULWAMA JAMMU KASHMIR 192301 INDIA | PULWAMA | JAMMU AND KASHMIR | 192301 | L2 | Rejected-Finance Being not L1. |
| Sl No | Description | Qty | Unit | Gurjit const co L1 | Peerzada And Sons L2 |
|---|---|---|---|---|---|
| 1.00Note:- Rate quoted above all items inclusive provision as under : Making arrangement for establishment of centralized complaint centre in the existing building as under :- (a) Contractor shall be given user id and password for accessing the online complaint portal and contractor shall at his own expense by himself or his representative feed the data in r/o complaints so generated. (b) Manually registered complaints shall be obtained everyday from MES complaint cell and rectification or otherwise shall be intimated to JE in charge of the cell for updation of manual registers. (c) Provision and maintenance of all tools, plants, equipment and safely gear required for tradesmen under this contract.Contractor shall provided sufficent skilled and unskilled manpower on reqmt basis as directed by Engr-in-Charge for attending and completing the complaint. (d) Provision of communication and conveyance (as required) facilities to supervisor and tradesmen. (e) Monitoring and management of complaints report from generation to execution of complaint including pending complaints. (f) Updating status of lodged complaints on a daily basis. (g) Basic inputs to be noted from the complainants will be locality, Building No, Qtr No, Name and Rank of complaint and exact nature of complaint and mobile No/ telephone (j) On lodging the complaint, the Complaint No will be assigned for reference . Also system should indicate an approximate time for repairs. Accordingly a corresponding complaint slip shall be generated by the system with all relevant info. Complaint slip should be printed in triplicate and to be handed over immediately to Supervisor who shall detail appropriate tradesmen for repair with required materials/store. One copy of complaint shall be retained in complaint centre and two copies with tradesmen. (k) On both copies of complaint slip, status of the complaint attended shall be endorsed by the complaint/user. One copy to be retained by the complainant and second copy to be with tradesmen for handing over in the complaint centre. Reasons for non attending of complaint etc shall be recorded alongwith estimate of expected time to attend and rectifying the complaint. | |||||
| 1.01(l) At the end of each day, summary of complaints shall be prepared and generated indicating No of complaints lodged, attended in time, reasons for not attending , probable time required for attending the pending complaints etc; (m) JE in charge of MES will review the complaints recorded in the system daily and will carry out personal inspection of complaints attended and its status and will take remedial measures in this regard. (n) AGE will visit the complaint cell at least twice a week to check the efficacy of the system and record their remarks accordingly. Space for complaint cell/Office & Store will be Provided by the Department. (o) Complaint will be addressed within 48 hour failing to this penality will be imposed as per CA Clause. (p) All tradesmen shall be dressed in a common uniform and quoted rates should be inclusive of that. Tradesmen not wearing uniform shall not be allowed in the gate and any loss on that account shall be attributable solely to the contractor. | |||||
| 2.00 | Taking down and refixing of shutter of any description area exceeding 1 Sqm but n exc 2 sqm each, after easing, tightening pins etc to ensure smooth operation of shutter complete all as specified and directed. | 50 | Each | 150 ₹7,500 Lowest | 180 ₹9,000 |
| 3.00 | Resecuring or easing and adjustment without taking down the shutter of any description exc 2 sqm each complete all as specified and directed. | 35 | Each | 150 ₹5,250 Lowest | 155 ₹5,425 |
| 4.00 | S&F in repair galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width 1.00 mm and fixed with tinned tacks of galvanised wire stapple etc wooden/filletscomplete all as specified and directed. | 200 | Sqm | 300 ₹60,000 Lowest | 525 ₹1,05,000 |
| 5.00 | Hacking out old broken glass (any thickness, size quality or description) from wooden or steel frame glazed with putty or fixed with beads complete all as specified and directed. | 230 | Sqm | 10 ₹2,300 Lowest | 25 ₹5,750 |
| 6.00 | S&F 3.00 mm thick Plain sheet glass, one side sheet glass is groundor obscured or frosted in squares n exc 0.5 sqm each pane and glazing with oil putty all as specified all as specified and directed. | 200 | Sqm | 600 ₹1,20,000 | 550 ₹1,10,000 Lowest |
| 7.00 | S&F 4mm thick figured glass, pin head type and glazing with oil putty in square exc 0.50 sqm in each pane complete all as specified and directed.
. | 30 | Sqm | 650 ₹19,500 Lowest | 650 ₹19,500 Lowest |
| 8.00 | S&F in repairs aluminium tower bolt 200mm with bright bolt and fixed cocomplete all as specified and directed. | 20 | Each | 60 ₹1,200 Lowest | 115 ₹2,300 |
| 9.00 | S&F in repairs 250mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. | 20 | Each | 250 ₹5,000 Lowest | 255 ₹5,100 |
Tender Value
₹25 L
EMD Value
₹50,000
Closing Date
28 May 2026, 6:00 pmClosed
Hans Ram Meena, IDSE
GE Kapurthala
Comprehensive repair to certain building for day to day maintenance at Zone D under GE Kapurthala
2026_MES_759348_2
8127/E8
Open Tender
Civil Works
Item Rate
304 days
GE Kapurthala
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GE Kapurthala
₹50,000
30 Jun 2026
16 May 2026
30 May 2026
16 May 2026
28 May 2026
22 May 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1.01 | (l) At the end of each day, summary of complaints shall be prepared and generated indicating No of complaints lodged, attended in time, reasons for not attending , probable time required for attending the pending complaints etc;
(m) JE in charge of MES will review the complaints recorded in the system daily and will carry out personal inspection of complaints attended and its status and will take remedial measures in this regard.
(n) AGE will visit the complaint cell at least twice a week to check the efficacy of the system and record their remarks accordingly. Space for complaint cell/Office & Store will be Provided by the Department.
(o) Complaint will be addressed within 48 hour failing to this penality will be imposed as per CA Clause.
(p) All tradesmen shall be dressed in a common uniform and quoted rates should be inclusive of that. Tradesmen not wearing uniform shall not be allowed in the gate and any loss on that account shall be attributable solely to the contractor. | - | - | - | - |
| 2 | Taking down and refixing of shutter of any description area exceeding 1 Sqm but n exc 2 sqm each, after easing, tightening pins etc to ensure smooth operation of shutter complete all as specified and directed. | 50 | Each | - | - |
| 3 | Resecuring or easing and adjustment without taking down the shutter of any description exc 2 sqm each complete all as specified and directed. | 35 | Each | - | - |
| 4 | S&F in repair galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width 1.00 mm and fixed with tinned tacks of galvanised wire stapple etc wooden/filletscomplete all as specified and directed. | 200 | Sqm | - | - |
| 5Hacking out old broken glass (any thickness, size quality or description) from wooden or steel frame glazed with putty or fixed with beads complete all as specified and directed. | |||||
| 6 | S&F 3.00 mm thick Plain sheet glass, one side sheet glass is groundor obscured or frosted in squares n exc 0.5 sqm each pane and glazing with oil putty all as specified all as specified and directed. | 200 | Sqm | - | - |
| 7 | S&F 4mm thick figured glass, pin head type and glazing with oil putty in square exc 0.50 sqm in each pane complete all as specified and directed.
. | 30 | Sqm | - | - |
| 8 | S&F in repairs aluminium tower bolt 200mm with bright bolt and fixed cocomplete all as specified and directed. | 20 | Each | - | - |
| 9 | S&F in repairs 250mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. | 20 | Each | - | - |
| 10 | S&F in repairs 300mm MS ordinary rat tail rod pattern springs including roller and roller plate complete (Helical door spring) welded to steel chowkats complete all as specified and directed. | 10 | Each | - | - |
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.25 MB
BOQ_857605.xls
BOQ • 1.00 MB
TENDER_8127-R.pdf
Tender Documents • 1.60 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .