Repair and Renovation and allied Works of G-B Boys Hostel Poonch

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc.complete.

Providing and applying white cement based putty of specified thickness,of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.1 mm thick

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer

Painting with oil type wood preservative of approved brand and manufacture on old work (one or more coats)

Taking out existing wooden door shutter, repair by cutting, painting etc.and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge.

Providing and fixing 35mm thick wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge :Second class Kail wood

Renewing glass panes and re-fixing existing wooden fillets: Float glass panes of thickness 4.0 mm (weight not less than 10kg/sqm)

Dismentling of existing ply board ceiling including removal of batten wooden frame work nails screw etc carefully lowered stacked and disposal off within department premises as direction by Engineer-in-Charge

Providing and fixing false ceiling of 8mm thick commerical ply board fixed on wooden battens/GI frame work at required spacing,including cutting drilling nailing/screwing,complete with primer coat all lead and lifts as per direction of Engineer-in-charge

Dismantling wood work in frames, trusses, purlins and rafters upto 10 meters span and 5 meters height including stacking the material within 50 meters lead :Of sectional area below 40 sqcm.

Renewing wooden beams in roofs, including making good the holes in wall and painting with oil type wood preservative of approved brand and manufacture complete, including removal of rubbish to dumping ground within 50 meters lead :Above 4.00 meters and up to 5.00 meters length.Sal wood beams

Providing hoisting and fixing trusses/purlins /rafters/posts/ post-plates or like components including cost of screws etc. Complete.First class Budloo/Fir wood

Providing and fixing plained eaves boarding. 2nd class Deodar wood 300x40 mm (nominal size)

Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia wire and 1.4 mm wide aperture with matching wood beading.12 mm thick Fire retardant plywood conforming to IS: 5509

Dismantling roofing including ridges, hips valleys and gutters etc., and stacking the material within 50 meters lead of : G.S. Sheet

Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I.limpet and bitumen washers complete.0.63 mm thick with zinc coating not less than 275 gram/m2

Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.0.63 mm thick with zinc coating not less than 275 gram/m2

Painting on G.S sheets with synthetic enamel paint of approved band and manufacture of required colour to give an even shade on New work (two or more coats) including a coat of approved steel primer but excluding a coat of mordant solution.

Providing and fixing ISI marked oxidized M.S. tower bolt black finish, (Barrel type) with necessary screws etc complete.100x10 mm

Providing and fixing ISI marked oxidized M.S. tower bolt black finish, (Barrel type) with necessary screws etc complete.150x10 mm

Providing and fixing ISI marked oxidized M.S. handles conforming to IS : 4992 with necessary screws etc. complete :75 mm

Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931

Providing and laying 10mm thick, l cement: 3 fine sand mortar slurry'on beds and side slopes (prior to laying In-situ concrete lining)

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

Wiring for light/power plug with 2x4 sq mm FRLS PVC insulated copper conductor singel core cabel in surface/recessed medum class PVC conduit alongwith 1 no 4sq mm FRLS PVC insulated coopper conductor singel core fol loop earth as req.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

2 X 6 sq. mm +1x6.0 sq. mm earth wire

2x10.0 sq.mm+1x6.0 sq.mm earth wire

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

5/6 A switch

15/16 A switch

3 pin 5/6 A socket outlet

6 pin 15/16 A socket outlet

Supply and fixing suiutable size of GI box with modular plate and cover in forent of surface or in recess,including providing and fixing 2 nos. 5/6 A modular socket outlet and 2 nos. 5/6 A modular swuitch, ,connection etc as rwq. (for light plug to be used in non residential buldings)

Supply and fixing suiutable size of GI box with modular plate and cover in forent of surface or in recess,including providing and fixing 6 pin 15/16 A modular socket outlet and 15/16 A modular swuitch, ,connection etc as rwq.

Supply and fixing of following size class pvc conduit along with accessories in surface/recessed include cutting the wall and making good in the same case in recessed conduit as req.25mm

Supply and and fixing of two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supply and fixing of modular blankinng plate on exiting modular plate & switch box exculding modular plate etc as req.

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.

3 Module (100mmX75mm) 15 nos

6 Module (200mmX75mm) 10 nos

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required

Single pole

Singel pole and neutral

Supply and fixing 3 pin. 5 A celling rose on the exisiting junction box/woden block including connections etc as req.

Providing and fixing of LT swuitch gear power control panel floor mounted outdoor type totally enclosed compartmentalized,cubical made of 2mm thik sheet duly powder coated free from dents dust uneven surface and vermin as per techinical specificication suitable for 415 volt 3 phase 4 wire 50 HZ AC supply complete with hinged door having looking arrangment with provision of space for MCCB. COS. din bar for 15 spn the job includer interconnections teasting commessoning and providing earthingconnections,to panel.

MCCB FP.400 Amp 36 KA ICU=ICS=100%

Change over switch FP 200 Amp

MCCB TP 63 Amp 16 KA

Supply and fixing horizontal type three pole and neurtal sheet steel MCB db bord 415 volt on surface /recessed complete with tinned copper bus bar netural bus bar 'din bar. Interconnection powder paintedincluding earthing etc.as req.6way(4+18) DD

Laying ofone no PVC insulated and PVC sheathed /XLPE powre cabel 1.1 KV grade of following size cabel direct in ground including excavation and refilling the trench etc as req.300 mm 3.5 C

Supply and fixing of following electrical items

A/B holder

1400 mm swip celling fan

T-5 led tube 20 Watt

LED lamps 7/9 watt

Exghust fan 300 mm