REPAIRS TO FOOTPATH, GATE PILLAR, ROAD FURNITURE, ROAD REPAIR AT AREA UNDER GE MCEME SECUNDERABAD

Amount

Repair to potholes any depth, not exc 1 sq m each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth making good by applying tack coat @5kg/10sqm, putting in premixed bituminous mecadam, well rammed and sealed with binder 9.8kg per 10 sqm, blinded with 0.09cum of stone chippings, 6.3mm size and again well rammed (including supply of premixed macadam, binder and chippings) depth of potholes exc 30mm, complete all as specificed and directed by Engineer-in-Charge.

M&L for preparing existing black top surface by burshing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surfce with gunney bags to remove all loose dirt etc and applying evenly a priming/tack coat with bituminous primer at 5kg per 10 Sqm using paving bitumen VG-30 grade, complete all as specificed and directed by Engineer-in-Charge.

M&L for bituminous premix semi dense asphaltic concrete 30mm consolidatd thickness with 5.5% binder content by weight of total mix using paving bitumen VG-30 grade rolled and compacted to requied camber and gradient complete to a uniform surface, complete all as specificed and directed by Engineer-in-Charge.

M & L for preparing bituminous surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc. and the like n. exc 10cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction, complete all as specificed and directed by Engineer-in-Charge.

M&L one coat painting lines, dashes, arrows, letters, etc. on roads, pavements and the like exc 10cm wide with road marking paint, white or golden yellow, complete all as specificed and directed by Engineer-in-Charge.

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) , complete all as specificed and directed by Engineer-in-Charge.

M&L for cement concrete type B- 0, 1:2:4 (12.5mm graded aggregate) for coping or chamfered on edges including necessary form work, complete all as specificed and directed by Engineer-in-Charge.

Supply and fixing in repairs cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions, including dismantling old, complete all as specificed and directed by Engineer-in-Charge.

M/S DIVIJA BUILDERS

M/S B.SHRAVAN KUMAR

K CHANDRAPAL REDDY

Sri Associates