Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹9.9 LAccepted-AOC | L1 | Accepted-AOC lowest bidder | |
| 2 | L2₹10.8 L+₹76,755 (7.62%)Rejected-Finance | L2 | Rejected-Finance Other than lowest Bidder | |
| 3 | L3₹11.0 L+₹89,190 (8.86%)Rejected-Finance C O HILL HARDWARE STORE P R HILL KOHIMA NAGALAND | PHEK | NAGALAND | 797104 | L3 | Rejected-Finance Other than lowest Bidder |
Tender Value
₹9.6 L
EMD Value
₹19,300
Closing Date
13 Sept 2024, 6:00 pmClosed
AGE (I) Zakhama
C/o 792 FPO PIN-900792 C/O 99 APO
REPAIRS / REPLACEMENT/MAINT OF LT PANELS, UG CABLES AND ALLIED WORKS AT ZAKHAMA MILITARY STATION UNDER AGE(I) ZAKHAMA
2024_MES_659462_2
8265/E8
Open Tender
Civil Works
Item Rate
180 days
AGE (I) Zakhama
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
AGE (I) Zakhama
₹19,300
5 Oct 2024
26 Jul 2024
16 Sept 2024
26 Jul 2024
13 Sept 2024
2 Aug 2024
Amount
Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth for laying cables, foundation for pole, etc and getting out in hard/dense soil complete all as specified and as directed.
Returning, filling in, including spreading, levelling, watering and well ramming of soil in layers n. exc 25cm thick complete all as specified and as directed.
Removing excavated soil to distance n. exc 50m and depositing where directed at a level n. exc 1.5m above the starting point complete all as specified and as directed.
S&F in repair 1.5 Sqmm, 3 core Pvc Insulated & Sheathed Copper Flexible Cable Black including conduit pipe complete all as specified and directed .
M & L for cutting the existing hard standing/PCC/WBM road at a depth not less than 30 cm and 15 cm wide for passing of cable through GI pipe returning filling in complete including finishing the surfaces by providing cement concrete (1:2:4) type B2 using 40mm grade stone aggregate) upto 20cm depth,finishing to a uniform smooth surface to match the existing surface complete all as specified and directed. Note - GI pipes shall be measured and paid seprately under relevant item of this schedule.
S & F wall mounted Busbar chamber made of ETP grade copper of capacity 200 A , 4 Way with suitable enclosure and connected accessories, clamps, MS stand with PCC if required, nuts and bolts ,earth work etc, Complete all as specified and as directed. Make -Havells / L&T / ABB / Legrand / Schnieder
S & F in reapirs MCCB 4 Pole, 415 V, Adjustable type, 160 Amps with breaking capacity 36 KA with necessary connections, lugs, thimbles incl taking down old one, complete all as specified and as directed.
S & F in reapirs MCCB 4 Pole, 415 V, Adjustable type, 250 Amps with breaking capacity 36 KA with necessary connections, lugs, thimbles incl taking down old one, complete all as specified and as directed.
S & F in reapirs MCCB 4 Pole, 415 V, Adjustable type, 400 Amps with breaking capacity 36 KA with necessary connections, lugs, thimbles incl taking down old one, complete all as specified and as directed.
S & F in reapirs MCCB 4 Pole, 415 V, Adjustable type, 630 Amps with breaking capacity 50 KA with necessary connections, lugs, thimbles incl taking down old one, complete all as specified and as directed.
Supply, install, testing and commissioning of OUTDOOR FIDDER PILLER PANEL BOARD - IP55 RATING 3MM SHEET - POWDER COATED including suitable PCC if required (1:3:6) type C-2 foundation and necessary and earth work incl taking down old one complete all as specified & as directed with & incl the following accessories :- 250A COPPER BUSBAR - 3SETS INSTRUMENTATION SYSTEM:- (a) Indicator lamp with internal circuit (230/240V) & cluster LED (Red, Yellow, Blue) - 01 Set. (b) Danger notice plate of size 20 x 15 cm of 1.6 mm thick mild-steel sheet, vitreous enameled white, with letters, figures and conventional skull and bones in signal-red colour and fixed with MS clamps, bolts and nuts of approved size, for LT conforming to IS-2551 - 01 Nos (Front ). NOTE :- (i) Design / drawing / BOM of the Panel Board showing the dimensions is to be obtained from the manufacturer / Supplier & is to be got approved from AGE(I) before placing final order to the manufacturer. (ii) Anything missed out in the technical specifications but technically required for efficient working is deemed to be included in the quoted rates. (iii) Rates are inclusive of taking out old existing LT feeder pillar box by disconnecting all electrical connections. (iv) Rates are incl of PCC for base and foundation etc.
M & L for XLPE insulated, PVC sheathed, armoured, heavy duty electric under ground cable, with stranded aluminium conductor, 1100 Volts grade of size 95 sqmm 3½ core laid in trenches /floor or fixed on wall /pole in including brass compression cable glands, terminal lugs etc, including taking down old unserviceable UG cable any type complete all as specified and as directed.
M & L for XLPE insulated, PVC sheathed, armoured, heavy duty electric under ground cable, with stranded aluminium conductor, 1100 Volts grade of size 50 sqmm 3.5 core laid in trenches /floor or fixed on wall /pole in including brass compression cable glands, terminal lugs etc, including taking down old unserviceable UG cable any type complete all as specified and as directed.
Supply and spreading clean dry river sand in cable trenches as in cable cushioning complete all as specified and as directed. (Note: Punned thickness shall be measured and paid)
Supply and laying well burnt sub class ‘B’ bricks locally available best quality laid dry in trenches for protection of underground cable all as specified and directed
M&L for GI pipe light grade 80mm bore with all fittings laid in trenches or in floors, including taking up/ down old pipe complete all as speciffied and as directed.
S&F in repair for cable jointing kit for LT (Earthed) grade cable for end termination outdoor heat shrink type joint complete with jointing material and accessories suitable for for aluminium Conductor cable size 25-50 Sqmm 3.5/4 core complete all as specified and as directed.
S&F in repairs, for cable jointing kit for LT (Earthed) grade cable for end termination outdoor heat shrink type joint complete with jointing material and accessories suitable for for aluminium Conductor cable size 70-150 Sqmm 3.5/4 core complete all as specified and as directed.
M&L for earthing complete with galvanised iron earth plate electrode 600 mm x 600 mm x 6 mm thick, burried directly and preferably vertically in ground, earth pit not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 m below ground level connetcedusing galvanised iron strip 25×4mm as earthing lead by means of nuts, bolts, check nuts and washers made of galvanised iron or steel earthing lead to be protected by galvanised iron pipe of 15mm bore (light grade) and other end connected to earthing test point or lightening arrestor or main controlling switch as directed including providing funnel with 20mm bore galvanised iron pipe (medium grade), wire mesh, charcoal or coke and common salt in alternate layer of 15cm (compacted thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1 (with 20mm graded aggregate), 50mm thick precast RCC (1:2:4) cover slab (re-inforced with 8mm dia TMT bar @ 15 cm C/C bothways and suitable handle made of 10mm dia) including necessary earth work in excavation, returning filling and removal of surplus earth upto a distance not exceeding 50 m etc all as shown on electrical plate No. 3 of MES Schedule Part-I(2009) including demolition of old earthing completion all as specified and as directed. Notes:- (i) Main earthing strip from earth plate electrode to test point upto length of 7.5 meters length shall deemed to be included in the unit rate quoted against this item. (ii) On testing after completion if the desired resistance is not obtained the contractor shall redo the earthing without any extra cost to the department.
S&F in repair 40 watt LED post top made in die-cast aluminium with innovative glare free indirect lighting distribution & IP65 protection incl necessary pipe of suitable dia and nuts and bolts with necessary conncetions etc, including taking down old light complete all as specified and as directed. Make Bajaj / Philips / Crompten / Havells / jaquer.
das enterprises (BID ID -3083966)
thepfuralie zutso (BID ID -3091250)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .