Special Repair works to 1 No. of SI and 16 Nos. of PC / HC Quarters at Arani in Thiruvallur District

Amount

24) Manufacturing & supply of steel windows (Weight basis)

39) Supplying and fixing Mild Steel grills as per the design approved to verandah enclosure or gate

40) Painting - New "wood work"

41) Painting - New "iron work"

52) Supplying, laying, fixing and jointing the following PVC pipes as per ASTM D - 1785 of schedule 40 a. 32mm dia

b) 25mm dia

c) 20mm dia

Electrical Arrangement 69) Supplying and fixing 15amps 3 pin plug type socket

74) Charges for assembling and fixing of ceiling fan

78) Earthing Station IS3043 (Type I)

Annexure 8.2.3.2) Standrasied concrete grade of M20 b. Ground Floor

c. First Floor

d. Second Floor

9.2.2) Brick work in C.M. 1:6 using chamber Burnt bricks of size 23 x 11.4 x 7.5 cm (9" x 4 1/2"x 3") c) In Second Floor

10.2.2) Brick work in C.M. 1:4 using chamber Burnt bricks of size 23 x 11.4 x 7.5 cm (9" x 4 1/2"x 3") 75 mm tk (B.P.) d In Second Floor

14.1.I Precast Cupboard slab 20 mm tk. a. Ground Floor

b. First Floor

c. Second Floor

16.6) Precast Jally ventilator 50mm tk.using standardised concrete mix M20 without vibrating charges b. First Floor

18.1) Formwork using M.S.Sheet c. For Square and rectangular columns and small quantities

21.5.2.2) Supply and Fixing Soild UPVC door Shutter with frame

21.6.2.1) Supplying and fixing Monolithic RCC door frames a) For door size 900x2100 mm

22.1.7) Supplying and fixing of Best Indian Teakwood panelled door shutters single leaf b. 900 x 2100 mm

22.5.1) Supplying and fixing of following Aluminium furniture fittings (ISI) make a) Aldrops of 200mm long and 12mm dia with required screws, bolts and nuts

b) Butt Hinges with Nylon Washers of 100mm x 30mm (with required screws)

23.1.8)) Supplying and fixing of Best Indian T.W. single leaf door shutters using 9mm thick phenol bonded BWR b) 900 x 2100 mm

23.2.1) Supplying and fixing of 4mm thick pin headed glass

32.1.1) Finishing top of roof with one course of Hydraulic Pressed Tiles of approved superior quality of size 23cmx 23cmx20mm thick

32.1.2) Pointing the Pressed Tile over the roof with cement mortar 1:3

33.2.1) Plastering in C.M. 1:5, 12 mm thick.

35.2.1) Special ceiling plastering in cement mortar 1:3 10mm thick

37.3.1) White washing two coats using clean shell lime slaked

43.1) Fabrication of Mild steel / RTS grills (without cement slurry) for all sizes of rods.

44.6) Supplying and fixing of 110mm dia PVC SWR pipe with ISI mark confirming to IS 13952:1992- type 'A' for Rain water down fall pipe

50.6.1) Precast slab 50 mm tk.in C.C. 1:3:6 with fibre

51.2) Supplying and fixing of PVC water tank of capacity 1000ltr

51.8) Supplying and fixing of PVC water tank LID

52.9) Supply and fixing of 40mm dia MS clamp set

54.1.1) Supplying and fixing of half turn C.P Long body Tap of 15mm dia

54.2.1) Supplying and fixing of half turn C.P short body Tap of 15mm dia

56.4.1) Supply and fixing of of Indian Water closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR grade ' P' or "S' trap- Other than G.F.

57.1.1) Supplying and fixing of E.W.C.(White) 500 mm with PVC SWR grade "P" or "S" trap

58.3) Supplying and fixing the following dia PVC (SWR) pipe with ISI mark confirming to IS 13952:1992- type 'B' a) 110mm SWR pip

b) 75 mm Pipe

64.1.1) Wiring with 1.5 sqmm copper PVC insulated unsheathed single core 1.1 K.V. grade cable 5 amps flush type switch [Open Wiring] a) Light point With Ceiling Rose

b) Light point With out Ceiling Rose

c) Point wiring for calling bell/buzzer with push type switch with required Buzzer.

65.1.1) Wirng with 1.5 sqmm copper PVC insulated unsheathed single core 1.1 KV grade cable FAN POINT controlled by 5 amps flush type switch (Open wiring)

67.1) Wiring 1.5 sqmm copper wire for open wiring for 5AMPS SOCKET at switch board itself

68.2.1) Wiring 1.5 sqmm copper wire for open wiring for 5AMPS SOCKET at convenient places

70.3.1) Supplying and Fixing of Battern Type Bakelite Holder for Lamp

70.5.2) Supply and fixing of 4' long 18 W Crystal Glass LED tube Light with fitting

71.7) Supplying and fixing of 32 amps double pole main switch with fuse

75.2) Supply and delivery of following Electric Ceiling fan with ISI mark with blades a) 48" Electric fan 1200mm sweep

77.5.1) Run of main with 2 wires of 1.5 sq.mm. PVC insulated single core multi strand fire retardant flexible copper cable(Open wiring)

77.7.1) Run off mains with 2 wires of 2.5 Sqmm copper PVC insulated unsheathed single core 1.1KV cable(Open Wiring)

82.3.1) SSupply and fixing of LED Street lighting luminaries suitable for fixing 25 watts LED lamp

151.3.1) Supply and laying of the following size of PVC LTUG aluminium armoured cable (below GL) a) 3.5 C x 70 sq.mm. PVC LTUG aluminium armoured cable

161.1.4) Supplying and fixing of brass cable gland suitable for following core sqmm PVC armoured LTUG cable a) 3.5 C x 70sq.mm. PVC LTUG aluminium armoured cable

162.2.1) Supplying and clamping of PVC armoured LTUG cable(Above GL) a) 3.5 C x 70 sq.mm. PVC LTUG aluminium armoured cable

171.2.8) Supply and Delivery of Submersible motor Pumpset with ISI mark IS8034 without Panel Board of capacity 20 LPM X 50m

171.2.9) Supply and Delivery of Three phase Openwell Submersible motor Pumpset 75LPM X 40m

180.2.1)Labour charges for laying of flat cable below ground level a) 3 core 4 sqmm PVC insulated and sheathed flat type copper cable .

180.2.2) Labour charge for laying of following PVC insulated and sheathed flat type copper cable (above GL) a) 3 core 4 sqmm PVC insulated and sheathed flat type copper cable .

207.3.5) Painting the Old walls with two coats of 1st class ready mixed plastic emulsion paint including thorough scrapping

207.4) Painting the old wood work with two coats of approved first class synthetic enamel ready mixed paint including thorough scrapping

207.4.2) Painting Two coats of Old Walls with ready mixed Exterior EMULSION PAINT of first class quality paint of approved colour and shade or other similar works,

207.6) Painting the Old Iron work with two coats of approved first class synthetic enamel ready mixed paint of approved quality including thorough scrapping

209.5.1) Clean removal of the old cement plastering both inside and outside from the existing walls of brick masonry

213) Dismantling the damaged brick works of cement mortar in all floors without affecting the adjacent structures

213.1) Supply and fixing of SFRC Manhole cover with frame with locking arrangements of size 600mmx600mm

216)Dismantling the existing pressed tiles and weathering course without affecting the structure

221.1) Removing the damaged broken door/window /ventilators

224.1) Dismantling the existing damaged RCC with out affecting the adjacent structures,

243.2.1) Dismantling the Brick jelly concrete, existing floor finishing etc., without affecting the structure and removing the damaged existing IWC

247.2.2) Cleaning of bathrooms and toilets including Removal of cobs, cleaning wall tiles, floor tiles, ventilators, taps, exhaust fan, water closets, wash basins, sanitary fittings

254.1) Two legged scaffolding using 15cm dia casurna props upto 13 mt ht

255.2) Supplying and fixing of LED Bulb for suitable for fixing it to pendent / bakelite battern holder a) 9watts LED bulb

255.6) Supplying and fixing of water tight Bulk head fitting suitable for 12 watts LED with guard,

467.1) Clearing the scrub jungle available in the site and removing

503.1) Supply and laying of required dia of Nylon rope

609.6) Supply and delivery of 150mm OD of PVC casing pipes (6kglcm2) as per IS 12818

609.6.1) Supply and delivery of 150mm OD ribbed screen pipes (6kglcm2)

609.6.3) Labour Charges for inserting PVC casing pipes assembly (with slots or without slots) i) l50mm dia casing pipes assembly

615.2.1) Labour charges for the erection of submersible pumpset in borewell/openwell a)Up to 5 Hp

615.3.1) Supplying and fixing of Star Delta starter confirming IS13947 of approved make suitable for three phase for submersible Pumpset a)Up to 2 Hp

b) Up to 1 HP

616.4.1) Supply of following HDPE pipes for Submerssible pump in Borewell class 5 a) 32mm dia

619.2.1) Supplying and delivery of following materials of best approved quality a. 32mm Gate valve

619.9) Supplying and fixing of following dia GM Non return Valve a.50mm dia GM Non-Return valve

707.2.1) Supplying and laying 3 core 4 sqmm Flat copper cable

740.1) Supply and delivery of 25Amps, 30 MA DP ELCB

799.1) Drilling of Borewell anywhere inculding transportation from one place to another place in alluvial soil or sedimentary a) Drilling of borewell in upto 60m

799.1.2) Reaming from 150mm dia pilot bore to 300mm dia bore as directed by the departmental officer’s up to 60m depth ending from ground level.

799.3) Charges for developing the borewell forthe entire depth with air compressor of 300cfm capacity [Minimum 8 hours]

799.3.1) Supplying and fixing of 160mm dia PVC end cap for borewell

P SELLAPPAGOUNDER

Bidder Name

P SELLAPPAGOUNDER

KAVITHA BUILDERS