SPECIAL REPAIR TO STAFF QUARTERS OF KENDRIYA VIDHYALAYA NO. - I, AT ESTATE AREA AT ORDNANCE FACTORY, ITARSI

Amount

Demolition of cement concrete (unreinforced) in ground floor and pavings not exc 15 cm of thickness (Below of above the Ground level) complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing unserviceable tiles complete all as specified and directed.

M & L for 25mm thick PCC 1:2:4 type BO (using 12.5mm graded stone aggregate) as in floor complete all as specified and directed.

M & L for PCC 1:4:8 type C2 (40mm graded stone agg) 75mm thick as in sub base complete all as specified and directed.

M & L for screed bed or bedding layer of cement mortar 1:6, 15mm thick for laying floor finishes complete all as specified and directed.

M & L for rendering 10mm thick cement mortar 1:4 for laying wall tiles complete all as specified and directed.

M & L for screed bed or bedding layer of cement mortar 1:6, 20mm thick for laying floor finishes complete all as specified and directed.

M & L Non Skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M & L Jointless Non Skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

S & F 20 mm Granite (of any type) work (table rubbed and polished) in steps, cooking platforms and like bedded in cement mortar (1:4 ) 10mm including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

Providing edge moulding to 18-20 mm thick granite stone any description of counters vanities etc. including machine polishing to edge to give high gloss finish etc complete all as specified and directed.

M & L for Cement concrete tiles with White cement and pigment 25 cm x 25 cm x 22 mm thick,machine pressed; set, jointed and pointed in neat cement slurry in floors complete all as specified and directed.

M & LGlazed ceramic coloured tiles in verticle surface (350x250mmx7mm) /450x350x 7mm thick, in skirting or in Dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M & L for PCC 1:3:6 type C1 (20mm graded stone agg) 100mm thick as in paving concrete complete all as specified and directed.

M & L for PCC 1:3:6 type C1 (20mm graded stone agg) 75mm thick as in plinth protection in attternative bays complete all as specified and directed.

Taking down cement plaster over walls and ceiling surfaces including racking out joints, hacking for key, scrubbing down with water and clear the premises clear of the debris complete all as specified and directed.

M & L for rendering in CM 1:3, 5 mm thick on ceiling or soffits of RCC slabs finished even and smooth without using extra cement complete all as specified and directed.

M & L for rendering 10mm thick in CM 1:6 on fair faces of brick work or concrete work, finished even and smooth with out using extra cement complete all as specified and directed.

M & L for 10 mm thick cement mortor ( 1:4) over surfaces including water proofing compound finished fair and even (Note :- WPC shall be measured & paid separately) complete all as specified and directed.

M & L for preparation of new plaster surface of ceiling and applying two coat of distemper oil emulsion complete all as specified and directed.

Demolition of reinforced cement concrete in floors, beams, chajjas, landing slab in any position or height and similar suspended works complete all as specified and directed.

Form work to soffits of suspended slab such as roof slab, floor slab, landing and similar work n.exc 200mm thick complete all as specified and directed.

M & L6 to 8mm dia and TMT bars, cut to length, bent ot shape required, including cranking, bending , hooking ends and binding with and including mild steel wire(annealed not less than 0.9mm dia) icluding welding, rivetting etc complete all as specified and directed.

M & L for PCC in 1:2:4, type B-0 ( 12.5mm graded stone aggregate) RCC slabs supported on walls, chajjas etc. complete all as specified and directed.

M & L Cement concrete type B1 1:2:4 (20mm graded stone aggregate) as in coping complete all as specified and directed.

M & L for complete removal of existing treatment and applying one coat of distemper oil emulsion on ceiling complete all as specified and directed.

Complete removal of existing treatment by washing rubbing down thoroughly and apply one coats of putty (white chalkning) to finish even & smooth and apply two coats of oil emulsion distamper including a coat of alkali resistance priming paint complete all as specified and directed.

M & L for preparation of external walls plastered or unplastered and applying two or more coatsof 100% Premium acrylic emulsion paint having VOC less than 50 gm/liter and UV resistance as per IS 1549:2004,Alkali & fungal resistance,dirt resistance exterior paint of required shade with silicon addtives @ 1.43 litre/10Sqmover and including priming coatof exterior primer applied @ 0.90 litre/10 Sqm complete all as specified and directed.

M & L for prepration of old decorated plastered or un plastered surface including cornices etc and applying two coat of white wash on walls complete all as specified and directed.

Supply only water proofing compound of approved make complete complete all as specified and directed.

Dismantling unserviceable HDPE water tank Exc 500 & n exc 1000 liters from roof top complete all as specified and directed.

S & F rotationsal moulded polytheline water storage tank 1000 litres capacity(cylindrical vertical with closed top) double layered and fixed in position complete all as specified and directed.

S & F 25mm dia Ball brass valves, high pressure, with polytheene float and flynut complete, screwed for iron pipe orr brass errule and fixed complete all as specified and directed.

S & F in 25 mm bore gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe complete all as specified and directed.

S & F in repair pillar taps cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered Hot or Cold with long screwed shanks and flynuts, screwed for iron pipes and fixed for 15mm dia complete all as specified and directed.

Taking down steel tubing 15mm bore of any description including cleaning for refixing or removal to store complete all as specified and directed.

Taking down steel tubing 20mm bore of any description including cleaning for refixing or removal to store complete all as specified and directed.

Taking down steel tubing 25mm bore of any description including cleaning for refixing or removal to store complete all as specified and directed.

M & L GI tubing 15mm dia medium grade galvanized, with all fittings fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

M & L GI tubing 20mm dia medium grade galvanized, with all fittings fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

M & L GI tubing 25mm dia medium grade galvanized, with all fittings fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Refixing old GI pipe 15 mm bore & connections in new or old position to walls and ceiling or laid in floor complete all as specified and directed.

Refixing old GI pipe 20mm bore & connections in new or old position to walls and ceiling or laid in floor complete all as specified and directed.

S & F in repair 15mm bore bib tap cast copper alloy with crutch or butterfly handle chromium plated fency type complete all as specified and directed.

S & F in repair 15mm bore stop valve cast copper alloy with crutch or butterfly handle chromium plated fency type complete all as specified and directed.

S & F PVC connection 15mm bore size with PTMT nuts of length 450mm long complete all as specified and directed.

S & F PVC low level 10 litre capacity valveless syphonic action type white flushing cistern with inlet ball valve float and handle including brackets and necessary fittings etc incl dismentaling old unserviceable flush tank complete all as specified and directed.

S & F viteress china squtting pan of pattern size 580x440mm white with integral foot rest and flush pipe complete including provision of concrete bedding 1:2:4 type Bo incl dismentaling old unserviceable pan complete all as specified and directed.

S & F China ware coloured EWC complete set incl seat cover incl dismentaling old unserviceable EWC complete all as specified and directed.

S & F Wash hand basin viteras china white size 550x400mm with 15mm bore pillar tap brass chromium plated and 32mm bore CP brass waste coupling including angle iron brackets incl dismentaling old unserviceable WHB complete all as specified and directed.

S & F repair 75 mm out let PVC floor trap with chromium plated grating including Jointing to waste pipe and fixed in cement concrete B1 (1:2:4 ) using 20 mm graded stone aggregate complete all as specified and directed.

S & F PVC (SWR) bends 110 mm dia complete all as specified and directed.

S & F PVC (SWR) bends 75 mm dia complete all as specified and directed.

S & F PVC (SWR) bends 75 mm dia provided with access door complete all as specified and directed.

S & F grating doom 100 mm dia of PTMT (Minimum weight 25 gms) complete all as specified and directed.

Taking down shutters exc 1.0 Sqm and n.exc 2 Sqm each and making good of disturbed surface match the existing surface complete all as specified and directed.

Refixing shutters in same opening exc 1.0 Sgm and n.exc 2 Sqm each after easying and adjusting to the size shape and size of existing frame complete all as specified and directed.

S & F Factory made shutters 35mm thick 2nd class HW rail and style Plain framed panelled shutter without interlocking rail and with one panel of 9mm B.W.P. commercial plyor 12mm veneered particle board with omercial veneering on both faces . The size of rail and stile,kiln seaoned and chemically pressure treated complete all as specified and directed.

S & F 35mm thick 1st class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted withcut and mitred beds for securing glass, etc.; sizes of members of shutters complete all as specified and directed.

S & F 30mm thick PVC factory made panneled door shutter as per IS- 4020 made from MS tube of top and bottom rods. MS frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on plain side & as gap insert for top and bottom rail. Pannelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the stiles & rails with suitable PVC sheet beeding and jointed together with solvent cement as per specification and drawings complete all as specified and directed.

S & F Mild steel 300mm, ordinary rat tail rod pattern spring, including roller and rooler plate complete all as specified and directed.

S & F 250mm MS sliding door bolt plate type stove enamelled black with bright bolt not less than 12mm dia with and including a minium of 6 bolts and nuts four on bolt plate and two on staple plate and fixed complete all as specified and directed.

S & F MS butt hinges 125 mm long with medium weight complete all as specified and directed.

S & F Aluminium anodised barrel tower bolts 150 mm long complete all as specified and directed.

S & F Aluminium anodised handle with 150 mm long complete all as specified and directed.

S & F 12mm stainless steel wire netting of 0.71mm dia fixed with tinned tacks of stainless steel wire staples etc complete all as specified and directed.

S & F in repairs 12mm stainless steel wire netting of 0.71mm dia fixed with tinned tacks ofstainless steel wire staples etc complete all as specified and directed.

M & L for prepration of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M & L for prepration of old wooden surfaces of any description over 10cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Re-fixing the Mild steel window / ventilator shutters in the same frame with and including errecting , welding in place with projected type hinges,with steel handles and steel pegstay complete all as specified and directed.

Hacking out old broken glass from metal frame including punching or drilling out old glaxing pins and providing and fixing new ones complete all as specified and directed.

S & F 3mm thick sheet glass ordinary quality fixed with oil putty and necssary clips/nut bolts area n exc 0.5Sqm in each pane complete all as specified and directed.

S & F 3mm thick sheet glass ordinary quality(ground or obscured of frosted,on one side ) fixed with oil putty and necssary clips/nut bolts area n exc 0.5Sqm in each pane complete all as specified and directed.

M & L for preparation of new steel surfaces and applying two coats of syntetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M & L for preparation of old steel surfaces and applying one coats of synthetic enamel paint complete all as specified and directed.

S & F 12mm thick prelaminated particle board, interior grade, prelaminated both sides with decorative choice laminations to be fixed in aluminium partion complete all as specified and directed.

S & F 100mm Hasp and staple,safety type,brass with mild steel hinge pin incl bolt to hing plate and fixed with screws complete all as specified and directed.

S & F 2nd class hardwood not exc 3 sq.cm plain fillets,square,rectangular or triangular in section clean sawn,secured with nails complete all as specified and directed.

S & F in repairs curtain rails, mild steel, chromium plated with fixing brackets, stops, rollers etc complete all as specified and directed.

S & F Purlins inclluding distance pieces, cleats etc confirming to Fe-290 Gde 165 complete all as specified and directed.

S & F galvalume sheet alu zinc cotting GI based corrugated steel sheet of standard size 0.5mm thick fixed to purli 550 Mpa as in roof covering/cllading to walls colour having of as per manufacturers instructions complete all as specified and directed.

Demolition brick work , masonry wall built in cement mortar complete all as specified and directed.

Excavation in post holes soft/loose soil (or simal holes) each n exc 0.5 Cum,getting out, returing, filling and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm complete all as specified and directed.

Cement concrete 1:3:6, type C2 using 12.5mm graded stone aggregate in foundation, filling and mass concrete complete all as specified and directed.

S & F Post and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or rivetting, etc and similar works confirming to Fe-290 Gde E-165 complete all as specified and directed.

Supply only Chain link MS galvanisd fencing incl line wires, any mesh size or type of standards, rails, straining bolts etc., weight n. less 4.0 kg/sqm complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and directed.

S & F Framed work such as grills grattings etc with ends of bards shouldered and / or riveted or forged into spikes; framed guard bars; ladders; and similar works confirming to Fe-290 Gde E-165 complete all as specified and directed.

S & F plates (Chequered) square cut or notched forming holes without and attachements confirming to Fe-290 Gde E-165 complete all as specified and directed.

M & L for brickwork with subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in CM (1:4) complete all as specified and directed.

M & L for rendering 10mm thick in CM (1:6) on brick work or concrete surfaces finished even and smooth complete all as specified and directed.

Excavation in trenches n. exc 1.5m width and n. exc 1.5 mtr deep and getting out in in soft/loose soil complete all as specified and directed.

M & L for PCC (1:3:6) type C2 using 40mm graded stone aggregate as in concrete bed to drain pipes including packing under and hunching against the sides of pipes after the are laid and tested in bore of pipe 110mm (internal) complete all as specified and directed.

S & F PVC (SWR) pipes 110mm dia single socketed in any lengh with rubber ring laid in treanches complete all as specified and directed.

Returning, filling including spreading levelling, watering and well ramming in layers n. exc 25mm in any type of soil complete all as specified and directed.

Removing excavated material n. exc 50m and depositing where directed at a level exc 1.5m above the starting point complete all as specified and directed.

S&F PVC SWR gully trap 125/110 mm, setting and jointing with solvent cement fixed in repair complete all as specified and directed.

S & F kitchen sinks made of stainless steel 1mm thick with plugs, washers and wastes, incl bedding in cement mortar on to drwarf wall or incl fixing cantilever brackets and connecting union to pipe, over all size 495x420mm bowl size 410x330x160mm complete with suitable PVC waste pipe incl taking down old underviceable sink complete all as specified and directed.

S & F kitchen sinks made of stainless steel 1mm thick with plugs, washers and wastes, incl bedding in cement mortar on to drwarf wall or incl fixing cantilever brackets and connecting union to pipe, over all size 915x460mm bowl size 410x330x160mm complete with suitable PVC waste pipe incl taking down old underviceable sink complete all as specified and directed.

M & L for cement concrete type B1, 1:2:4 (20mm graded agg ) as in padding concrete/coving to jn of sunken floor and vertical walls or chamfored on edges (using WPC 3% by weight of cement WPC will be measured and paid seprately) complete all as specified and directed.

M & L for lime concrete with 40mm graded brick agg in lime mortar 1:2 as in sunken floors complete all as specified and directed.

Demolition of reinforced cement concrete in suspended slabs, beams, lintels complete all as specified and directed.

Mild steel TMT bars 10mm dia and over cut to length bent to shape required ,including cranking, bending spirally for hooping and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M & L for RCC (1:2:4) type B1, using 20mm graded stone aggregates as in precast RCC manhole cover and set in CM (1:6) complete all as specified and directed.

Taking down carefully copper/aluminium point wiring (light, fan, call bell, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc and making good disturbed surface by using cement mortar, white cement, putty etc and match with existing surfaces of walls, floors etc complete all as specified as directed.

Material and Labour for concealed Point wiring with 1100-Volt grade FRLS PVC insulated-unsheathed 1.5 Sq mm stranded copper conductor cable (ISI marked), with continuous earth wire of 1.5 Sq mm stranded copper conductor cable (ISI marked) PVC insulated-unsheathed, drawn in & including non-metallic rigid PVC conduit medium grade with fittings (ISI marked) not less than 25 mm dia, incl modular cover plate with frame, metal flush box suitable to fixing modular cover plate with frame incl cutting chases one light/Ceiling fan/Exhaust fan point controlled by one switch complete all as specified as directed. NOTE :- (i) Cost for cutting chases and concealing the conduit pipe in existing wall is deemed to be included in the item rate quoted. (ii) modular cover plate with frame and metal flush box deemed to be included in the quoted rate.

All as per Item No 108 above but one switch socket outlet point 05 Amps on independent board complete all as specified as directed.

All as per Item No 108 above but one socket out let point 5 Amps on same board complete all as specified as directed.

All as per Item No 108 above but one bell/ buzzer point controlled by one switch complete all as specified as directed.

All as per Item No 108 above but one light point controlled by two 2-way switches complete all as specified as directed.

All as per Item No 108 above but with 4 Sq mm copper cable for 5/15 Amps switch socket outlet including 2.5 sqmm single core earth continuity conductor complete all as specified as directed.

Supply and fixing sheet metal enclosures with socket plug top with MCBs, SPN, 20 Amps with a two pin and earth plug socket complete all as specified and as directed. Make : C & S/Havells/Legrand

Material and labour for sub main wiring with 2 run single core PVC insulated-unsheathed 6 Sq mm stranded FRLS copper conductor cable (ISI marked) & 1 run single core PVC insulated-unsheathed 6 Sq mm stranded copper conductor cable (ISI marked) for earth continuity, drawn in & including not less than 25 mm dia surface rigid non metallic PVC conduit medium grade with fittings on wall surface complete including taking down existing sub main wiring of any type and size all as specified and as directed. (one length of 2 Nos 6 Sq mm conductor cable, 1 No. 6 Sq mm conductor earth continuity cable & PVC conduit shall be measured as one unit length).

Supply and fixing Bell ding dong AC. 230 V SP complete all as specified and directed.

S & F Modular Bell push 6A 1 module complete all as specified and directed.

S & F Modular switch 1 way 6A, 240 volts 1module complete all as specified and directed.

Supply and fixing Modular Socket, outlet 6 Amps complete all as specified and directed.

Supply and fixing Modular Socket, 16 Amps - 2/3 pin complete all as specified and directed.

S & F Modular switch 1 way 16A, 240 volts 1module complete all as specified and directed.

Supply and fixing ceiling rose three terminal surface type complete all as specified and directed.

S & F Fan step regulator modular, 120W, 240 volts 2 module complete all as specified and directed.

Supply and fixing Lamp holder, PVC/polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

Supply and fix LED bulb 9 watt complete all as specified and directed.

Supplying & Fixing mirror light fitting 10 Watt LED luminaire with serrated diffuser (Pre-wired with energy efficient electronic driver) complete all as specified and directed. Make - CG/Havells/Philips / Bajaj.

Supplying & Fixing Decorative Polycarbonate Wall light fitting incl LED bulb 15 watt, retrofit B-22 base), Model : CITY 1 of Havell's make or equivalent incl CFL lamp complete all as specified and directed.

Supply and fixing LED light fitting 18 watts, 4' (feet) 230 volts Lumiline surface and wall mounted LED batten with polycarbonate housing & integrated electronic driver, complete with LED tube light and all accessories, internally pre-wired including making connection with & including 3 core flexible 16/0.2 mm copper conductor cable of adequate length from connector/ ceiling rose to fitting complete all as specified and directed. Havells Cat Part No : LUMILINEBS18WLED840SPCWH/ Philips/Wipro.

Repair and Replacement of building security light fitting 25 W LED New generation Energy Saving & Environment friendly long life versatile pressure die-cast aluminium housing with high power LED as lighting source and lens embedded PC cover having Top Opening separate driver compartment with IP66 protection and impact resistance of IK07 fixing on LT pole/wall with clamps, nuts bolts, washers etc. and connecting light fitting to over head LT line with suitable twin core aluminium conductor including Fabrication and installation of GI pipe bracket made up of medium grade tubing of size 25 mm dia, duly bended by hot forging after filling of sand as per site requirement, length of GI bracket 1.20 mtr including providing two pair of MS flat strip clamps 40 mm x 5 mm with GI bolts nuts and washer including taking out old unserviceable fitting complete all as specified and directed. Make: Havells Code : ENDURAPEARLNEOSL40LED757PASYTOPC/Bajaj.

S & F White cover blanking plate1 module complete all as specified and directed. Make- Anchor/Leader/ Havells.

Taking down Main switch/TPN DB/SPN DB of any type complete all as specified and directed.

S & F MS sheet enclosure busbar box of (size 50 cm x 40 cm x 25 cm) rating 200 amps aluminium busbar incl cutting brick wall to suitable size to fix busbar box complete all as specified and directed.

Supply and Fix for sheet metal enclosures for SPN DB's 240 volts, factory made double door flush type, IP-42 protection and all as per IS-8623, made from sheet metal 8 way 200 amps rated bus bar to be fixed with wall all accessories complete all as specified and as directed. Make:- Legrand/ Schneider / Siemens.

S & F MCB single pole 240 volts 6 to 32 Amps complete all as specified and directed. Make-Legrand/C&S/Havells.

S & F MCB double pole 240 volts 16 to 40 Amps complete all as specified and directed. Make-Legrand/C&S/Havells.

Earthing complete with glavanised steel earth plate elactrode 600 x 600 x 6.0 mm thick buried directly in ground (Earth pit not less than 2.25 mtr deep below ground leves) with top edge of the plate not less 1.5 mtr deep below normal ground level connected to galvanised earth lead wire 4.0 mm dia by means of nut, bolt, check nut and washer of galvanised iron or of steel, earth lead protected by 15 mm dia GI pipe light grade watering pipe 20 mm dia GI light grade GI wire meshed funnel alternate layer of charcoal and salt PCC chamber, reassed for and including RCC cover including all necessary excavation and earth work, earth wire connected to main switch board, testing the earthing after completion all as specified and shown in electric plate No. 5 of MES SSR Pt-I 1991 print and as directed.

Supply and fiixing of ceiling fan 1200mm sweep high speed , single phase , 50 Hz energy efficient, Star rating, 230 Volts complete all as specified and directed. Make- Khaitan/Usha/ Bajaj.

Supply and fixing of Exhaust fan, metal body, 230 Volts, single phase, 300mm sweep suitable for wall mounting and including making of hole in wall, making good the disturbed surface, 5 Star Rating heavy duty complete all as specified and directed. Make-Khaitan/Usha/Polar/Havells.

Materials & labour in replacement of 1100 volts grade heavy duty XLPE cable of size 25 Sqmm 3.5 core, passing through GI pipe with aluminium conductor stranded polyethylene insulated, conductor served with and including sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathedand end termination kit of suitable size out door, cold shrinkable type complete including taking out unserviceable UG cable with jointing kit all complete all as specified and directed.

Materials & labour in replacement of 1100 volts grade heavy duty XLPE cable of size 35 Sqmm 3.5 core, passing through GI pipe with aluminium conductor stranded polyethylene insulated, conductor served with and including sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathedand end termination kit of suitable size out door, cold shrinkable type complete including taking out unserviceable UG cable with jointing kit complete all as specified and directed.

Excavation in trenches in any type of soil (loose/ hard) not exceeding 1.5 Mtr wide and not exceeding 1.5 Mtr in depth and getting out for foundation of pole, laying under ground cables etc and getting out complete all as specified and directed.

M & L sand filling in trenches for cable cushioning with clean, dry and unwashed sand free from sharp particles including gently punning around cable complete all as specified and directed.

M & L Bricks laid in trenches flat with width equal to length of brick for cable protection well burnt sub class 'B' laid across the cable complete all as specified.

M & L of GI pipe light grade 40mm dia bore with all fittings and fixed complete to wall, to pole or laid in trenches and road crossing complete including taking down old corroded GI pipe of any size, type and place complete all as specified and directed.

Cutting the existing bituminiuos road/hard standing for passing of UG Cable crossing and making good the disturbed surface as per its original specification complete all as specified and directed.

Material and Labouring for Cable jointing kit epoxy type for 1100V LT cable for outdoor termination joint complete with jointing material and accessories suitable for 3.5 core XLPE armoured aluminium conductor cable of size 25/35 sqmm complete all as specified and directed.

M & L for replacement of security/street light fitting 60 W LED New generation Energy Saving & Environment friendly long life versatile pressure die-cast aluminium IP-66 roadway luminars with high power LEDs as light source and electronic driver including 2.5 sq mm single core, multistranded PVC insulatd aluminium wire to connect street lifht, fixing on LT pole/ wall with clamps, nuts bolts, washersall incl taking down old unsv of any type of fittings complete all as directed. Make : Havells Ct pt No -ENDURAPEARLNEOSL60LED757PASYTOPC HSN code 9405 or equivalent Bajaj.

pyarelal galar

Vee kay construction

TANUJ CONST. CO.

M/S RAKESH TRADERS