SPECIAL REPAIR TO HARD STANDING AND GATES IN BUILDING NO. 112 INSIDE GCF, JABALPUR UNDER GE (I) (P) FY JABALPUR

Amount

Demolition of Cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) including removal of debris/ boulders to a distance not execceding 250m as directed by Engineer-in-Charge.

M&L 125mm thick PCC type C-2, (1:3:6) using 40mm graded stone aggregate as in sub base flooring all as specified & directed.

M&L for cement concrete in pavement/hardstanding 150mm thick of flexural strength 40kg/sq cm in field using 400kg of cement per cum including necessary formwork all as specified & directed.

Forming 12mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound Grade'A' of thickness of concrete 150mm complete all as specified and directed.

Forming Contraction (Dummy) joints 65 mm deep x 10mm wide, filled with sealing compound Grade 'A' all as directed.

Demolition of bricks built in cement mortar including all quioins, arches etc complete including removal of debris to a distance not exceeding 250m as directed by Engineer-in-Charge.

Demolition of reinforced Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) including removal of debris to a distance not exceeding 250m as directed by Engineer-in-Charge.

M&L cement concrete type B-2 (1:2:4) using 40mm agg as in bed concrete including necessary form work if any for fixing of Chanel etc complete all as specified and directed.

M&L mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete of Fe - 290 (Gde E - 165) all as specified and directed.

Framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde E-165 all as specified and directed.

M&L mild steel, plain, 1.6mm thick black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required.

M&L Preparation of new steel surfaces exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Preparation of old decorated surfaces of wall and applying one coat of plastic emulsion paint to match with existing surfaces complete all as specified and directed.

ASHOKA ASSOCIATES

SUBHASH CHNADRA RAI

DOBARIA BUILDCON

mandeka constructions

SR ASSOCIATES

Tiki Water proofing Co