Loading
Loading…
Loading…
Tender ID
Tender Value
₹95.9 L
EMD Value
₹1.9 L
Closing Date
27 Feb 2026, 11:00 amClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
SIGNAL
15 conditions · 2 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIIB of Northern Railway Standard Tender Document- 2022, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
(a) The Tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii) One similar work costing not less than the amount equal to 60% of advertised value of the tender. (b) (i) In case of tender for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges- substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or (iii) One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note: Work experience certificate from private individual shall not be considered. However, in addition to work experience certificate issued by any Govt. Organization, work experience certificate issue by Public listed company having average annual turnover of Rs. 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated /registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate.
Substantially Completed Work means an ongoing work in which payment equal to or more than 90% of the present contract value (excluding the payment made for adjustment of Price variation (PVC), if any) has been made to the contractor in that ongoing contract and no proceedings of termination of contract on Contractor's default has been initiated. The credential certificate in this regard should have been issued not prior to 60 days of date of invitation of present tender.
Defination of Similar Work :- Any signaling work involving trenching, cable laying, termination and outdoor wiring. Note 1: Tenderer may be required to submit the schedule of those works, Completion/ Performance Certificates of which have been submitted by him/her in support of 30 / 40 / 60 % (as the case may be) criterion of similar nature of work.
31 conditions · 14 needing a document upload
1. Tender fee (if asked) need to be deposited online on www.ireps.gov.in. 2. EMD need to be deposited online on www.ireps.gov.in. 3. For the tenders costing above 50 Lacs: Details of "total contractual payments" in the previous three financial years. 4. For the tender costing above 50 Lacs: Details of technical credentials have successfully completed or substantially completed similar nature work as mentioned in tender condition. Completion certificate issued by competent authority should mandatorily mention Name of work, name of agency, Contract agreement number, date of completion/date of completion of substantially completed work, Completed Cost/substantially completed cost of work, Nature of firm (Partnership/Proprietorship etc.) and details of its constituents, if any, PAN/GSTIN etc. so that evaluation may be done accordingly. 5. If Tenderer is sole proprietor: Notarized copy of Affidavit on Stamp paper of appropriate value declaring that his/her concern is a Proprietary concern. 6. If Tenderer is Partnership firm: Self attested copy of (i) Registered/Notarized partnership deed (ii) Original/Notarized power of attorney. 7. If Tenderer is JV/Limited Company: Copy of Memorandum and Articles of Association of the company. Power of Attorney (duly registered/notarized as per prevailing law) by the company authorizing the person to do/act on behalf of the company. 8. If Tenderer is Company: Copies of MOA (Memorandum of Association) & AOA (Articles of Association) of the company. Power of attorney duly registered/notarized by the company in favour of the individual signing the tender on behalf of the company. Resolution of Board of directors in regards of approving Power of attorney issued. 9. If Tenderer is Society: Attested copy of the certificate of registration. Deed of formation. Power of attorney in favor of the tender signatory.10. Copy of PAN number and TIN number.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Please submit the copy of the registration certificate of firm, PAN, GSTIN etc.
S&T work in c/w (i) Annual GM/NR inspection of SNL-ASR section over Firozpur division.(ii) CTR(P)-9.00 Tkm of existing track lead with 52kg rails of PSC-5 sleepers (1540/km0 with 60kg(90/110 UTS) new rails on PSC wider seat sleepers 1660 nos./km (LWR) with raising ballast cushion 25 cm to 35 cm from km 0.00 to 9.00 on ASR-VKA section under DEN-III/FZR.
433-Sig-T-75-25-26
433-Sig-T-75-25-26
Open
Works - General
4 Months
Firozpur, Punjab
₹0
₹1.9 L
27 Feb 2026
12 Feb 2026
99 items across 3 schedules
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 46,77,442.76 | ||
| — | 18.00 | — | — | ||
| Supply of wooden Table for Block Panel/Office table of size (84" x 42" x 30"), Key Board pull out tray, drawer and top made off MDF Model C-13. Make: Godrej or better. Inspection- Consignee | — | — | — | 2,97,000 | |
| — | 18.00 | — | — | ||
| Supply of Fiber glass reinforced plastic Plates of size 530x960x10 mm as per instruction of Engineer in-charge. (Inspection: Consignee) | — | — | — | 35,431.38 | |
| — | 400.00 | — | — | ||
| Supply of Signal No. Plates as per Drg. No. RST -11393. Inspection: Consignee. | — | — | — | 2,03,392 | |
| — | 18.00 | — | — | ||
| Supply of ESM furniture of Godrej or similar reputed make as per approval of Engineer consisting of the following: i. Executive revolving bearing series slow back floating chair with normal arms cushioned Chair : 1 No. ii. Executive Table of size 72x36x30" with 3 drawers one side, lockers cabinet on other side : 1 No. iii. Visitor chair seat & back cushion with high density Foam with plastic PVC handle capsule type Flat pipe duly Painted black :3 Nos. iv. One Steel Almirah of size 48"x30"x17" with lock and handle arrangement for record keeping at station. Inspection :Consignee. | — | — | — | 8,51,683.32 | |
| — | 50.00 | — | — | ||
| Supply of QTA2 relays AC immunized plug in type DC 9 Ohm neutral track relay miniature tractive armature with 2F/1B contacts front and back contact metal to carbon complete with plug board retaining clip and connectors, confirming to BRS : 939A or latest amendments, BRS:966-(Appendix F2), IRS-S 34 , IRS-S-23 & IRS:S 60 or latest as applicable. (Inspection : RDSO) | — | — | — | 2,73,662.5 | |
| — | 230.00 | — | — | ||
| Supply of Exothermic welding material kits (Cad weld or similar). (Inspection: Consignee) | — | — | — | 4,25,500 | |
| — | 920.00 | — | — | ||
| Supply of insulation for 'L' bracket for IRS type point machine fitting Consisting of Insulation plate- 01 No., Ferrules- 2 Nos. Washers- 4 Nos. (Material- Nylon 66) as per RDSO spec IRS- 23 and S-40 with latest amendment. Inspection by consignee. | — | — | — | 2,69,155.2 | |
| — | 460.00 | — | — | ||
| Supply of insulation for 'P' bracket for IRS type point machine fitting. Consisting of Insulation plate- 01 No., Ferrules- 2 Nos. Washers- 4 Nos. complete as per drg. No. RDSO/S/3361-62 or latest. (Inspection: Consignee) | — | — | — | 3,46,209.8 | |
| — | 690.00 | — | — | ||
| Supply of William stretcher bar insulation set suitable for ground connections as per RDSO drg. no. T-10367, T-10368, T-10384 as applicable and to the spec IRS S 23 & 40/84 with latest amendment. Inspection: Consignee. | — | — | — | 2,69,803.8 | |
| — | 690.00 | — | — | ||
| Supply of Gauge tie plate (GTP) insulation as per RDSO Drg. no. Plate T-10372/Alt. 2,T-10371/Alt.2,T-10368/Alt. & T-15083/88 Alt. 2and to IRS Spec S-23 and S-40 with latest amendment.(Inspection: Consignee) | — | — | — | 34,196.4 | |
| — | 500.00 | — | — | ||
| Supply of Highlighter grade retro reflective tape is made of non-metelised polycarbonate micro prismatic visible from 1000 meters, highly durable ASI 90 specified. Reflection value will not deteriorate as sure clean application and endures protection against seepage and dirt are to conform compliance to ASI 90. Size per four feet width in roll make EGP/ NBL/3M & AVERY or similar or better. (Inspection: Consignee) | — | — | — | 2,43,480 | |
| — | 460.00 | — | — | ||
| Provision of Lead wool compound for filling the gap between signal post and signal base. (Inspection :Consignee) | — | — | — | 1,62,242 | |
| — | 1150.00 | — | — | ||
| Supply of electric fuse complete with fuse block (base) for Railway signalling non deteriorating type NDT low voltage fuse assembly 2Amp/4Amp/16Amp. to suit Specn. No. IRS: S- 78/2006 and fuse block made of PBT/Polycarbonate as per IRS:S-75/2006 (Rev.2 & Amd.2) and drg. no. 23748 (IRS), Alt-4 or latest. Fuse block shall be suitable for round head type fuses. Inspection: RDSO | — | — | — | 2,14,958 | |
| — | 1150.00 | — | — | ||
| Supply of round head type non-deteriorating type low voltage cartridge fuse as per RDSO Specn. No. IRS:S 78/2006 or latest and Capacity 2/4/6/10A/16A/20A Amp. as per requirement at site. (Inspection: RDSO) | — | — | — | 59,478 | |
| — | 1150.00 | — | — | ||
| Supply of panel indication LED Red, Green, Clear etc. (Inspection: consignee) | — | — | — | 49,979 | |
| — | 500.00 | — | — | ||
| Supply of Epoxy paint Berger 1 Kg. (Inspection: Consignee) | — | — | — | 2,51,930 | |
| — | 18.00 | — | — | ||
| Fabrication & fixing of cabin diagram/SWRD/Gate diagram of size 1500 mm X 700 mm made of half inches MS Plywood with as per std. practice of NR. (Inspection: Consignee) | — | — | — | 1,11,390.48 | |
| — | 60.00 | — | — | ||
| Supply of 24 Inch Drawing/Plotting CAD PRINTING for all Architectural and Engineering Purposes, Also suitable for all JUMBO XEROX & CAD printers. WHITE Paper Roll for Plotter Machines, 50 meters, 80gsm. Brand: Generic. (Inspection: Consignee) | — | — | — | 32,262 | |
| — | 6.00 | — | — | ||
| Supply of Plotter Toner Cartridge Cyan, F9J67A HP 728, 130-ml Cyan Ink Cartridge, suitable for Plotter Model No. HP DesignJet T830 MFP. Accepted Make/Brand-HP. (Inspection: Consignee) | — | — | — | 42,989.76 | |
| — | 6.00 | — | — | ||
| Supply of Plotter Toner Cartridge Magenta, F9J66A HP 728, 130-ml Magenta Ink Cartridge, suitable for Plotter Model No. HP DesignJet T830 MFP. Accepted Make/Brand-HP. Inspection :Consignee | — | — | — | 42,989.76 | |
| — | 6.00 | — | — | ||
| Plotter Toner Cartridge Yellow, F9J65A HP 728, 130-ml Yellow Ink Cartridge, suitable for Plotter Model No. HP DesignJet T830 MFP. Accepted Make/Brand-HP. (Inspection: Consignee) | — | — | — | 42,989.76 | |
| — | 5.00 | — | — | ||
| Plotter Toner Cartridge Black, 3WX30A HP 728, 300-ml Matte Black Ink Cartridge, suitable for Plotter Model No. HP DesignJet T830 MFP. Accepted Make/Brand-HP. (Inspection: Consignee) | — | — | — | 75,543.6 | |
| — | 6.00 | — | — | ||
| Supply of HP 955XL BLACK ORIGINAL INK CARTRIDGE BRAND HP or similar Make- HP. (Inspection- Consignee) | — | — | — | 24,300 | |
| — | 6.00 | — | — | ||
| Supply of HP 955XL CYAN ORIGINAL INK CARTRIDGE.BRAND HP or similar Make- HP. (Inspection- Consignee) | — | — | — | 20,088 | |
| — | 6.00 | — | — | ||
| Supply of HP 955XL YELLOW ORIGINAL INK CARTRIDGE.OEM BRAND HP or similar Make- HP. (Inspection- Consignee). | — | — | — | 20,088 | |
| — | 6.00 | — | — | ||
| Supply of HP 955XL MAGENTA ORIGINAL INK CARTRIDGE. OEM BRAND HP or similar Make- HP. Inspection- Consignee. | — | — | — | 20,088 | |
| — | 50.00 | — | — | ||
| Supply of Emergency socket box made of FRP material as per Spec. No. RDSO/SPN/TC/44/2002 ver. 3 or latest. Inspection- Consignee | — | — | — | 1,58,080.5 | |
| — | 50.00 | — | — | ||
| Supply of 6 pin Emergency socket as per RDSO spn no. IRS:TC:42/20 Ver. 1.0 with latest amendment. Make: Epsilon or better make. (Inspection- Consignee) | — | — | — | 15,831.5 | |
| — | 30.00 | — | — | ||
| Supply of Rotary Switch for LC Gate domino panel. (Inspection- Consignee) | — | — | — | 25,200 | |
| — | 46.00 | — | — | ||
| Supply of Smoke Detector Tester Spray of reputed brand | Hand Held Spray for Testing Functioning of Smoke Detectors in S&T equipment rooms. (Inspection: Consignee) | — | — | — | 34,500 | |
| — | 23.00 | — | — | ||
| Supply of good quality Combination notice Board 2X3 Feet (Non-Magnetic White Board with Blue Pin-up Notice Board) with Push Pins for Office, Heavy-Duty Aluminum Frame (White, Blue/green). (Inspection: Consignee) | — | — | — | 23,000 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
FinalGCC-2022-uptoACS6.pdf
IRGCC2022ACS7.pdf
IRGCC2022ACS8.pdf
IRGCC2022ACS9.pdf
IRGCC2022ACS10.pdf
StandardTenderDocument2022.pdf
correctionslip1toSTD2022.pdf
specialconditionsofwork_1.pdf
JPOforProtectionofcablesduringexecuitionofvariousworks_1.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .