Elevators at Center of Excellence Building Chikhali

SITC of Passenger Lift at Center of Excellence Building Chikhali Campus, COEP Tech. with Below Specifications

• Rated capacity :- 16 Passenger/ 1088 Kg • Floors :- B+G+1 floor (3Stops/3 Landings) • Travel :- 09 to 13mtrs • Location of Lift Machine:- MRL • Rated speed :- 1.0 mps VS • Doors type :- TOPO Doors with frame having clear opening of 1000 mm wide x 2000 mm high made from SS 304 grade sheet in hairline finish for car and all landing doors with SS door frames with Big Vision Glass • Lift car enclosure made from SS 304 grade sheet with hairline finish with frame made from MS girders, bracing of adequate size with minimum safety factor of 5, with Toe Guard Apron, with necessary false ceiling with adequate LED lights, blower/fan for ventilation & SS chequered plate flooring, handrails, Rear Side Middle Panel in SS 304 Hairline Mirror Finish, emergency light etc. • COP with SS face plate having metallic push buttons with Braille Code & luminous indicator around button with FPI, scrolling UP/DN LED indicator & with/without attendant key switch, OWD with audio-visual alarm, VAS in Marathi, Hindi & English with intercom system with telephone instrument in Lift car, LMR & FCC/ground floor • Clear Car size of 1500.mm wide x 1750.mm deep x 2000.mm high ( or required Cabin size suitable for 16 passenger as per Standard) • LOP with SS face plate having recess/surface push button box for all landings with scrolling UP/DN LED indicator having metallic push buttons with Braille Code & luminous indicator around button with CPI, Lift car arrival & next travel direction audio-visual indication at all landings • Lift controller based on microprocessor having closed loop control system, with IBMS compatible having necessary port, control panel duly wired with proper size & strength copper wire for power & control circuit, with provision for addition of floor/control card & allied accessories control panel having enclosure of CRCA sheet with powder coating with IP54 Protection class • ARD complete with necessary SMF VRLA batteries Lift shaft available having clear size of 2560.mm wide x 2400.mm deep. 1500.mm Pit depth, 5000 mm Overhead. 1) General: - Job includes entire procedure of obtaining all necessary erection permissions & "License to Work the Lift" from Electrical Inspector(Lifts) with submission to the Engineer In Charge. 2) Warrantee: - Job covers Three year onsite warrantee for all the Lift parts with FCAMC as per the maintenance schedule. 3) Shaft Electrical Work in Contractror Scope. ( COEP will Provide Supply upto the Lift Shaft) 4) Required Scaffolding and Template in contractor Scope. 5) For Storage of Lift Material COEP will provide the storage Space and Contractor will Arrange the Lock and Key