Construction of antansthi stal nagar panchyat maa kamakhya

Cleening of jungal at site

Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in- Charge:D.S.R 2.1

1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources: 8 graded stone aggregate 40 mm nominal size derived from natural sources) D.S.R 4.1.8

Brick work with common burnt clay F.P.S. (non modular) bricks designation 7.5 in superstructure above plinth level up to floor all shapes and sizes in : 1:6 (1 :Cement :6 coar sand )

Brick work with common burnt clay F.P.S. (non modular) bricks designation 7.5 in superstructure above plinth level up to floor all shapes and sizes in : 1:4 (1 :Cement :4 coar sand )

R,C.C. work with cement approved coarse sand and 20 mm gauge approved stone grit in proportion of 1:1.5:3 mix (1 cement : 1.5coarse sand :3 graded stone aggregate 20 mm nominal size )of strength not less than M-20 in door & window lintel excluding supply of reinforcement & its cutting and binding but including its fixing & binding necessary centering & shuttering etc. & also inc. supply of all materials , labour T.& P. etc required for proper completion of the work .with curing compete.For plinth bend. SI No.287

Mild steel (ribbed tor steel) or I/W in plain work such as reinforced concrete or reinforcement B/w when not I/C over all rates, wrought to required shape as necessary i/c bending for proper completion of the work and i/c of all (Material not Issued to store.SI No. 504

Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.

E/w in cutting or filling embankment with ordinary soil in 20 cm. layers compacting to meet requirment including ramming and dressing of surface to requried levels and slopes and also including 1.5 mt. lift and cartage distance 3.00Km.including .

12mm thick plaster with cement mortar in proportion of 1:6 consisting one part cement and Six part of Coarse sand mortar.

Finishing walls with Acrylic smooth exterior paint of required new work (Two or more coat applied @ 1.67ltr/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm). Including supply of all materials and labour etc. Proper completion of work.

Painting or varnishing on three coat iron work in small or new wood work with one coat of ready mixed priming paint and one coat of approved superior quality ready mixed paint of clear synthetic varnish including for proper completion of Wlrk. Paint to be used should confirm

S/F of 6mm thick tiles in flooring or dedo laid with 1:3 cement and coarse sand mortar finished and jointing with white cement slurry and pigment & polising complete including supply of all materials and labour etc. Proper completion of work.Si.

Providing and laying Corrugated G.S Sheet roofing including vetiical /Curved Surface fixed with polymar coated J or L hooks ,Bolt and nuts 8 mm diameter with bitumen and G.I. limpet washer or with fild with white lead including on over lapping of sheets complete (up to any purlines, rafter and trusses and including cutting to size and Shape Wherever requaird

Provision for hand pump and cenetry charge with fitting with labour and material etc.

Supply and Fixing of Sign Board I/C all work.

Please Enable Macros to View BoQ information