COMPREHENSIVE REPAIR AND MAINT OF ALL TYPES OF WOODEN FURNITURE OF BSO EAST AND NAI, CQA(W), CQA(OFV), SQAE(A), LPR, SQAE(L), AQAW(A) OF DGQA UNITS UNDER GE (EAST) JABALPUR (WOODEN FURNITURE)

Amount

Bed Plywood Top (Drawing No FD-247)

Removing old damaged/unserviceable head rest of bed plywood top and supply & fixing new head rest (of suitable size),4.0 mm thick one side teak faced and other side commercial plywood including prepration of surface & applying high gloss french polish on newly fixed head rest to match the colour with existing surface complete all as specified and directed.

ditto all as per item No 1.01 above but unserviceable foot rest complete all as specified and directed.

Removing old damaged/unservice-able long rails of bed plywood top. Supply and fixing new long rails made of Ist class hard wood (MP teak) minimum size 1920x100x35 mm and applying high gloss French polish on newly fixed long rails to match the colour with existing surface complete all as specified and directed.

Removing old damaged plywood top and supply and fixing new ply wood of suitable size, 12 mm thick BWR type, ISI mark (minimum size 6’ x 3’) as per drawing all as specified and directed.

Removing old damaged stiffner 40mmx60mm and supply and fixing new stiffner of teak wood Ist class suitable size as per drawing all as specified and directed.

Removing old damaged Leg toward head side and supply and fixing of new leg of length 660mm. At top section 60mm x 30mm from 400mm to 660mm and at bottom section 60 x60 at top and 30 x30mm at bottomof 400mm length of the leg of teak wood Ist class suitable size duly fixed and fixing of one side teak face ply wood 4 mm on back side after reparing all as specified and directed.

Removing old damaged leg at the foot and supply and fixing new leg of length 500 mm of section 60mm x30mm from 500mm to 400mm and section 60x60 at 400mm and 30x30at bottom of the leg of teak wood Ist class suitable size as per drawing all as specified and directed.

M&L for Painting of the MNF set with two coats of synthetic enamel paint of superior quality of black colour after preparation of the surface of MNF set as specified and directed.

Supply and fixing new corners of suitable size at the point of joining rail with legs duly polished of teak wood Ist class so that all joints be stiff/tighten and play be stopped as specified and directed.

Chair Dining (Drawing Nos FD-16, 279, 228, 203 & Fd/Map-II/05)

Taking out old broken unserviceable front leg of chair dining and supply & fixing new front leg of suitable size, made of Ist class hard wood (MP teak) including preparation of surfaces and applying high gloss French polish on newly fixed leg to match the colour with existing chair complete all as specified and directed.

ditto all as per item No 2.01 above but rear legs complete.

ditto all as per item No 2.01 above but side rails complete.

ditto all as per item No 2.01 above but rear rails complete.

ditto all as per item No 2.01 above but front rails complete

ditto all as per item No 2.01 above but side stiffeners complete

ditto all as per item No 2.01 above but center stiffeners complete.

ditto all as per item No 2.01 above but Back Rest stiffeners.

ditto all as per item No 2.01 above but removing old damaged PVC seat and supply and fixing of new PVC Seat complete

Replacement of old unserviceable PVC buffers and supply and fixing PVC buffers/rings as per existing size of suitable for chair dinning size as directed.

Chair writing (Drawing No FD-250, 280)

Taking out old broken unserviceable front leg of chair writing and supply and fixing new front leg of suitable size, made of Ist class hard wood (MP teak) including prepration of surfaces and applying high gloss french polish on newly fixed leg to match the colour with existing chair complete all as directed.

ditto all as per item No 3.01 above but rear legs complete

ditto all as per item No 3.01 above but side rails complete

ditti all as per item No 3.01 above but rear rails complete.

ditto all as per item No 3.01 above but Front rails complete

ditto all as per item No 3.01 above but side or center stiffeners complete

ditto all as per item No 3.01 above but adjustment and tightening of chair to make all joints stiff as specified and directed.

ditto all as per item No 3.01 above but Back Rest complete

ditto all as per item No 3.01 above but arm rest complete.

Replacement of old unserviceable PVC buffers and supply and fixing PVC buffers/rings as per existing size to chair writing as directed.

Chair Wooden Bottom (Drawing No FD- 56, 225, 285)

Taking out old broken u/s front leg of chair, supply & fixing new front leg of suitable size, made of Ist class hard wood (MP Teak) including preparation of surfaces and applying high gloss french polish on newly fixed leg to match the colour with existing chair complete all as specified and directed.

ditto all as per item No 4.01 above but rear leg complete.

ditto all as per item No 4.01 above but side rails complete.

ditto all as per item No 4.01 above but rear rail complete.

ditto all as per item No 4.01 above but front rail complete.

ditto all as per item No 4.01above but side stiffeners complete

ditto all as per item No 4.01 above but centre stiffeners complete.

ditto all as per item No 4.01 above but supply & fixing with suitable wood screws new seat of 6 mm thick BWR grade plywood complete in replacement of old broken specified and directed.

ditto all as per item No 4.01 above but back rest complete.

Replacement of old unserviceable PVC buffers and supply and fixing PVC buffers/rings as per existing size to chair wooden bottom as directed.

ditto all as per item No 4.01 above but adjustment and tightening all joints as specified and directed.

Chair Easy (Drawing No FD-229)

Taking out old broken unserviceable front leg of chair easy and supply & fixing new front leg of suitable size made of Ist class hard wood (MP Teak) including preparation of surfaces and applying high gloss french polish on newly fixed leg to match the colour with existing chair complete specified and directed.

ditto all as per item No 5.01 above but rear leg complete.

ditto all as per item No 5.01 above but front or rear rail of seat complete.

ditto all as per item No 5.01 above but adjustment and refixing so as to make stiff all joints as specified and directed.

ditto all as per item No 5.01 above but top rail of back complete

ditto all as per item No 5.01 above but bottom rail of back complete.

ditto all as per item No 5.01 above but arm complete.

ditto all as per item No 5.01 above but side rail of seat complete.

Replacement of old unserviceable PVC buffers and supply and fixing PVC buffers/rings as per existing size to chiar easy as directed.

Table Peg (Drawing No FD- 25, 236, 277)

Taking out old broken unserviceable leg of table peg and supply & fixing new suitable leg made of Ist class hard wood (MP Teak) including preparation of surfaces and applying high gloss french polish on newly fixed leg to match the colour with existing polished surface complete all as specified and directed.

Taking out broken/unserviceable table top of table peg and supply & fixing new table top of suitable size, made of 18 mm thick pre-laminated MDF board, exterior grade of suitable size, one side with teak shade and balancing white lamination on other side with and including all round teak wood beading of 4 mm x 18 mm size fixed with adhesive and headless pins duly given a coat of high gloss French polish complete all as specified and directed.

ditto all as per item No 6.01 above but top side rail complete.

ditto all as per item No 6.01 above but bottom rail complete.

Replacement of old unserviceable PVC Buffers/Rings and supply and fixing PVC buffers/rings as per existing size to table peg as directed.

Table Centre (Drawing No FD-29, 274, 235)

Taking out old broken unserviceable leg of table centre and S&F new suitable leg made of 1st class hard wood (MP Teak) of suitable size including preparation of new surfaces and applying high gloss french polish on newly fixed leg to match the colour with existing polished surface complete all as specified and directed.

Taking out broken/un-serviceable top of table centre and supply & fixing new table top of suitable size, made of 18/19mm thick prelaminated MDF board grade-I type-I as per IS 14587 (1998) of make as approved by GE/E-in-Charge, one side with teak wood shade and balancing white lamination on other side including all round teak wood beading of 4 mm x 18 mm size fixed with adhesive and headless pins duly given a coat of high gloss French polish complete all as specified.

ditto all as per item No 7.01 but broken long rail complete.

ditto all as per item No 7.01 above but short rail complete.

ditto all as per item No 7.01 above but broken side stiffener complete.

ditto all as per item No 7.01 above but supply and fixing of center stiffner 20 mm x 50 mm joining the two side stiffner to make joints stiff irrespective of what is shown in the drawing and as directed.

Replacement of old unserviceable PVC buffers and supply and fixing PVC buffers/rings as per existing size to table center as directed.

Teapoy (Drawing No FD- 64, 232, 278, 682)

Taking out old unserviceable leg of teapoy and S&F new suitable leg made of 1st class hard wood (MP Teak) of suitable size including preparation of new surfaces and applying high gloss french polish on newly fixed to match the colour with existing polished surface complete all as specified and directed.

Taking out broken/un-serviceable top of teapoy and supply & fixing new table top of suitable size, made of 18/19mm thick prelaminated MDF board grade-I type-I as per IS 14587 (1998) of make as approved by GE, exterior grade of suitable size, one side with teakwood shade and balancing white lamination on other side with and including all round teak wood beading of 4 mm x 18 mm size fixed with adhesive and panel pins duly given a coat of high gloss French polish complete all as specified and directed.

ditto all as per item No 8.01 but unserviceable top long rail.

ditto all as per item No 8.01 but unserviceable bottom rail.

Replacement of old unserviceable PVC buffers and S & F PVC buffers/rings as per existing size to Teapoy as directed.

Table Dining 6/8 Person (Drawing No FD- 30, 239, 273, 376)

Taking out old unserviceable leg of table dining and supply & fixing new leg made of Ist class hard wood (MP Teak) of suitable size including preparation of surface and applying high gloss French polish on newly fixed leg to match the colour with existing polished surface complete all as specified and directed.

ditto all as per item No 9.01 but unserviceable long rail of suitable size complete.

ditto all as per item No 9.01 but unserviceable short rail of suitable size complete.

Taking out un-serviceable table top of table dining (6/8persons), supply & fixing new table top of suitable size, 18mm thick prelaminated MDF board grade-I type-I as per IS-14587 (1998) of make as approved by GE, one side with teakwood shade and balancing white lamination on other side including all round teak wood beading of 4 mm x 18 mm size fixed with adhesive and panel pins duly given a coat of high gloss French polish complete all and making joints stiff as specified and directed.

ditto all as per item No 9.01 but unserviceable 100mm x 25mm stiffners below the top and supply and fixing the new stiffner of suitable size in dovetail joint between long rails size complete as directed by GE/Engr-in-charge.

Supply and fixing in replacement of teak wooden coners of 50mmx50mmx40mm size joining legs with top rails to make stiff joints complete all as specified and directed.

Replacement of old unserviceable PVC buffers and S & F PVC buffers/rings of size 20mm dia and 15mm height to table dinning 6/8 person as directed.

Table Dining 4 Person (Drawing No FD/Map-II/03 )

Taking out old unserviceable leg of table dining and supply & fixing new leg made of Ist class hard wood (MP Teak) of suitable size including preparation of surface and applying high gloss French polish on newly fixed leg to match the colour with existing polished surface complete all as specified and directed.

ditto all as per item No 10.01 but unserviceable long rail of suitable size complete.

ditto all as per item No 10.01 but unserviceable short rail of suitable size complete.

Taking out un-serviceable table top of table dining (6/8persons), supply & fixing new table top of suitable size, made of 18/19mm thick prelaminated MDF board grade-I type-I as per IS 14587 (1998) of make as approved by GE, exterior grade of suitable size, one side with teakwood shade and balancing white lamination on other side including all round teak wood beading of 4 mm x 18 mm size fixed with adhesive and panel pins duly given a coat of high gloss French polish complete all and making joints stiff as specified and directed.

Replacement of old unserviceable PVC buffers and S & F PVC buffers/rings of size 20mm dia and 15mm height to table dinning 6/8 person as directed.

Table 3' X 2' with Drawer (Drawing No FD- 283, 224)

Replacement of leg of table and supply & fixing new leg made of Ist class hard wood (MP Teak) of suitable size including preparation of surface and applying high gloss French polish on newly fixed leg to match the colour with existing polished surface complete all as specified and directed.

ditto all as per item No 11.01 but unserviceable long rail complete.

ditto all as per item No 11.01 but unserviceable short rail complete.

ditto all as per item No 11.01 but unserviceable bottom rail complete.

ditto all as per item No 11.01 but unserviceable bottom of drawer with 6mm plywood BWR of suitable size complete.

Replacement of un-serviceable table top and supply & fixing new table top of suitable size, made of 18/19mm thick prelaminated MDF board grade-I type-I as per IS 14587 (1998) of make as approved by GE, exterior grade of suitable size, one side with teak wood shade and balancing white lamination on other side with and including all round teak wood beading of 4 mm x 18 mm size fixed with adhesive and panel pins duly given a coat of high gloss French polish complete making all joints stiff as specified and directed.

S & F in replacement of 25mm x 25mm section track rail with grooves of 12mm x12mm in section complete all as specified and directed..

S & F in replacement of front of drawer of suitable size with 18mm thick prelaminated MDF board exterior grade teak wood shade complete with knob duly fixed complete all as specified and directed.

S & F in replacement of drawers made to size as per drawing complete all as specified and directed.

Replacement of old unserviceable PVC buffers and S & F new PVC buffers/rings of size 20mm dia and 10mm height to Table as directed.

Table 3' X 2' without Drawer (Drawing No FD- 284, 223)

Taking out old unserviceable leg of and supply & fixing new leg made of Ist class hard wood (MP Teak) of suitable size including preparation of surface and applying high gloss French polish on newly fixed leg to match the colour with existing polished surface complete all as specified and directed.

ditto all as per item No 12.01 but unserviceable long rail complete.

ditto all as per item No 12.01 but unserviceable short rail complete.

ditto all as per item No 12.01 but unserviceable short stiffner/bottom rail complete.

Replacement un-serviceable table top of table and supply & fixing new table top of suitable size, made of 18 mm thick pre-laminated MDF board, exterior grade, one side with teak wood shade and balancing white lamination on other side with and including all round teak wood beading of 4 mm x 18 mm size fixed with adhesive and panel pins duly given a coat of high gloss French polish complete and making all joints stiff as specified and directed.

Replacement of old unserviceable PVC buffers and S & F new PVC buffers/rings of size 20mm dia and 10 mm height for as directed.

Table Dressing Ladies (Drawing No FD- 32, 251,378 & Map)

Taking down old unserviceable looking mirror of table dressing ladies and S&F new looking mirror 5 mm thick of suitable size complete all as specified and directed. (Make:-Modi Guard/Saint Gobain).

Dittto as per item No 13.01 but the complete box with drawer of table dressing ladies of size and specification as directed.

S&F in Replacement of old and unserviceable teak wood beading & 6mm thick ply at the back of the mirror of dressing table with 6mm thick ply BWR suitable size fixed with teak wood beading screws as specified and directed.

Table Dressing Gents (Drawing No FD-31, 230, 278, DB- 3980 & Map)

Taking down unservicable looking mirror of table dressing gents and S&F new looking mirror 5 mm thick of suitable size complete all as specified and directed. (Float glass Make:-Modi Guard/Saint Gobain or equivalent as approved by GE).

Supply and fixing in replacement of knob as approved by GE.

Dittto as per item No14.01 but the complete box with drawer of table dressing gents of size and specification as directed by Engineer-in- charge.

S&F in Replacement of old and unserviceable beading & 6mm thick ply at the back of the mirror of dressing table with 6mm thick ply BWR suitable size fixed with teak wood beading and screws as specified and directed.

Table Bed Side (Drawing No FD- 28, 276, 210, DB- 3956, 4049 & Map)

Taking out old unserviceable side of table bed side and S&F new side of suitable size made of 18 mm thick pre- laminated MDF board, exterior grade, one side with teak shade fixed with 4mm x18mm teak wood beading to the front side and bottom of side. Further fixing two PVC rings at the bottom of each side all as specified and directed.

Taking out old unserviceable bottom and S&F new bottom of suitable size made of 18 mm thick pre- laminated MDF board, exterior grade,one side with teak shade and bottom shall be covered with 4mm size teak wood beading fixed with panel pins on front sides complete all as specified and directed.

S&F in replacement of top made of 18 mm thick pre- laminated MDF board, exterior grade of suitable size, one side with approved shade of suitable size complete all as specified and directed.

Taking out old unserviceable Center shelf of table bed side and supply and fixing new center shelf of suitable size, made out of 12 mm thick pre- laminated MDF board, exterior grade, one side with teakwood shade fixed with 4mm thick beading on the front duly polished complete all as specified and directed.

Taking out old unserviceble back of table bed side and supply and fixing new back made out of 6 mm thick BWR (Boiled water resistance) grade plywood of suitable size complete all as specified and directed.

Table Writing/Table writing JCO Modified (Drawing No FD- 249, 275 DB 3959)

Taking out old unserviceable leg of table writing and supply & fixing new leg made of Ist class hard wood (MP Teak) of suitable size including preparation of new surfaces and applying high gloss French polish on newly fixed leg to match the colour with existing polished surface complete all as specified and directed.

ditto all as per item No 16.01 but unserviceable side stiffener complete.

ditto all as per item No 16.01 but unserviceable centre stiffener complete.

Taking out un-serviceable table top of table writing and S&F new table top of suitable size, made of 18 mm thick pre-laminated MDF board, exterior grade teakwood shade and including all round teak wood beading of 4 mm x 18 mm fixed with adhesive and panel pins duly given a coat of high gloss French polish and making all joints stiff as directed.

Taking out old unserviceable top long rails of table writing and supply & fixing new long rail of suitable size made of Ist class hard wood (MP Teak) including preparation of new surfaces and applying high gloss French polish on newly fixed leg to match the colour with existing polished surface complete all as as directed.

ditto all as per item No 16.01 but unserviceable lock and S & F of SS locks 50 mm four levers ISI marked as approved by GE.

Replacement of shutter of table writing with new shutter of suitable size complete on all respect , made of 18 mm thick pre-laminated MDF board, exterior grade teakwood shade and including fixing of teak wood beading of 4 mm x 18 mm with adhesive and panel pins on three sides and 10mm x 18mm on the fourth wherein shutter is to be fixed with piano hinge of medium quality to the cabinet duly given a coat of high gloss French polish as specified and directed.

S&F in replacement of side of cabinet with 18mm thick prelaminated MDF board of suitable size as directed.

S&F in replacement of shelf with 18mm thick prelaminated particle board of suitable size as existing directed.

S&F in replacement of bottom of cabinet with 18mm thick prelaminated mdf board of suitable size as existing directed.

Replacement of old unserviceable knobs and supply and fixing by teak wood finished knobs with machine screw and washer of approved quality by GE/E-in-Charge

Replacement of old unserviceable PVC buffers and supply and fixing by screw PVC buffers/rings as per existing size for Table writing as directed.

Sofa Set 5 Seater (Drawing No FD- 373, 281)

Taking out old Unservicable arm of sofa set 5 seater and S&F new arm of suitable size made out of Ist class hard wood (MP Teak) including preparation of new surfaces and applying high gloss French polish to match with the existing colour complete all as directed.

Ditto- all as per item No 17.01 above but broken front leg complete.

Ditto- all as per item No 17.01 above but broken rear leg complete.

Ditto- all as per item No 17.01 above but broken long rail complete.

Ditto- all as per item No 17.01 above but broken side rail complete.

Ditto- all as per item No 17.01 above but unservicable wooden bearers complete.

S & F in replacement of wooden rail 30mm x 50mm between back legs to support back frame complete as directed.

Removing old unserviceable cushion complete as per shape & size ref in drg with coolgels-particle PU foam of size 22''x21''x100/95 mm (Make Sleepwell product Cool Gel-s/Godrej) with upholstery of tapestry cloth of range not less than Rs. 450/- meter of shade colour approved by GE and stiched with chain over provided cushion duly stiched with lining cloth shall be provided

Sofa Single Seater (FD-281)

Taking out old Unservicable arm of sofa single seater and S&F new arm of suitable size made out of Ist class hard wood (MP Teak) including preparation of new surfaces and applying high gloss French polish to match with the existing colour complete all as directed.

-Ditto- all as per item No 18.01 above but broken front leg complete.

-Ditto- all as per item No 18.01 above but broken rear leg complete.

-Ditto- all as per item No 18.01 above but broken front rail of the seat complete.

-Ditto- all as per item No 18.01 above but unservicable wooden bearers complete.

-Ditto- all as per item No 18.01 above but broken side rail of the seat complete.

Removing old unserviceable cushion complete as per shape & size ref in drg with coolgels-particle PU foam of size 22''x21''x100/95 mm (Make Sleepwell product Cool Gel-s/Godrej) with upholstery of tapestry cloth of range not less than Rs. 450/- meter of shade colour approved by GE and stiched with chain over provided cushion duly stiched with lining cloth shall be provided

S&F in replacement of wooden 30mm x 50mm between back legs to support back frame complete as directed.

Side Board (Drawing No FD- 26, 241, 371, 372)

Taking out old broken unserviceable leg of side board and supply & fixing new leg made of 1st class hard wood (MP Teak) of suitable size including preparation of new surfaces and applying high class french polish on newly fixed leg to match the colour with existing polished surfaces complete all as specified and directed.

-Ditto- as per item No 19.01 above but front and rear long stiffener complete

-Ditto- all as per item No 19.01 above but side stiffener complete

Taking out old unserviceable back ply of side board and supply & fixing new back made out of 6 mm thick BWR grade ply wood of suitable size complete all as directed.

Taking out broken/unserviceable top/bottom of side board and supply & fixing new top of side board suitable size, made of 18 mm thick pre-laminated MDF board and including all round teak wood beading of 3 mm x 18 mm size fixed with adhesive and panel pins duly given a coat of high class french polish complete all as directed.

S & F in replacement of shutter complete as directed.

Replacement of old unserviceable knobs and supply and fixing by teak fancy knobs with machine screw and washers of approved by GE.

S&F in replacement of 75mm butt hinges MS cold rolled "medium grade" butt hinges ISI marked.

S&F in replacement of Ball catch spring with magnetic catcher of approved by GE.

S&F in replacement of sides as per existing size/specifications complete all as directed.

Bin Soiled Linen (Drawing No FD-244)

Taking out old unservicable back side of Bin soiled linen and supply & fixing new back made out of 6 mm thick commercial grade plywood suitable size complete all as specified and directed.

Taking out old broken unserviceable leg of bin soiled linen and supply & fixing new suitable leg made of 1st class hard wood (MP Teak) of suitable size including preparation of new surfaces and applying high class french polish on newly fixed leg to match the colour with existing polished surface complete all as directed .

Removing all/broken plywood from the top of bin solid linen with out damaging the frame and in lieu of providing / fixing 6 mm thick one side teak plywood including preparation of new surfaces and applying high class french polish on newly fixed leg to match the colour with existing polished surface complete all as directed.

Table 3' X 3' (900 X 900 MM) (Drawing No FD-291)

Taking out broken unserviceble table top and supply & fixing new table top of suitable size, made of 18 mm thick pre-laminated mdf board, bonded with phenol formaldehyde synthetic resin, exterior grade of suitable size, one side with approved shade and balancing white lamination on other side with and including all round teak wood beading of 3 mm x 18 mm size fixed with adhesive and panel pins duly given a coat of high gloss French polish complete and make all joints stiff as specified and directed.

-Ditto- all as per item No 21.01 above but broken side rail complete

Taking out old broken unserviceable leg of table and supply & fixing new suitable leg made of Ist class hard wood (MP Teak) of suitable size including preparation of new surfaces and applying high gloss French polish on newly fixed leg to match the colour with existing polished surface complete all as directed.

S&F in replacement of corners of sides 3"x3" thickness 25mm underneath the top rails and joining the legs complete to make joints stiff and stable as specified and directed.

CHAIR DINNING LONG BACK FD-357

S&F in Replacement of unserviceable tapestry cloth from seat and back with new tapestry cloth of range not less than Rs. 450/- meter of shade colour approved by GE.

S&F in replacement of cushion 32 density of 50mm thickness (Make Sleepwell product Cool Gel-s/Godrej) of suitable size of seat and back made to size duly upholstered with tapestry cloth all as specified and directed. (Make : sleepwell/kourlon or equivalent as approved by GE)

S&F in replacement of unserviceable front legs teak wood complete all as specified and directed.

S&F in replacement of rear legs teak wood of suitable size complete all as specified and directed.

S&F in replacement of side rails with of teak wood 40mmx20mm made to size as existing all as specified and directed.

S&F in replacement of centre stiffner teak wood 25mm x 40mm all as specified and directed.

S&F in replacement of Back/Front rail of seat with new teak wood rail of 75mmx20mm complete all as specified and directed.

S&F in replacement of Batten with new teak wood batten 70mmx10mm all as specified and directed.

S&F in replacement of side stiffner teak wood 25mm x 40mm all as specified and directed.

CHAIR EASY WITH CUSHIONED

S&F in Replacement of unserviceable tapestry cloth from seat and back with new tapestry cloth of range not less than Rs 450/- meter of shade colour approved by GE.

S&F in replacement of unserviceable foam of seat with coolgels-particle PU foam of 75mm thickness 32 density suitable size (Make Sleepwell product Cool Gel-s/Godrej) duly upholstered as directed by GE.

S&F in replacement of unserviceable foam of back with coolgels-particle PU foam of 75mm thickness 32 density suitable size (Make Sleepwell product Cool Gel-s/Godrej) duly upholstered as directed.

S&F in replacement of arm with new teak wood arm of 65x25mm of suitable complete as directed.

S&F in replacement of unserviceable front legs teak wood as directed.

S&F in replacement of unserviceable rear legs teak wood as directed.

S&F in replacement of plywood seat with 6mm thick commercial plywood as directed.

ALMIRAH SMALL SHELVES (W)

S&F in Replacement of front shutter of almirah medium with shelves with new suitable size complete as existing and all as directed.

S&F in replacement of unserviceable shelves with new of suitable size as existing as directed.

S&F in replacement of unserviceable MS cold rolled (medium grade) butt hinges 50mm long ISI marked as directed.

S&F in replacement of hasp and staple of 75mm size with new aluminum hasp and staple of 75mm as directed.

diito all as per item No.168 but S&F in replacement of unserviceable long front stiffner teak wood at the base of almirah of suitable size complete as directed by GE/Eng-in-Charge

BOOK CASE (FD-237)

Taking out existing old unserviceable top and bottom of book case and providing new top and bottom made out of 18 mm thick commercial block board, bottom shall be of 18 mm thick plywood commercial inluding polishing complete all as spceified and directed.

Supply and fixing in replacement new shutter double leaf made out of 18 mm thick MDF board one side teak finish and other side commercial fixed with continuous hinges chromium plated (Piano) and polishing complete, 6 mm thick teak wood edging shall be provided, 40 mm plastic knob superior quality in each shutter shall be provided.

S&F in replacement shelf from book case and providing new shelf made out of 1st class hard wood (Teak) and bottom of 6 mm thick plywood commercial BWR Gde in each drawer and polishing complete as directed.

SAFE MEAT FD-47,369

S&F in Replacement of unserviceable wire mesh from the safe meat and supply and fixing of wire mesh 20 gauze of quality approved by GE from all sides as existing and as directed.

S&F in replacement of legs teak wood of with new of suitable size are as existing as directed by GE

S&F in replacement of unserviceable aluminum hasp and staple size 75mm long directed

S&F in replacement of aluminum handle 100mm long directed.

S&F in replacement of unserviceable bottom rail of 50mm x 19mm of teak wood complete as directed.

S&F in replacement top rails complete all as directed.

S&F in replacement of 19mm thick teak wood plank of suitable size at the back as directed.

S&F in replacement of teak wood plank 19mm thick of suitable size at the bottom as directed.

M&L for painting a coat of white synthetic paint superior quality(glossy) over a coat of primer to all wooden surface with spray machine as per standard workmanship as directed.

HAT STAND FD-46,363,364

S&F in Replacement of unserviceable mirror of hat stand with new mirror 5mm thickness 300mm x 460mm complete as existing of quality approved by GE and as directed.

S&F in replacement of unserviceable pegs teak wood of hat stand with new peg so as to match the existing pegs of size as existing and quality approved by GE as directed.

S&F in replacement of unserviceable particle board with new mdf board of 18mm thickness of exterior grade with one side teak wood approved by GE as directed.

S&F in replacement of teak wood beading 6mm x 35mm edges round all round complete as specified and directed.

S&F in replacement of unserviceable metal key plates of suitable size as specified and directed.

TABLE 5' X 2' 10" (W) FD-498

S&F in Replacement of unserviceable legs with new Ist class teak wood legs 50mm x 50mm in section of top 40mm x 40mm in section of bottom complete as specified and directed.

S&F in replacement of unserviceable long rail Ist class teak wood 25mm x 100mm as specified and directed.

S&F in replacement of short rail 1st class teak wood complete as specified and directed.

S&F in replacement of unserviceable top with new top made of 18mm thick prelaminated mdf board of teak vaneer exterior grade fixed with 4mm thick teak wood beading on the edges duly french polished complete as specified and directed.

S&F in replacement of side stiffners 1st class teak wood 25mm x 50mm of suitable size existing complete as specified and directed.

S&F in replacement of centre stiffner 1st class teak wood 25mm x 50mm of suitable size as existing complete as specified and directed.

S&F in replacement of unservicable wooden plank on the top with new wooden plank of suitable size as existing complete as specified and directed.

BIN SOILED LINEN multipurpose (FD/E6/MAP/09)

Taking out existing old unserviceable top and bottom of bin soiled linen multipurpose and providing new top and bottom made out of 18 mm thick pre-laminated particle board including 4 mm thick teak wood edging all aroung the top complete all as specified and directed.

Taking out unserviceable plywood from bin soiled linen multipurpose back side and providing new 6 mm plywood including 4 mm teak wood edging duly polishing complete all as specified.

Taking out old unserviceable drawer from bin soiled linen multipurpose and providing new drawers made out of 18 mm particle board including and polishing complete all as specified and directed.

ALMIRAH LARGE WITH SHELVES (DB-4116)

Supply and fixing shelf made out of 20 mm thick second class hard wood plank of size 1050 mm x 500mm, polishing with Hi-gloss French polish including preparation of surfaces and taking out existing unserviceable shelf complete all as specified, shown on drawing and as directed.

Supply and fixing in replacement hasp and staple aluminium anodised of size 100mm (as per sample) complete all as specified, shown on drawing and as directed.

TV trolley (Fd/E6/Map/04(R)

Taking out existing old unserviceable top of TV trolley and providing new top of made out of 18 mm thick Pre- laminated particle board including 4 mm thick teak wood edging all aroung the top complete all as specified and directed.

Removing old unsv back of TV trolley and providing new back of made out of 18 mm thick Pre-laminated particle board complete all as specified and directed.

Removing old unsv side of TV trolley and providing new side of made out of 18 mm thick Pre- laminated particle board complete all as specified.

S&F in replacement of Ball catch spring with magnetic catcher of approved by GE.

Computer table companion C2 Make : Godrej

Taking out existing old unserviceable top of computer table and providing new top of made out of 18 mm thick pre-laminated MDF board, exterior grade of suitable size, one side with teak shade and balancing white lamination on other side complete all as specified and directed.

S&F in replacement new side of made out of 18 mm thick pre-laminated MDF board, exterior grade of suitable size, one side with teak shade and balancing white lamination on other side complete all as specified and directed.

S&F in replacement new key board of made out of 18 mm thick pre-laminated MDF board, exterior grade of suitable size, one side with teak shade and balancing white lamination on other side with channel complete all as specified and directed.

Side rack 3/4 space (DB 4123)

S&F in Replacement of front leg of side rack 3/4 space new suitable size complete as existing as directed.

S&F Replacement of rear leg of side rack new teak wood leg suitable size or complete as existing as directed by GE/Eng-in-Charge

S&F Replacement of wooden shelf of side rack 3/4 space new teak wood shelf suitable size or complete as existing as directed.

Table office clk wooden(Drawing No DB-4120)

Taking out old unserviceable leg of table office clk wooden and supply & fixing new leg made of Ist class hard wood (MP Teak) of suitable size including preparation of surface and applying high gloss French polish on newly fixed leg to match the colour with existing polished surface complete all as specified and directed.

-Ditto- all as per item No 34.01 but unserviceable long rail of suitable size complete.

-Ditto- all as per item No 34.01 but unserviceable short rail of suitable size complete.

Taking out un-serviceable table top of table office offier wooden, supply & fixing new table top made of teak wood suitable size or complete as existing as directed.

Removing unserviceable stiffners below the top and supply and fixing the new stiffner of suitable size in dovetail joint between long rails size complete as directed.

Replacement of old unserviceable PVC buffers and S & F PVC buffers/rings of size 20mm dia and 15mm height to table as directed.

Table office officer wooden(Drawing No DB-4119)

Taking out old unserviceable leg of table and supply & fixing new leg made of Ist class hard wood (MP Teak) of suitable size including preparation of surface and applying high gloss French polish on newly fixed leg to match the colour with existing polished surface complete all as specified and directed.

-Ditto- all as per item No 35.01 but unserviceable long rail of suitable size complete.

-Ditto- all as per item No 35.01 but unserviceable short rail of suitable size complete.

Taking out un-serviceable table top of table, supply & fixing new table top made of teak wood suitable size or complete as existing as directed.

Taking out un-serviceable table drawer of table office, supply & fixing new drawer made of teak wood suitable size or complete as existing as directed.

Romoving unserviceable stiffners below the top and supply and fixing the new stiffner of suitable size in dovetail joint between long rails size complete as directed.

Replacement of old unserviceable PVC buffers and S & F PVC buffers/rings of size 20mm dia and 15mm height to table as directed.

CANNING :- Removing old canning from existing wooden furniture (any type) and supply & re-canning with virgin white plastic cane 2 mm wide and 0.4mm thick for seat and back and 3.00 mm wide and 0.6 mm thick for border, oval shape (half round) as per Godrej pattern complete all as specified and directed.

POLISHING :- Preparation of old wooden polished surfaces by rubbing down the old polish from the wooden surfaces with sand paper (mannually/by grinder machine), removing pluck marks with wooden scraper, cleaning of dirt and stopping holes by filling putty by adding colour of required quantity to obtain the desired colour, wiping old superfluous filler and allow to dry, rubbing off surface with sand paper until smooth surfaces is achieved, wiping off the polish from other than wooden surfaces with polish thinner and applying French polish of Ist quality as per manufacturer’s instructions till glossy finish is achieved for the following furniture items complete all as specified and directed. ( TO BE CARRIED OUT AT SITE/FURNITURE YARD OF ALL ITEMS)

Almirah large/medium with shelf (Drg Nos FD-1031/ 351, 350/243)

Bed Newar and Bed Plywood Top (Drawing No FD-21,245,246, 247,214,3970)

Book Shelf open Small

Book Shelf open Large

Book case library pattern

Bin soiled linen small

Book case

Chair Easy Cushioned

Chair Dinning Long Back

Chair Dining (Drawing Nos FD-16, 279, 228, 203)

Chair Easy (Drawing No FD-229)

Chair writing (Drawing No FD-250, 280)

Chair Wooden Bottom Without Arm (Drawing No FD- 56, 225, 285)

Hat stand with mirror

Sofa Chair single

Side Board

Stool Dressing CB (Drawing No 27,252,274)

Sofa Set 5 Seater (Drawing No FD- 373, 281)

Table Peg (Drawing No FD- 25, 236, 277)

Table Centre (Drawing No FD-29, 274, 235)

Teapoy (Drawing No FD- 64, 232, 278)

Table Dining 6/8 Person (Drawing No FD- 30, 239, 273, 376)

Table 3' X 2' with/without Drawer (Drawing No FD- 283, 284, 223, 224)

Table Dressing Ladies (Drawing No FD-251,378)

Table Dressing Gents (Drawing No FD-31, 230, 278, DB- 3980)

Table Bed Side (Drawing No FD- 28, 248, 276, 210, DB- 3956, 4049)

Table Writing (Drawing No FD- 249, 33.275 DB 3959)

Table JCO Modified

Table office clk wooden

Rack 3/4 spaces

Bin linen multipurpose (FD/E6/MAP/09)

Table 900mmx900mm

Table office officer

Table 5'x2'10''

Schedule of credit of Rs 86003.50 to be deducted during AOC

C GENDALAL AGRAWAL

Chetna Enterprises

Budget Furniture Industries