Repairing by replacement of different damaged components / spares for Diesel Driven Trolley Mounted 52 / 38 HP Pumps including supply of suction and delivery pipe lines to enhance the discharge capacity from low lying areas of Guwahati city.

Amount

Bearing NDE

Bearing DE

Spacer

Dowel - 6 MM x 25

O' Ring (Insert)

O' Ring (Sleeve)

Wave Spring Washer

Shim Pack

Gasket

Lip Seal

Drive Belts

Rapid fitting

Valve Ball

PVC Hose, 250 mm

Float Disc

Fulcrum Bracket

Fulcrum arm

Fulcrum pin

Valve Support Pin

Air Filter Element complete assembly

Diaphragm

Valve seat

Valve Ball

Valve body top

Main valve

Main valve rod

M10 nylon washer

Control valve

Central valve

Adjustable seat control valve

Knob-control valve

Spring

Filter Block Mesh

Sight Glass No. 2

Dipstick

O' Ring

Gasket for Coalescer unit

Filter Carrier

Nylon washer- M6

Sealing Ring

Filter element

Filter retainer

Rapid Fitting -1/8" BSP

Coalescer seal

Filter Mesh Retainer

Shoulder Ring

Impeller

Pump Shaft

Gland

Deep Groove Ball bearing Type SKF-6410

Thrust Ball bearing Type SKF-51312

Shaft sleeve

Bearing Housing

lantern ring

Liquid Deflector

Cartridge

Bearing Cover DE

Bearing Cover NDE

Thurst Bearing Adaptor

Keys set

Impeller nut

Bearing nut

Bearing Lock Nut

Compression spring

Wheel cock

Valve stem

Set of oil seals

Set of gaskets

Set of "O" rings

Set of Fasteners

Coupling bolt with bushing (assorted sizes)

Gland packing , Size: 10mm

Gland packing, Size: 12.5mm

Nuts and bolts (16 mm to 18 mm)

M.S. Washer (Assorted size)

Fan belt(Engine type 4R1040)

M Seal

Self starter Solenoid switch

Self starter carbon brush

Battery Terminal

W.B. Grease

Coolant

Distilled water

Red oxide primer

Antisol paint (blue/smoke grey)

Turpentine oil

Mobil Oil

Filter element (Engine type 4R1040)

Fuel filter (Dual) assy. (Engine type 4R1040)

Supply of 12 Volt 100 Ah Battery

Rubber gasket of 6mm thick for suction pipe of sizes:-a)350 mm

Rubber gasket of 6mm thick for delivery pipes of sizes:b)300 mm

Hydraulic oil Ep 68, 20 Ltr Pack

Filter element (Eicher Engine Model 422ES)

Fuel filter (Dual) assy. (Eicher Engine Model 422ES)

Sets of oil seals for 38 HP Pump

Sets of "O" rings for 38 HP Pump

Cartridge for 38 HP Pump

Shoulder ring for 38 HP Pump

Lantern ring for 38 HP Pump

Nylon rope

Coir rope

Complete overhauling of Self Starter & dynamo with self starter & dynamo armature rewinding with cost of material & allied works fitting of all accessories/components for trouble free operation for Eicher Engine Model 422ES

Feed pump Service Kit

Gasket for silencer

Gasket for extension manifold

Spider rubber L190

Eicher Mild steel 422 ES exhaust manifold

Supply of reputed make heavy duty best quality PVC hose pipe conform to ISI specification and flexible for Suction pipe line 38 HP pump to withstand pressure up to 4 Kg/sqm, size 6 inch dia and 15 M in roll.

6 inch dia Flap valve for pump suction

6 inch dia PVC Foot valve

G.I. Bend 6”

6 inch PVC Tail pipe

Heavy duty flexible hose pipe conforming to ISI specification for delivery pipe line of 38 HP Pump to withstand pressure up to 4 Kg/ Sqm-Size 6 inch in dia / 30 Mtr each Roll

Tyre of size 175/65, R15, 84H

Tube for 175/65, R15, 84H tyre

Supply, fitting and fixing of Vacuum pump model: LRV-1, Cap-50 cum/hr with vacuum gauge, 1 set coupling & water inlet valve with 5.5 HP, 2500 RPM petrol engine of reputed make with necessary GI pipeline along with required valves complete as directed.

Supply of reputed make heavy duty best quality armored rubber hose pipe conforming to ISI specification embedded with nylon thread fitted with M.S. flanges on both end and flexible, suitable for suction pipe line of trolley mounted pump to withstand pressure up to 3-4 kg/cm2 of 350 mm dia. And approx length 4.50 Mtr.

Fabrication, supply & fitting of M.S. Suction Strainer having dia. 600 mm and height 400mm to 500mm made from required sizes of M.S. Rod/Bar/Plate etc. complete with provision for fitting to 300mm/250mm dia. Suction pipe with flange containing holes at top complete as directed

Fabrication, supply, fitting and fixing of MS Bend of size 300mm dia. With flange having drilled holes of MS delivery/suction pipe to facilitate fitting in trolley mounted pump at site as directed

Supply of MS Pipe of 300mm dia. made from 6 mm thick plate and fitted with flange in both ends with hole for fitting for delivery of water from the trolley mounted pump at the rate of 350 ltr/sec of discharge with head 8-12 mtr complete as directed

Complete overhauling of Self Starter & dynamo with self starter & dynamo armature rewinding with cost of material & allied works fitting of all accessories/components & necessary electrical connection for trouble free operation for Engine type 4R1040

Supply and installation of water tank of size 2 ft x 2 ft x 2ft made out of M.S. Plate 6 mm thickness with provision of ½ inch size outlet nozzle including painting (2 coats) complete and with all necessary clamps etc. as directed and fixing in 52 H.P trolley mounted dewatering pump.

M/S M.B.K. ENTERPRISE (BID ID -259748)

S AND R ENTERPRISE (BID ID -259757)

M/S R.M. ENTERPRISE (BID ID -259124)

M/S SHIVAM ENTERPRISE (BID ID -259333)

SRI HITESH KALITA (BID ID -259415)

SRI DINESH BORAH (BID ID -259107)