GE/ALP (8595) KOLKATA OF 2025-26

Taking down cement plaster including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

Material and labour for rendering 15mm thick in CM (1:6) on other than fair face of brick work or concrete surfaces and finished the surface even and smooth without using extra cement complete all as specified and as directed.

Material and labour for rendering 15 mm thick, set in cement mortatr (1:4), as on brick/concrete surface etc finish even and smooth without using extra cement complete all as specified and as directed.

Material and labour for rendering 5mm thick with CM (1:3) as on concrete surfaces and finished the surface even and smooth as in ceiling including necessery scaffolding, chicken wire mesh etc complete all as specified and as directed.

Material and labour for preparation of new plastered surface of wall and applying two coats of oil emulsion distemper over and including a coat of primer and 3mm thick wall care putty on wall complete all as specified and as directed.

Material and labour for preparation of new plastered surface of ceiling and applying two coat of white wash on new surface etc, complete all as specified and as directed.

Material and labour for preparation of old plastered surface of wall and applying two coats of oil emulsion distemper over and including a coat of primer and 3mm thick wall care putty on wall complete all as specified and as directed.

Material and labour providing anti termite (post construction) along the external wall below concrete or masonary apron using chemical chloropyritphos 20 EC or linane 20 EC (ISI Marked) emulsion @ 2.25 literes per linear meter including drilling and plugging holes etc in aprons/plinth protection, complete all as specified and directed.

Material and labour Providing anti termite (post construction) of soil under existing floors using chemical Chloropyriphos 20 EC or linane 20 EC (ISI Marked) emulsion @ one leter per holes , 300 mm apart along the junction of floor and walls including drilling and plugging 12 mm dia holes with cement mortar 1:2 ( 1 Cement : 2 coarse sand) to match the existing floors complete all as specified and as directed.

Material and labour providing anti termite (post construction) at the point of contact of wood work by chemical emulsion ( in oil or kerosene based solution ) @ 0.50 leter / holes by drilling 6 mm dia holes at a downward angle of 45 degree at 150 mm centre angle of 45 degree at 150 mm centre to centre and sealing the same, complete all as specified and as directed.

Taking down chowkat or frames with shutter exc. 1.5 Sqm but n.exc. 4 Sqm each (without taking of shutters from the frames) complete all as specified and as directed.

Taking down chowkhat or frames with shutter not exc. 1.5 Sqm each (without taking of shutters from the frames) complete all as specified and as directed upto 12 storied bldg.

S&F for Factory made single extruded WPC(Wood polymer composite) solid flush door shutter of 30mm size comprising of virgin PVC polymer of K value 58-60(Suspension grade), calcium carbonate & natural fibres and non-toxic additives fabricated with mitre joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum density of 650 Kg/cum, screw withdrawal strength of 1800 N(Face) & 900 N (Edge), minimum compressive strength of 50 N/Sqm, modules of elasticity 850 N/sqm & resistance to spread of flame of class A category with property of termite/borer proof , water/moisture proof & fire retardant & fixing with SS butt hinges of required size with necessary full body threaded star headed counter sunk SS screws, complete all as specified and as directed.

S&F for Factory made single extruded WPC (Wood polymer composite) solid door Frames of size 45 x 70mm comprising of virgin PVC polymer of K value 58-60(Suspension grade), calcium carbonate & natural fibres and non-toxic additives fabricated with mitre joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 Kg/cum, screw withdrawal strength of 2200 N(Face) & 1100 N (Edge), minimum compressive strength of 58 N/Sqm and resistance to spread of flame of class A category with property of being termite/ borer proof, water/ moisture proof & fire retardant & fixed in position with MS hold fast/ lugs/ SS dash fasteners of required dia and length complete all as specified and as directed..

S&F for Factory made single extruded WPC(Wood polymer composite) wire mesh door shutter of 30mm size comprising of virgin PVC polymer of K value 58-60(Suspension grade), calcium carbonate & natural fibres and non-toxic additives fabricated with mitre joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum density of 650 Kg/cum, screw withdrawal strength of 1800 N(Face) & 900 N (Edge), minimum compressive strength of 50 N/Sqm, modules of elasticity 850 N/sqm & resistance to spread of flame of class A category with property of termite/borer proof , water/moisture proof & fire retardant & fixing with SS butt hinges of required size with necessary full body threaded star headed counter sunk SS screws,complete all as specified and as directed.

S&F for sliding 3 track are made out of upvc window with upvc multicavity section made of 108x48x2.5mm suitable reinforced of G.I. channel of 1.2mm thick having upward projection track for sliding shutter. Shutter are made

Supply and fix powder coated aluminium ventilator louver type with frame, aluminium section weighing 0.55 Kg/M including 4mm thick frosted glass and necessary joining cleats, glazing clips, rubber packing, side handles fixed to wall with fastener etc. incl taking down old steel ventilators complete all as specified and as directed.

Demolition of cement concrete of any description and in any position not other wise specifically provided for complete all as specified and as directed. (upto 12 storey High of building)

out of Upvc muticavity section of 85x38x2.5mm having suitable reinforement of G.I. C channels having provision to fit roller & Glass fixing with TPE rubber with proper glass bid & welded in corner with suitable locking system. by using above section , windows can be in different type like 2 glass 1 net complete all as specified and as directed

Supplying and fixing Mild Steel framed work such as grills, gratings, etc. with ends of bars shouldered and or riveted, or forged into spikes, framed guard bars, barred iron doors, railings and similar work conforming to Fe-290 Gde E-165, complete all as specified and as directed and design/shap approved complete all as specified and as directed.

Material and labour for preparation of old steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Material and labour for preparation of old wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Material and labour preparation of new steel and iron surfaces of any description area exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide and zinc chrome primer, complete all as specified and as directed.

Demolition of brick work built in cement mortar including all quions, arches, pillars etc complete all as specified and as directed.

Material and labour for brick work with sub class 'B' bricks built in cement mortar (1:6) straight or curved on plan exceeding 6 mtr mean radius and complete all as specified and as directed.

Material and labour for brickwork with sub-class `B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM (1:4) complete all as specified and as directed.

Material and labour for 18 to 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like over and including 15mm thick cement mortar bedding (1:6) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including dismantling complete all as specified and as directed

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed. (upto 12 storey High of building)

Dismantiling of floor hearth or wall tiling incl cement mortar (incl backing), and rubbish off the premises (out of MOD land), complete all as specified and as directed.

Material and labour 25mm thick PCC (1:2:4) type B-1 using 20mm graded stone aggregate as in bedding of tiles/kota complete all as directed at site.

Material and labour Non-skid coloured ceramic floor tiles 7 to 8 mm thick area of each tile exc 0.11 sqm but n exc 0.18 sqm in floor over and incl screed bed or bedding layer 15 mm thick in cement mortar (1:6) set and jointed in neat cement slurry and pointed in white or coloured cement to to match the shade of tiles complete all as specified and as directed.

Material and labour glazed ceramic coloured wall tiles of size 450x300x6mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles screed bed or bedding layer 10 mm thick in cement mortar (1:4) etc, complete all as specified and as directed.

M & L for double charge Vitrified Ceramic tiles light shade 8 to 9 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm as flooring with border of dark shed, over and including 15mm thick screed bed in CM (1:6) set and jointed in neat cement slurry and pointed in white or coloured cement to match in white or coloured cement to match etc complete all as specified and as directed

Material and labour for double charged vitrified ceramic coloured tiles 8-9mm thick (square /rectangular ) polished area of each tiles not exceeding 0.36 sqm as in floor over screed bed or bedding layer 15 mm thick in cement mortar (1:6) etc. set and jointed in neet cement slurry and pointed white or coloured cement to match the shade of the tiles laid over complete all as specified and directed .

Material and labour for double charged vitrified ceramic coloured tiles 8-9mm thick (square /rectangular ) polished area of each tiles not exceeding 0.36 sqm as in skirting screed bed or bedding layer 10 mm thick in cement mortar (1:4) etc. set and jointed in neet cement slurry and pointed white or coloured cement to match the shade of the tiles laid over complete all as specified and directed .

M&L Non-skid coloured ceramic floor tiles 7 to 8 mm thick area of each tile exc .11 sqm but n exc 0.18 sqm in floor Screed bed or bedding layer 15 mm thick in cement mortar (1:6) set and jointed in neat cement slurry and pointed in white or coloured cement to to match the shade of tiles .complete all as specified and as directed.

Chipping of unsound/weak concrete materials from slabs , lintel,chajja, fin, facia etc. by any means as directed by engr-in-charge including tapering all edges, making square shoulders of cavities air or sand blasting etc and cleaning of exposed concrete surface of lightly picking materials by air blasting or sand blasting incl foreign matrials, loose concrete/aggregate etc and disposal of all debris out of MOD land upto four storey bldg and complete all as specified and as directed for 25mm average thickness.

Deduct/add from item No. 38 here in before for every less/extra 5mm thick complete all as specified and as directed.

Material and labour removing of concrete all around reinforcement including from behind the reinforcing bars to give an avrage 25 mm (but not less than 15 mm clear air gap) by manual methods (using wire brushing, chiselling etc) and applying alkaline rust removing chemical followed by removing rust by emery paper and cleaning the area throughly by water and allow it to dry all as per manufacturer,s instruction to give it a totally rust free finished steel surface upto four storey bldg complete all as specified and directed. (Make: SIKA/FOSROC) upto 12 mm dia bar.

Supply and application of coat of Epoxy Zinc rich primer on the prepared steel surface excluding behind the bar by brush the primer shall have a minimium specific gravity 1.75 minimum weight film thickness/coat 40 microns and minimum adhesive bond strength with steel is 1.5N/mm2 upto four storie bldg complete all as specified and directed. Make: SIKA/FOSROC or equivalent make as approved by GE.

Material and labour for providing single coat of epoxy bond adhesive of prepared non metallic surface (existing surface) and applying by brush all as per manufactures instruction/specification. The bonding agent shall have minimum compressive strength of 40 N/Sqmm and complete all as specified and directed upto four storey bldg.

Material and labour for applying curing compound or equivalent, complete all as specified and directed. Over concrete surface as curing compound as per manufactures instructions, upto ten storey building complete all as specified and directed.

Supply, mixing and application two component structural grade polymer modified reinstatement mortar, where local spalling has taken place or shuttering is not possible . The morter can be applying in layers not exceeding 6mm thick in each layer in and upto any thickness in smaller vertical pockets and upto any thickness in horizontal applications. The mortar should have a minimium compressive strength 12N/mm2 in 1 day and 45N/mm2 in 28 days. Minimum flexural strength should be 8 N/mm2 in 28 days. A modified styrene butadience emulsion for use as a bonding aid and gauging liquid for cementious system to be mixed with cement slurry before the application of modified polymer mortar to be used @ 6 ltr/bag of cement. The bonding agent should have minimium compressive strength 24N/mm2. Minimum tensile strength 3.5N/mm2, minimium flexural strength 6.5N/mm2 complete all as specified and directed upto 25 mm average thickness and upto four storey High. Make :- Sika/Fosroc NOTE:- Cement and sand mortar in proportion of 1:2 graded coarse sand ) with polymer admixed in proportions approved by Engr-in-charge)

Dismantiling of Asbestos cement/FR Sheet ( Corrugated,semicorrugated, etc ) sheet in roof coverings and rubbish off the premises (out of MOD land), complete all as specified and as directed.

Supply and fix for pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping srews complete all as specified and directed.

Supply and fix MS rolled section as in roof purlins, rafters and truss etc of MS pipe fixed with iron cleats along with nuts & bolts of required size or section or welded conforming to Fe-290 Gde E-165 complete all as specified and directed.

M&L for PCC (1:2:4) Type B-1 ( using 20 mm graded crushed stone aggregate) as in sub base of floor,padding, over roof complete all as specified a

Material and labour APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) laid over bitumen coasted surface of roof applied with proper torch flames all as per manufactures instruction. NOTE:- The APP membrane will have an overlaping of 100 mm on the end laps and 150 mm on side laps. The overlaping and joints will be thermo sealed with the propare torch complete all as specified and directed.(upto 12 storey High of building)

Material and labour for applying protective coating with aluminium paint @ 0.2 kg/sqm complete all as specified and directed.(upto 12 storey High of building)

nd directed.

Material and labour for applying evenly a tack coat of industrial bitumon 85/25 at the rate of 1.2 kg per sqm including cleaning surface on roof surface for fixing APP membrane complete all as specified and directed.(upto 12 storey High of building)

Dismantling of existing water tanks and removinging to store and Supply and fix 1000 ltr capacity Rotational moulded polyethylene water storage tank (cylindrical vertical closed top) hoisted and fixed in positions all as specified in SSR Part-I,including 20 mm dia of ball valves high pressure of PTMT with epoxy coated aluminium rod &high density plastic ball screwed for iron pipe and fixed complete all as specified and directed.

Supply and fix 4.8 mm plain sheet glass ordinary quality and glazed with oil putty or fixed with fillets 2nd class hard wood of sectional area of glass not exc 0.5 sqm each pane complete all as specified and directed.

S&F powder coated aluminium Partition wall of frame size 80mm x 38mm x 2.00 mm with 5.5 mm thick gleass, standard beads/glazing clips, locking arrangement etc with necessary all fittings complete all as per manufacturer's instructions and complete all as specified and directed.

Supply and fix for aluminium (extruded section body) door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed etc, complete all as spcified and directed.

Supply and fix in repair Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame including 5mm thick PVC fillets of width 35mm including necessary caping/fillets at top, bottom, middle and junctions required as per site etc complete all as per specified and directed.

Supply and fix for powder coated aluminium door shutter with frame fixed including roller machine with rubber gasket, stopper, cleats, handles etc complete incl aluminium door styles of size 80 mm x 38 mm x 2.00 mm and aluminium door section of top, bottom and lock rail shutter frame of 80 mm x 38mm x 2.00 mm taking down old door with necessary all fitting and all necessary fittinngs complete all as specified and as directed.

Material and labour 9 mm thick prelaminated partilce boards interior grade prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with screw to timber frame for pelmet boxes, aluminium door and aluminium partitions complete all as specified and directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) of insulation boards/slabs/blankets, any thickness, including cover fillets complete all as per specified and directed.

Material and labour for suspended false ceilling (Decorative Type) system using chicogo metalic (E grid) exposed suspende system, grid section size 600mm x 600mm comprising of GI powder coated main runner of dimension 39 mm x 24mm x 0.80mm thick ( thickness comprising of GI/0.4+ PPPCGS/0.3mm & weight of Runner 1.35 kg for 3600mm length) Cross Tee of dimensions 29mm X 24mm x 0.8 mm thick wall angle 22.2mm x22.2mm x 0.65 mm thick ( thickness comprising of GI/0.35 + PPPCGS/0.3 mm & Weight of angle 0.70 kg for 3050 mm length) with and including 6 mm thick HPSC ( High pressure steam cured) pre- primed, self embossed textured designer board, water resistant termite resistant, fire resistant for insulation and accustic purpose to be placed in the grid system duly suspended with 4 mm dia G I bars hangers fixed with steel dash through fasteners from purlins of the roof with butterfly clips (Wt- 0.007 Kg/clip) hold down clips (Wt - 0.0035 Kg/clip) with Provn of light fixture complete all as per specified and directed.

All as per item No 60 here in before but only for refixing the serviceable false ceiling incl aluminium section complete all as per specified and directed.

M&L for 10 mm thick Gypsum board false ceiling joint less work including application of putty over gypsum board to achieve smooth and joint less celing surface and applying two coat of oil bound distemper in ceiling surfaces including framed work for consisting of 60 mm wide GI steel 'C' section of as in main of 0.71mm thick and 60 mm GI channel section as in cross member of 0.63 mm thick and GI steel angle section as in suspenders of size (25x20x0.63) mm and wire cloth of 0.71 mm dia of wire and (100x50)mm aperature size including cutting , riveting, steel fastener, drilling holes in RCC roof and securing with screws etc complete all as specified and directed.

M&L POP cornice width n.exc 200mm wide in ceiling edge of any design and shape ,complete all as per specified and directed.

Supply and fix solid PVC Mouded Door Frame of size 50mm x 47mm made out of 5mm Moulded/printed PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as per specified and directed.

Supply and fix factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face with partical board core complete all as specified and as directed.

Supply and fix stainless steel butt hinges medium weight 100mm long etc complete all as specified and directed.

Supply and fix 200 mm long aluminium anodised, barrel tower bolts of extruded section complete all as per specified and directed.

Supply and fix 150 mm long aluminium handles, cast type, anodised complete all as specified and as directed.

Supply and fix for curtain rods decorative aluminium alloy including taking down old pelmet box making wood on wall complete all as per specified and directed.(upto 4 storey of building)

Supply and fix bracket decorative type for curtain rods aluminium alloy complete all as per specified and directed. (upto 4 storey of building)

Supply and fixing for stainless steel wire cloth of 0.36 mm nominal dia of wire and average width of apperture 1.40 mm and fixed with stainless steel staples in steel / wooden / aluminium frames complete upto four storied bldg complete all as per specified and directed.

Supplying and laying for 20 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches/walls including all fitting in any grade complete all as specified and directed.

Supplying and laying for 25 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches/walls including all fitting in any grade complete all as specified and directed.

Taking up or down 15mm steel tubing and connections, including cleaning for re-fixing or removal complete all as specified and as directed.

Taking up or down 20mm steel tubing and connections, including cleaning for re-fixing or removal complete all as specified and as directed.

Supply and fix in repair 20mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipes complete all as specified and as directed.

Supply and fix in repairs Vitreous China wash basin (coloured), Pedestal pattern, boul size (580 x 450) mm, excluding taps, waste,chain and plug and porcelain stopper but including brackets, complete all as specified and as directed.

Cutting grooves/chases in cement concrete or brick wall / floor for taking down of GI pipe line and making good the disturbed surfaces to match with existing specification complete all as specified and as directed.

Supply and fix 32 mm bore waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed.

Supply and fix in repair 15 mm bore fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed.

Supply and fix in repair brass CP toilet paper holder to wall with chromium plated brass screws complete all as specified and as directed.

Supply and fix in repair Soap dish, vitreous China white, approximate size (160x 160x90)mm embedded in the wall etc, complete all as specified and as directed.

Supply and fixing in repair wash down water closet (pedestal pattern) including seat cover ,connection to drain (or outgoing pipe) and to flush pipe etc. and making good the damaged surfaces complete all as specified and as directed.

Supply and fix in repairs 10 litres capacity PVC valveless, syphonic action type, flushing cistern, white colour, low level, white with inlet, ball valve, float and handle including brackets duly painted, 32mm dia PVC flush pipe complete all as specified and as directed.

Supply and fix in repair 15mm bore Brass CP angular stop cock concealed or any type with crutch or butterfly handle complete all as specified and as directed.

Supply and fix in repair PVC connection 15 mm size pipe with PTMT nut of Length 450mm complete all as specified and as directed.

Supply and fix in repairs 15mm bore two way bib tap CP fancy type with chromium plated crutch or butterfly handle complete a

ll as specified and as directed.

Supply and fix in repair brass chromium plated shower rose 125 mm size including fixing to steel pipe or union complete all as specified and as directed.

Supply and fix in repair wall mixture non telephonic brass CP tap for mixing hot and cold water including three joints to 15 mm bore pipes or union and pluging and screwing to wall complete all as specified and as directed.

Supply and fix in repair wash hand basin mixture Brass CP tap for mixing hot and cold water including three joints to 15 mm bore pipes or union and pluging and screwing to wall complete all as specified and as directed.

Supply and fix for sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed Make: Prayag/Xen or equivalent make as approved by GE.

Supply and fix 40mm bore CPVC pipe with fittings complete fixed in wall/laid in floor complete all as specified and as directed.

Supply and fix 75mm bore PVC(SWR) pipe single socket in any length rubber ring joints complete all as specified and as directed.

Demolition of Reinforced Cement concrete in Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work up to four storied bldg complete all as specified and as directed.

Supply and fix in repairs for 75 mm diameter of outlet of PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed.

Material and labour for mild steel TMT bars 10MM dia and over, cut to length, bent to shape required including cranking, bending, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming complete and all as specified and directed.

Material and labour for machine cut kota stone slab flooring 20-25mm thick, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab rubbing and polishing over and including over 15mm thick screed bed in CM (1:6) complete all as specified and directed.

Material and labour for treating the surface of old kota stone slab flooring with beewax polish complete all as specified and directed.

Supply and fix in repair CI Nahani trap of 100mm dia, including jointing to waste pipe fixed in cement concrete, (1:2:4) type B1 ( using 20 mm graded crushed stone aggregate) complete all as specified and as directed.

Supply and fix in repairs CP grating of 100mm dia, fixed with cement mortar (1:3).complete all as specified and as directed.

Material and labour for RCC (Nominal Mix) in type-B1 1:2:4 (20mm graded stone aggregate) pre cast slabs supported on walls for cup board, counter basin and Kitchen slabs, manhole cover etc complete all as specified and directed.

Supply and fix 18 mm thick Plywood, grade BWP, type BB, fixed with screws to timber frame as kitchen cabinate, key board including all fitting and fixture items work incl taking down old plywood complete all as per specified and directed..

Supply and fix 12 mm thick PVC Plywood, grade BWP, type BB, fixed with screws to timber frame as kitchen cabinate, key board including all fitting and fixture items work incl taking down old plywood complete all as per specified and directed..

Supply and fix 6mm thick plywood in cupboards complete all as specified.upto 12 storied bldg incl taking down old plywood complete all as per specified and directed.

Supply and fix 30mm width of flaps Hydralic type hinges mild steel bright finish or elec-trogalvanised complete all as specified and directed.

Supply and fix for brass locks, cupboard, grade I, size 50 mm two levers all as specified and directed.

Supply and fix ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed all as specified and directed.

Supply and fix in repair brass sliding door bolt 300 mm long with sand or dia-cast brass hasp, staple ( Bolt type) and fixing with rolled or drawn brass bolts complete all as per specified and directed.

Supply and fixing in repair for 18/19mm thick block boards, grade 2 quality, interior grade, decorative type with decorative face veneer on both face fixed with screws to timber frame work as in cupboard shutter, Kitchen cabinate, work station etc. including external teak wood lipping 6mm thick fixed with nails incl taking down old particle board complete all as specified and as directed.

Supply and fixing for 0.9mm thickess of decorative laminated type 1 of surfaces finish, colour and pattern as approved fixed with approved adhesive as per manufacture,s instruction complete all as specified and as directed.

Supply and fix 100 mm long Brass handles, cast type, polished bright complete all as specified and as directed.

Excavating in post holes (or similar holes) each n exc 0.50cu.m gettingout returning filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm in hard dense soil complete all as per specified and directed.

M & L for Machine pressed precast coloured concrete interlocking paver block any shape and size(Rubber moulded) confirming to IS 15658-2006 of 60mm thickness M-35 grade with Grey cement and pigment complete all as specified and directed.

Material and Labour for 20 mm thick pre-polished cement concrete designed coloured Cheuered tiles glossy finish as in floor set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of the tiles and laid over and including 15 mm thick screed bed in cement mortar (1:6) complete all as specified and as directed.

M & L for 75mm thick cement concrete type C-2 (1:3:6) using 40mm graded stone aggregate as in plinth protection,sub base similar works complete all as specified and as directed.

M & L for PCC (1:3:6) Type C2 using 40mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and directed.

M&L for 50mm thick sand cusion under layer of floor complete all as per specified and directed.

Taking down carefully copper/aluminium point wiring (light,fan,socket etc.) complete including fittings such as switch, ceiling rose, light fittings, regulators etc. and making good to the disturbed surface of walls, floors etc. complete all as per specified and directed.

M&L for complete removal of existing old surfaces of RCC member and preparation of old or previous untreated surfeces and finally applying two coats of Anticarbonation paint complete all as specified and directed.

M&L for point wiring for one light/ bell/ fan controlled by one number one way switch for 5Amps SSC complete with 1100V grade FRLSH PVC insulated unsheathed multistranded copper conductor cable conforming to IS : 694 of size 1.5 Sqmm two runs single core for phase and neutral drawn through in and including PVC concealed conduit of suitable size (minimum 20mm dia medium grade ISI Marked) complete with one run of 1100V grade FRLSH PVC insulated multistranded copper conductor cable 1.5 Sq mm single core green colour for earth continuity conductor and connecting to common earth dolly incl provn of modular type galvanized MS sheet pressed sunken box not less than 1.00 mm thick concealed on wall including fixing of modular cover plate of suitable modules with fixing screws, for fixing of modular type switches / socke t/ Fan regulator etc. complete including making good of disturbed surfaces of wall/ceiling/floor in same specification as per existing surrounding surface complete all as specified and directed. Note : Proper colour code of wiring to be maintained.

All as per item No. 121 here in before but for 5 Amps Socket on same board complete all as specified and directed.

All as per item No. 121 here in before but for 5 A socket point on independent board complete all as specified and directed.

All as per item No. 121 here in before but for 15 A socket point independent with 2.5 sqmm 1100V grade FRLSH PVC insulated copper conductor complete all as specified and directed.

All as per item No. 121 here in before but for AC point independent with 4.0 sqmm 1100V grade FRLSH PVC insulated copper conductor complete all as specified and directed.

S & F Modular type switch, one way 6 Amps , 1 module complete all as per specified and directed.

S & F modular type socket 5 pin, 6 Amps 2 module complete all as per specified and directed.

S & F Modular type socket 5 pin, 16 Amps 2 module complete all as per specified and directed.

S & F Modular type switch, one way 16 Amps, 1 module complete all as per specified and directed.

S & F Modular type fan regulator step type(2 module)120 Watt complete all as per specified and directed.

S & F Ceiling rose, 3 terminal, PVC/ polycarbonate isolated body, 230 V complete all as per specified and directed.

S & F LED light fitting wit high out put diffuser 4 feet, 20 watt 220 V AC decorative type with inbuilt driver and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

Taking down carefully Existing Old U/S PVC Exhaust Fan/Wall mounted fan and Supply & fixing PVC Exhaust fan 250mm complete all as specified and as directed.

S & F LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with inbuilt driver, suitable for roof ceiling including connecting up with driver three core flexible copper conductor wire of suitable size complete all as specified and as directed. Make : Crompton , Cat No. : LCTLRNE-36-FO-CDL Havells (CAT No- VENUSNEOHE4x1PLR36W LED8576)/ Philips(CAT No-

RC38BBLED36S-6500PSUOD WHPIR)

Taking down carefully LED Celing light fitting/tube light fitting and refixing after completeion of E/M and B/R works at the same/new location complete all as per specified and directed.

Materials and labour for earthing complete with galvanised iron earth plate electrode 600 mm x 600 mm x 6 mm thick, burried directly and preferably vertically in ground, earth pit not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 m below ground level connetced with galvanised strip of size 32 x 6mm by means of nuts, bolts, check nuts and washers made of galvanised iron or steel earthing lead to be protected by galvanised iron pipe 40 mm bore (medium grade) and other end connected to earthing test point or lightening arrestor or main controlling switch as directed including providing funnel with 20mm bore galvanised iron pipe (light grade), wire mesh, charcoal or coke and common salt in alternate layer of 15cm (compacted thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1 (with 20mm graded aggregate), 50mm thick precast RCC (1:2:4) cover slab (re-inforced with 8mm dia TMT bar @ 15 cm C/C bothways and suitable handle made of 10mm dia) including necessary earth work in excavation, returning filling and removal of surplus earth upto a distance not exceeding 50 m etc all as shown on electrical plate No. 3 of MES Schedule Part-I(2009) complete including testing on completion all as specified and as directed.

S & F modular type 32 A Motor starters (for AC) white clour complete all as per specified and directed. Make:-Legrand/Anchor(Roma)/Crabtree