Provision of Replacement of upholstery of sofa, chairs etc. in Kidwai Bhawan CGM office 2nd floor and H. F section, New Delhi.

Replacement of upholstery of sofa, chairs etc. as per following procedure - (i) Taking out existing upholstery and disposal of unserviceable material within 50 metre lend. (ii) Providing and fixing 25mm thick form, casement cloth and/or markin fabric, and finally new upholstery cloth/fabric of approved quality and manufacture (basic cost of fabric/cloth shall not be less than Rs.250.00 per running metre having standard available width) including stitching as per existing pattern on seat, back, armrest etc. wherever required. (iii) French spirit polishing (wherever required) to exposed wooden surface to desired finish to give a good uniform look. (iv) Minor repairs to sofa or chairs such as nailing or fixing of loose joints, re-welding of steel parts, fixing missing screws, bolts etc. are included in item. The rate shall include cost of all labour and material as above. Nothing extra shall be paid if the furniture is to be taken to factory for replacement of upholstery or for minor repairs.

Single seater full upholstery sofa seat of size up to 600 x 600 mm (length of the fabric to be consumed shall be 4.50m ± 10% variation) .

Triple seater full upholstery sofa seat of size up to 600 x 600 mm (length of the fabric to be consumed shall be 12.00m ± 10% variation) .

Replacement of upholstery of sofa, chairs etc. as per followng procedure - (i) Taking out existing upholstery and disposal of unserviceable material within 50 metre lend. (ii) Providing and fixing 25mm thick form (density 25 to 30 kg/cm3), casement cloth and/or markin fabric, and finally new upholstery cloth/fabric of approved quality and manufacture (basic cost of fabric/cloth shall not be less than Rs.200/- per running metre having standard available width) including stitching as per existing pattern on seat, back, armrest etc. wherever required. (iii) Minor repairs to chairs comprises of re-welding of steel parts, fixing missing hardware viz screws, bolts etc. (Note: The rate shall include cost of all labour and material as above. Nothing extra shall be paid if the furniture item/s is to be taken to factory for replacement of upholstery or for minor repairs.

Low back visitor chairs, computer chairs etc. (length of the fabric to be consumed shall be 1.50m ± 10% variation)

High back executive chairs and like (length of the fabric to be consumed shall be 3.00m ± 10% variation) .

Supplying sofa set seat 100mm thick having 40 kg/cm3 density with size 530mm x 550mm with variation of ± 5%) and of approved quality. (Sleeepwell/Kurlon or equivalent)

ZIYA ABBAS (BID ID -814230)