PROVN OF PU FLOORING AT HANGE NO. 4 AT BFTS AND OTHER SANCTION WORKS UNDER GE (AF BAMRAULI

Amount

M&L for complete removal of existing damaged PU flooring by heating or by manually , including removal of floor grouting joints and preparation of old existing concrete floor surface of any description and in any position by brooming down / wire brushing , mechanical floor grouting, blower, vaccum cleaner etc levelling the floor and providing 6 mm (minimum) thick polyurathene based Anti static flooring system laid with adhesive all as specifed by Manufacturer as specified and diretced.

M&L for surface preparation openening of cracks (if any) in V shape , removing and cleaning joints and filling the same with polyurathene based sealent after priming the exisitng surface complete all as specified and directed.

M&L for removing and cleaning old sealent/ bitumen joints of size 20 mm wide and 30 mm depth(expansion/construction and dummy joints)incl removing filled materials and cleaning the joint with brush and removing all loose fine particle with compressed air and filling the same with polyurethane based sealent compound after priming with suitable primer complete all as specified and directed.

M&L for surafce prepation , supply of material and apply polyurathene based demarcation system of 15 to 25 cm wide line by using 100 micron thick self adhesive copper tape complete all as specified and directed.

Material & Labour for providing & applying Polyurethane yellow marking paint 100mm wide complete all as specified and directed.

M&L point wiring with PVC insulated FRLSH 1100 Volts unsheathed cable 1.5 Sqmm multistranded copper conductor and drawing concealed in wall & including rigid PVC conduit FRLS, medium grade ,ISI marked ,terminal box of 1.6 mm thick and 3 mm thick hylam sheet cover for terminal boxes also including porvision of earth wire PVC insulated FRLS 1100 Volts unsheathed 1.5 sqmm stranded copper conductor single core cable connected to common earth dolly One light/fan/bell point controlled by one by one way switch.

M&L for Modular switch 1 way 6A, 1 module, flush button single pole, one way, complete as specified and directed by Engineer in charge.

S&F ceiling rose 3 phase PVC polycorbonate,isolated body.

S&F LED batten luminaire surface mounted, 4 feet system wattage of 20 Watts, system lumen efficiency >90 lumen/watt, 6500k and including connecting from ceiling rose to fitting incl taking down old unsv light complete all as specified and directed.

S&F LED batten luminaire surface mounted,2 feet system wattage of 10 Watts, system lumen efficiency >90 lumen/watt, 3200k and including connecting from ceiling rose to fitting incl taking down old unsv lightcomplete all as specified and directed.

Supply and fix in replcement flood light 30 watt 240 volt 50 Htz 3000/6500K 120 lumen/watt IP-65 complete all as spd and directed.

S&F surface /ceiling mounted, round LED down light fitting 18 watts with die cast aluminium housing and system wattage of 18W, including connecting up with PVC sheathed 3 core 1.5 Sqmm copper conductor flexible wire fixed complete all as specified and directed.

Supply and fix LED 2 X 2 ft backlite surface mounted fitting 36/40 Watts not less than 3200lm with Metallic CRCA powder coated body with high efficiency opal/PMMA diffuser with system efficacy > 80 lm/W, CRI>80, color temperature >5700k, IP 20, Power factor<0.95, THD<10%, 50000 burning hours , Ambient temperature 0 to 500 DegC, Driver should meet IEC complaint for safety, with voltage variation range of 150-270 V and surge protection of 2.5 KV including necessary fixing arrangementsfixed complete all as specified and directed.

Sub main wiring with 2 run of single core PVC insulated and PVC Unsheathed, multistranded copper condutor of nominal area 1.5 sqmm FRLS, 1100 Volts grade cable drawn into and including rigid non metalic PVC Conduit of including all fittings and one run of PVC insulated and PVC unsheathed, multistranded copper conductor of nominal area 1.5 sqmm FRLS 1100 volts grade cable continuous earth wire of green colour code complete. Note:- (a) Two runs of 1.5 sqmm cable and one run of 1.5 Sqmm cable as earth lead with conduit shall be measured as one unit length for payment. (b) Quoted rate shall deem to be included cost of cutting chasses in wall for concealling conduit and making good to match with existing finish.

Supply and Fix 30 W High efficient LED Street light fitting with pressure die cast LM6 Aluminum housing and has lenses specially designed for Street Lighting with polycarbonate cover. System level efficacy of the Luminarie is 100lm/W with a life class of 50,000 burning hours at L70. The color temperature is around 6500 K with a color rendering index of 70. The luminaire is IP:66 protected with IK05 impact resistance. It has an electronic driver complaint to IEC safety standards with a power factor>.0.9, voltage variation range 120-270V, THD<20%, High and low protection along with a surge protection of 4 KV including 40mm dia GI light grade pipe1.5 meter length bend to shape and necessary clamps etc for fixing the light fittings on pole fixed complete as specified and directed.

Supply and fix 10/12 watts bulkhead fitting with powder coated die cast aluminium housing with glass/ non yellowing polycarbonate cover, IP65 Protection, System level efficacy of the Luminary is > 90 lm/W with a life class of 50,000 burning hours at L70 criteria, Power Factor >0.95, driver with Voltage range 150-270V, Temperature range 0 to 50 Deg, Driver efficiency >85%, THD<10%, CRI>80, Color Temperature-6500K, Surge protection of 4.0 KV, including connecting up with necessary PVC sheathed 3 core 1.5Sqmm copper conductor flexible wire fixed complete all as specified and directed.

Note :- Credit shown in credit schedule of tender document shall be considered by the tenderer while quoting the rates of various items of this schedule. The same shall be recovered from various payment to contractor before handing over old material.

A S ENTERPRISES

M/S V K MEHROTRA

M/S KESRI WORKERS

R K CONSTRUCTION COMPANY

M/S SWASTIK BUILDERS

M/S SATISH KUMAR

Mohit Enterprises