PERIODICAL SERVICES AND PAINTING OF VARIOUS BUILDING AND CONNECTED WORK IN TECH AREA AT 3 BRD AF STN UNDER GE (AF) MC CHANDIGARH

M&L for preparation of old wood or wood based surfaces over 10cm width or girth, not otherwise described and applying one coat of synthetic enamel paint, complete all as specified and directed by Engr-in-Charge.

M&L for preparation of old steel or iron surfaces over 10cm width or girth, not otherwise described and applying one coat of synthetic enamel paint at any height complete all as specified and directed by Engr-in-Charge.

M&L for preparation of old plastered/concrete surfaces of walls and applying one coat of oil bound distemper, white or tinted at any height including necessary scaffolding etc complete all as specified and as directed by Engr-in-Charge.

M&L for preparation of old plastered/concrete surfaces of walls and applying two coats of oil bound distemper over a coat of primer with 3 mm thk putty as required, white or tinted at any height including necessary scaffolding etc complete all as specified and as directed by Engr-in-Charge.

M&L for preparation of old plastered /concrete surfaces of ceiling and applying one coat of oil bound distemper, white or tinted at any height including necessary scaffolding etc complete all as specified and directed by Engr-in-Charge.

M&L for preparation of old plastered /concrete surfaces of ceiling and applying two coats of oil bound distemper over a coat of primer with 3 mm thIck putty as required, white or tinted at any height including necessary scaffolding etc complete all as specified and directed by Engr-in-Charge.

M&L for complete removal of existing treatment by scrapping and sanding with mechanical wall sander (having mechanical vacuum mechanisum) having RPM not less than 1500, sanding pad of of diameter of 7'/9' using a 80 grit sand paper to make the surface free from dust , loose paint etc. by skilled labour complete all as specified. Note : Stage Passing shall be done by GE.

M&L for one coat of acrylic water based exterior grade primer @ 1L/11 sq. mtr diluted with water in 1:1 ratio to be applied using an airless spray machine of with a flow rate of 2L per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface for painting of subsequent coats

M&L for two coat water based premium acrylic smooth exterior emulsion of approved colour with silicon additives, with heat reflectant property which can reduce the painted surface temp, by 5 degree and gives excellent protection against UV attack with VOC less than 50 gram/litre as per the LEEDS specifications, Anti Algal properties in two coats @ 1L/6sq mtr diluted with water as per manufacturer instructions with airless spray machine of paint application with a flow rate of 2L per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface in both the coats of paint, at any height, complete all as specified and directed.

M&L for preparation of old plastered/concrete wall surface and applying one coat of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 Sqm complete all as specified and directed.