REPAIR REPLACEMENT OF INTERNAL ELECTRIFICATION EXTERNAL ELECTRIFICATION AND EXTERNAL WATER SUPPLY WORK AT ZONE L AND M UNDER GE (SOUTH) BANGALORE

Amount

Taking down copper/aluminium point wiring (light, fan, socket or power) complete including fixtures and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing unserviceable materials and making good disturbed surfaces of walls, floors etc. complete all as specified and directed.

M&L for point wiring surface type with single core 1.5 Sqmm PVC insulated unsheathed single core multistranded copper conductor cable (FRLS)including 1.5 Sqmm PVC insulated unsheathed copper conductor as earth continuity conductor drawn in and including ISI marked PVC casing caping not less than 20mm width with its accessories, and fixed in existing sunken boxes and covered with new 3.00 mm thick ISI marked laminated sheet cover and brass screw with cup washers for fixing switches/sockets/regulators etc. for one light/CB/fan point controlled by one switch complete all as specified and directed.

All as per item No. 2 here-in-before but for one 3 pin 5 Amps socket point on the independent board complete all as specified and directed.

All as per item No. 2 here-in-before but for one 3 pin 5 Amps socket point on the same board with other switches complete all as specified and directed.

All as per item No. 2 here-in-before but for one light point controlled by two two way switches complete all as specified and directed.

All as per item No. 2 here-in-before but but with cable 2.5 sqmm including 2.5 sqmm cable as earth wire for 15/16 amp socket complete all as specified and directed.

S&F switch piano, flush type single pole, one way 5 Amps complete all as specified and directed.

S&F switch piano, flush type single pole, two way 15 Amps complete all as specified and directed.

S&F switch socket outlet 2 in 1, 3pin, 5A complete all as specified and directed.

S&F switch socket outlet 2 in 1, 3 pin, 5 Amps and 15 Amps flush type complete all as specified and directed.

S&F ceiling rose surface bakelite 65x50 mm two to three terminals complete all as specified and directed.

S&F in repair stepped type electronic fan regulator flush type, 230 volt, AC complete all as specified and directed.

S&F bell push, flush type, 5 Amps complete all as specified and directed.

S&F call bell AC, 230 volts single pole complete all as specified and directed.

S&F MCB, DB double door type, made out of CRCA mild steel sheet flushed in wall, SPN 4 way with 200 Amps rated bus bar, 240 volts IP-43, with PVC MCB blanking plates, stove enamelled, dust and vermin proof suitable for incorporation of MCB's and isolators etc including taking down old unserviceable one complete all as specified and directed.

S&F MCB, DB double door type, made out of CRCA mild steel sheet flushed in wall, SPN 8 way with 200 Amps rated bus bar, 240 volts IP-43, with PVC MCB blanking plates, stove enamelled, dust and vermin proof suitable for incorporation of MCB's and isolators etc including taking down old unserviceable one complete all as specified and directed.

S&F in repair MCB TPN 415 Volt 63 Amps complete all as specified and directed.

S&F in repair MCB SPN 6-40 Amps, 240 Volts complete all as specified and directed.

S&F in repair MCB SP 06-40 Amp, AC, 240 volts complete all as specified and directed.

M&L for sub main wiring surface type with two runs of single core, PVC insulated, unsheathed multi standard copper conductor cable of size 4 Sqmm, 1100 volts grade (FRLS) and one run of 4 Sqmm PVC insulated multi stranded copper conductor for earth continuity conductor drawn through existing conduit complete all as specified and directed. (Note :- Two runs of 4 Sqmm cable, one run of 4 Sqmm continuity earth wire will be measured as one length).

S&F in repair surface mounted mini light LED batten 1 feet with extruded aluminium housing and robust construction 5Watt system lumen with all accessories if required flexible copper 2 core wire from fitting to ceiling rose complete all as specified and directed. Make:- Bajaj cat part No-BCLSB 05 WH or equivalent in Wipro/Philips.

S&F in repair surface mounted mini mirror light LED batten 2feet with extruded aluminium housing and robust construction 10 W system lumen with all accessories if required flexible copper 2 core wire from fitting to ceiling rose complete all as specified and directed. Make:- Bajaj cat part No-BCLSB 10 WH or equivalent in Wipro/Philips.

S&F in repair surface & wall mounted LED batten 4feet with extruded aluminium housing and robust construction 20 W system lumen including flexible copper 2 core wire from tube light fitting to ceiling rose required length with all accessories complete all as specified and directed. Make:- Bajaj cat part No-BCLSB 20 WH or equivalent in Wipro/Philips.

S&F in repair LED Bulkhead light fitting 10 Watt environmental friendly, ultra modern, energy saving, surface mounted, decorative oval bulk head edge lit LED luminarie comprising of high brightness LEDs including connetcion of fllexible copper wire 2 core from fitting ceiling rose/connection point complete all as specified and directed. Make:- Bajaj cat part No. BIBWP 10W LED or equivalent in Wipro/Philips.

M&L for opening, cutting and taking out complete winding coils of ceiling fan of 1200/1400mm sweep of any make, rewinding the same with super enamalled copper winding wire as per original pattern including varnishing complete and assembling after oiling, greasing and replacing the worn out nut, bolts, washers and bearings etc including testing the ceiling fan on load for two hours complete all as specified and directed.

All as per item Srl No. 25 here-in-before but exaust fan of sweep 250/300mm.

M&L for earthing complete with GI earth plate electrode 60 cm x 60 cm x 6 mm thick burried directly in ground (earth plate not less than 2.25 Metre deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level connected to galvanished earth wire 4.0 mm dia by means of bolts, nuts check and washers of GI or steel all as shown in electrical plate No. 3 of SSR Pt -I connected to earthing test point all as specified or indicated including GI pipe 15 mm dia light grade for earth wire protection, necessary excavation, earth work in any type of soil, PCC (1:3:6) type C-1 (with 20mm graded stone aggregate),chamber and 50mm thick precast RCC (1:2:4) cover slab re-inforced with XPM Jalli including necessary earth work in excavation, returning filling and removal of surplus earth upto a distance not exceeding 50 m etc all as shown on electrical plate No. 3 of MES Schedule Part-I(2009) complete including testing on completion and taking down old one all as specified and as directed .

S&F ceiling fan complete with electronic type regulator and accessories 230 V, 1200mm sweep, ISI standards, RPM1200, 340 Air Delivery 200CMM, down rod length 267mm, rust - free powder coated finish and pre-wired and including connecting up with twin core twisted flexible copper conductor cable with connector including dismatling old one and deposit to AGE E/M Store yard complete all as specified and directed. Make :- Bajaj Kassels 50 ISI Product code 250468 or equivalent in Havells/Crompton.

S&F PVC Body sound proof Exhuast fan 250 mm size with single phase 230 Volt 900 RPM with louvers complete incl making a hole in wall or existing window grill cutting and 12mm plywood suitable size of exaust fan making hole and fixing the window nut bolt washers including finishing the distrubed surfaces of wall making good complete all as specified and directed. Make:- Bajaj Product code 70049 or equivalant to Havells/CGUsha /Baja/CG

Excavation in trenches in not exceeding 1.5 M wide and not exceeding 1.5 M in depth for laying of UG cables and LT Panel board foundation etc and getting out in hard/dense soil complete all as specified and directed.

Returning, filling in including spreading, levelling, watering and well ramming in layers not exceeding 25 cms in any type of soil complete all as specified and directed.

Removing excavated soil to a distance not exceeding 50 mtrs and depositing where directed at a level not exceeding 1.5 M above the starting point complete all as specified and directed.

M&L for sand cushioning to under ground cable in layers ( 8 cm before laying the cable and 15 cm after laying the cable and punned into 18 cm thickness) in trenches for cable protection complete all as specified and directed. Note : - Punned thickness only will be measured and paid under this item.

Supply and lay burnt bricks of sub class 'B' laid dry across in trenches for cable protection complete all as specified and directed.

M&L for PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundation, mass concrete for road crossing etc., complete all as specified and directed.

M&L for PCC 1:3:6 type C1 (using 20mm graded stone aggregate) as in foundation, mass concrete for road crossing etc., complete all as specified and directed.

S&F 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 mtr apart including 4 mm suspension wire, one twin core cable flat of size 06 Sqmm complete all as specified and directed.

S&F 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 mtr apart incl 4 mm suspension wire, one twin core cable flat of size 10 Sqmm complete all as specified and directed.

Supply, laying and testing cable XLPE insulated, screened, PVC bedded galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 Sqmm x 2 core including taking down old unserviceable UG cable complete all as specified and directed. Note:- Excavation,sand cushioning, bricks laying shall be measured and paid seperately under relevant item of this schedule.

All as per Item No 39 here in before but of size 16 Sqmm x 4 Core etc complete all as specified and directed.

All as per Item No 39 here in before but of size 25 Sqmm x 3.5 Core etc complete all as specified and directed.

All as per Item No 39 here in before but of size 25 Sqmm x 3.5 Core etc complete all as specified and directed.

M&L for preparation of surfaces of pole for painting of steel tubular pole, vertical with one coat of aluminium paint incluing painting black and white strip or as ordered by Engineer-in-Charge on poles up to 1.5 mtr high above coping level and numbering with writing letters or figures(Block), height not exc 30 cm high & letters or figures not exc 10 Nos complete all as directed.

M&L for preparation of surfaces of pole for painting of PCC pole, vertical with one coat of cement base paint incluing painting black and white strip or as ordered by engineer-in-charge on poles up to 1.5 mtr high above coping level and numbering with writing letters or figures(Block), height not exc 30 cm high & letters or figures n'exc 10 Nos complete all as directed.

S&F GI bracket for street light fittings 32mm dia 1.2Mtr length including D/C clamps for PCC/Steel pole round or square nut bolt and washers etc and painiting of bracket and clamps complete all as directed.

S&F Thermoplastic IP 66/67, weather proof, corrosion free, halogen and silicon free, UV resistence, insulated and shock proof, High impact strength, flame retardant and self extinguishing, Glow wires test conducted at 960 Deg junction box suitable for terminating cable for 6Sqmm/10 Sqmm/16 Sqmm including necessary cable gland and check nut Size of M32 (incoming and out going cbles) and mounting bracket clamp suitable size as per site with nut bolt washer complete all as specified and directed. Make:- Hensel Cat Part No. KF1010B and Cable Gland Cat Part No. 1555.32.25)

S&F PVC Conduit pipe from PVC Junction Box to street light bracket for protection of cable fixing clamp on PCC/wall drilled the hole and insert a PVC gitti and screwed suitable size butt bolt complete all as specified and directed.

S&F PVC 3 Core copper cable 1.5Sqmm insulated for fixing of junction box to street light fittings complete all as specified and directed.

S&F outdoor type automatic timer for street light control single phase 230 volt maximum load 12 KW 25 Amp rating with hinged LID complete all as specified and directed. Make:- Havells cat No IHXTS0912A or equivalent in Indoasian/Swadeep.

S&F LED security light fittings aesthetically designed roadway luminaire with excellent thermal management complete 18Watt IP 66 including taking down old one complete all as specified and directed. Make:- Bajaj Cat Part No. ENXT P 18L WH SY PC SD or equivalent in Wipro/Philips.

S&F LED flood light of capacity 120Watt fittings made up of pressure die cast aluminium housing with toughned glass and high power LED secondary lenses with IP 66 protection, option 3000K 10KV SPD, including taking down old one complete all as specified and directed. Make :- Bajaj Cat part No BJFL 120 W LED I WW or equivalent in Wipro/Philips.

Supply, lay and testing ductile Iron pipe of size 100 mm dia, class K-7 ISI marked as per IS 8329-2000 and jointing with flexible rubber gaskets push on type joints with centrifugally lined with cement mortar in trenches including taking down old unserviceable CI pipe & fittings and burning out joints complete all as specified and directed. make Electro steel/Jindal/Lanco

M&L for mechanical joints with rubber rings at both ends along with bolts nuts of 100 mm Bends complete all as specified and directed.

S&F float valves complete brass fitting with rod and plastic ball of 20 mm dia sizes complete all as specified and directed.

S&F float valves complete brass fitting with rod and plastic ball of 25 mm dia sizes complete all as specified and directed.

Taking down old u/s existing sluice valves and supply and fix new cast iron sluice valve PN 1.0 of size 150mm, IS marked, these valves are fixing sandwich type fitting requirement including necessary MJ collar flange joints for fxing of new valves complete all as specified and directed.

Taking down old u/s existing sluice valves and supply and fix new cast iron sluice valve PN 1.0 of size 100mm, IS marked, these valves are fixing sandwich type fitting requirement including necessary MJ collar flange joints for fxing of new valves complete all as specified and directed.

Taking down old u/s existing non return valve and supply and fix new cast iron NRV valve PN 1.0 of size 150mm, IS marked these valves are fixing sandwich type fitting requirement including necessary MJ collar flange joints for fxing of new valves complete all as specified and directed.

M&L for 4 inch MS GI pipe delivery line from diesel engine pump to outside the bldg, one side welded to GI flange and including 90 degree bend one piece and alo silencer pipe extension from engine to outside bldg complete all as specified and directed.

M&L for making grill 2 nos for DAD Complex rain water sump from both side 1inch x1inch grill for protection of waste polythene entering inside the sump, removable type door and cleaning and fixing through gate system at both side gutter complete all as specified and directed.

S&F in repair gun metal gate valve of size 20mm dia with inner wheel head, screwed both ends in iron pipe and fixed complete all as specified and directed.

S&F in repair gun metal gate valve of size 40mm dia with inner wheel head, screwed both ends in iron pipe and fixed complete all as specified and directed.

S&F in repair gun metal gate valve of size 50mm dia with inner wheel head, screwed both ends in iron pipe and fixed complete all as specified and directed.

M&L for point wiring in conduit concealed type with PVC insulated, unsheathed, single core multistranded copper conductor cable (FRLS) of size 1.5 Sqmm, 1100 volts grade including 1.5 Sqmm PVC insulated, unsheathed, copper conductor cable for earth continuity wire to be drawn through PVC conduit ISI marked fixed with all fittings and accessories and fixed in sunken boxes and frame cover plate for mounting of modular switches/sockets/regulators etc as required at site for one light /CB/fan point controlled by one type switch all as specified and directed. (Note :- MS Sunken boxes, cover plates with frame switches, sockets shall be measured and paid seperately in an appropriate Item of Sch 'A' and laying/fixing of sunken box and cover with frame is included in quoted rate.

All as per item No. 64 here-in-before but for one 3 pin 5A socket outlet on independent board complete all as specified and directed.

All as per item No. 64 here-in-before but for one 3 pin 5 Amps socket point on the same board with other switches complete all as specified and directed.

All as per item No.64 here-in-before but with 2.5 Sqmm cable for one 6 pin 15A socket outlet point on independent board.

S&F switch Modular type 5A one way complete all as specified and directed.

S&F one way switch 16A one Module complete all as specified and directed.

S&Fsocket outlet 2 in 1, 3 pin, 5 Amps Modualr type complete all as specified and directed.

S&F socket outlet 6/16Amps modular type complete all as specified and directed.

S&F in repair fan regulator electronic socket step modular type complete all as specified and directed.

Supply only MS sunken box and PVC cover plate with frame suitable for accommodating 02 Nos modular switch/socket etc complete all as directed.

Supply only MS sunken box and PVC cover plate with frame suitable for accommodating 03 Nos modular switch/socket etc complete all as directed.

Supply only MS sunken box and PVC cover plate with frame suitable for accommodating 04 Nos modular switch/socket etc complete all as directed.

Supply only MS sunken box and PVC cover plate with frame suitable for accommodating 08 Nos modular switch/socket etc complete all as directed.

Material and labour for sub main wiring concealed type with Four runs of single core, PVC insulated unsheathed multi-stranded copper conductor cable of size 10 Sqmm, 1100 volts grade (FRLS) and one run of 10 Sqmm PVC insulated multi-stranded copper conductor cable (FRLS) for earth continuity conductor drawn through and including suitable size ISI marked rigid fire retardant PVC conduit with all necessary accessories such as bends, tees, junction boxes, elbows etc including cutting chasing existing surface to conceal the conduit and making good to the disturbed surface to match with existing surface including taking down old unserviceable one complete all as specified and directed. Note : Four runs of 10 Sqmm cable, one run of 10 Sqmm continuity earth wire and one run of PVC non metalic conduit with all necessary accessories will be measured as one length.

Material and labour for sub main wiring concealed type with Two runs of single core, PVC insulated unsheathed multi-stranded copper conductor cable of size 10 Sqmm, 1100 volts grade (FRLS) and one run of 10 Sqmm PVC insulated multi-stranded copper conductor cable (FRLS) for earth continuity conductor drawn through and including suitable size ISI marked rigid fire retardant PVC conduit with all necessary accessories such as bends, tees, junction boxes, elbows etc including cutting chasing existing surface to conceal the conduit and making good to the disturbed surface to match with existing surface including taking down old unserviceable one complete all as specified and directed. Note:- Two runs of 10 Sqmm cable, one run of 10 Sqmm continuity earth wire and one run of PVC non metalic conduit with all necessary accessories will be measured as one length.

Material and labour for sub main wiring concealed type with Two runs of single core, PVC insulated unsheathed multi-stranded copper conductor cable of size 6 Sqmm, 1100 volts grade (FRLS) and one run of 6 Sqmm PVC insulated multi-stranded copper conductor cable (FRLS) for earth continuity conductor drawn through and including suitable size ISI marked rigid fire retardant PVC conduit with all necessary accessories such as bends, tees, junction boxes, elbows etc including cutting chasing existing surface to conceal the conduit and making good to the disturbed surface to match with existing surface including taking down old unserviceable one complete all as specified and directed. Note : Two runs of 6 Sqmm cable, one run of 6 Sqmm continuity earth wire and one run of PVC non metalic conduit with all necessary accessories will be measured as one length.

S&F in repair TPN DBs-ETPN DBs with provision for FP MCB/Isolator as incomer and SP MCB as outgoing IP 43 IK 09 with metal door 4 way complete all as specified and directed. Make: Legrand Cat Part No. 5077 15 or equivalent in Havells/L&T

S&F in repair MCB FP 415 Volt 63Amp capacity complete all as specified and directed. Make:- Legrand Cat No 4086 94 or equivalent in Havells/L&T

S&F sheet metal enclosure single pole and neutral, 240 volts, 12 way double door with 200 Amps rated bus bar including taking down old unserviceable one complete all as specified and directed. Make:- Legrand Cat Part No 5076 12 or equivalent in Havells/L&T

S&F sheet metal enclosure single pole and neutral, 240 volts, 8 way double door with 200 Amps rated bus bar including taking down old unserviceable one complete all as specified and directed. Make:- Legrand Cat Part No 5076 11 or equivalent in Havells/L&T

S&F in repair MCB single pole and neutral 32 Amps, 240 Volts complete all as specified and directed. Make:- Legrand Cat Part No 4086 17 or equivalent in Havells/L&T

S&F in repair MCB single pole, 240 volts 6 to 32 Amps 240 Volts complete all as specified and directed. Make:- Legrand Cat Part No 4085 87 to 4085 95 or equivalent in Havells/L&T

S&F in repair LED Surface mounting 2x2 fittings 36 Watt full fit luminarie with glare free uniform illumination with longer life and less maintainance complete all as specified and directed. Make:- Bajaj cat part No BZSSQL 36W LED WH i or equivalent in Wipro/Philips.

S&F in repair LED recess mounting 2x2 fittings 36 Watt full fit luminarie with glare free uniform illumination with longer life and less maintainance complete all as specified and directed. Make:- Bajaj cat part No BZRSQL 36W Gzi WH or equivalent in Wipro/Philips.

S&F LED surface mounted 1'x4' panel light 36 Watt with high performance integrated electronic driver of operating voltage 110 to 265 Volts complete with all accessories and including connecting up with twin core twisted flexible copper conductor cable of 24/0.2mm size and taking down old unserviceable tube light fitting complete all as specified and as directed. Make:- Bajaj Cat No. BZSSLL 36W LED WH i or equivalent of Wipro/Philips.

S&F wall mounting fan complete with electronic type regulator and accessories 230 V, 400mm sweep, ISI standards, RPM1200, 340 Air Delivery 200CMM, down rod length 267mm, rust - free powder coated finish and pre-wired and including connecting up with twin core twisted flexible copper conductor cable with connector including dismatling old one deposit to AGE E/M Store yard complete all as specified and as directed. Make:- Bajaj ESTEEM WALL FAN Product code 250542 or equivalent in Havells/CG.

S&F metal body sound proof Exhuast fan 300 mm size with single phase 230 Volt 900 RPM with louvers complete making a hole in wall or existing window grill cutting and 12mm plywood suitable size of exhaust fan make hole and fixing the window nut bolt washers and after finishing work disturbed surface of wall including dismatling old one deposit to AGE E/M Store yard complete all as specified and as directed. Make:- Bajaj Product code 70079 or equivalent in Havells/CG.

S&F in repair LED security light fittings aesthetically designed roadway luminaire with excellent thermal management complete 45Watt IP 66 including GI bracket nut bolt and washer grouting in wall complete all as specified and directed. Make :- Bajaj cat part No BRTFG45W V2 or equivalent in Wipro/Philips.

S&F in repair LED flood light COB- based die cast alumiium housing with toughened cover IP 65 protected 30Watt making connection complete all as specified and directed. Make :- Bajaj cat part No-BJFL 30W LED I or equivalent in Wipro/Philips.

S&F in repair LED 40 Watt post top lantern decorative, robust and reliable with transparent diffuser complete with all accessories and including connecting up with twin core twisted flexible copper conductor cable of suitable size and taking down old unserviceable post top light fitting complete all as specified and as directed. Make:- Bajaj cat part No BGCL 40W LED WH or equivalent in Wipro/Philips.

S&F in repair LED 25 Watt post top lantern for garden decorative, robust and reliable with transparent diffuser complete with all accessories and including connecting up with twin core twisted flexible copper conductor cable of suitable size and taking down old unserviceable post top light fitting complete all as specified and as directed. Make:- Bajaj cat part No BGCTN 25 W LED WW or equivalent in Wipro/Philips.

Varsha Enterprises

RRK PROJECTS

GS TRADERS