Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹1.0 Cr
EMD Value
₹2.0 L
Closing Date
27 Nov 2026, 11:00 am5d left
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Executive Engineer
Electrical Division PWD B and R Br SCO NO 35 2nd Floor Chandigarh
Construction of Auditorium (Capacity 495 seats) at School of Eminence Nangal (Distt) Rupnagar (Electrical Low Voltage Services)
2026_CEPW_178814_1
Tender Notice No 44
Open Tender
Electrical Works
Percentage
Sector 17E Chandigarh
Please refer Tender documents.
2 documents required · 2 mandatory
₹10,000
Yes
₹2.0 L
Yes
13 Nov 2026
13 Nov 2026
27 Nov 2026
13 Nov 2026
27 Nov 2026
13 Nov 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Provision for Audio and Video Systems Supply, Installation, testing and commissioning of Speaker shall be a Professional passive full-range two-way loudspeaker comprising one 12-inch low-frequency woofer and one high-frequency compression driver, designed for fixed installation sound reinforcement applications. The loudspeaker shall have a frequency response of 60Hz to 18kHz (-3dB) and a frequency range extending from 50Hz to 20kHz (-10dB) or better. The system shall provide a nominal coverage pattern of 100° horizontal × 60° vertical through a constant-directivity waveguide. The loudspeaker shall deliver a sensitivity of 97dB (1W/1m) or better and a maximum peak sound pressure level of 130dB SPL or higher. The system shall have a nominal impedance of 8 ohms and a continuous power handling capacity of 600W RMS or higher with peak power handling of 2400W or higher. The loudspeaker shall incorporate a passive crossover network with integrated high-frequency protection. The enclosure shall be constructed from weather-resistant plywood or equivalent high-strength composite material and shall include a powder-coated corrosion-resistant metal grille. The loudspeaker shall be suitable for indoor and outdoor installations with a minimum IP44 rating. The unit shall support multiple suspension and mounting options for permanent installation application. Complete in all respect as desired by the engineer in charge at site. | 2 | Each | 2,43,279 | ₹4,86,558 |
| 2 | Supply, Installation, testing and commissioning of OEM frames/ Hanging/ Mounting arrangement for Suspension of offered above, Shall offer multiple rigging points for achieving desired pitch settings. complete in all respect as desired by the engineer in charge at site. | 2 | Each | 17,163 | ₹34,326 |
| 3 | Supply, Installation, testing and commissioning of Professional passive low-frequency subwoofer loudspeaker comprising one 18-inch high-excursion low-frequency transducer, designed for fixed installation and sound reinforcement applications. The subwoofer shall have a frequency response of 45Hz to 250Hz (-3dB) and a usable frequency range extending from 35Hz to 300Hz (-10dB) or better. The system shall provide a sensitivity of 97dB (1W/1m) or higher and be capable of delivering a maximum peak sound pressure level of 130dB SPL or greater. The loudspeaker shall have a nominal impedance of 8 ohms and a continuous power handling capacity of 600W RMS or higher, with peak power handling of 2400W or greater. The enclosure shall be constructed from weather-resistant plywood or equivalent high-strength composite material and incorporate a heavy-duty, corrosion-resistant metal grille. The loudspeaker shall be optimized for use with full-range installation loudspeakers and shall support suspended, wall-mounted, or ground-stacked installation configurations. complete in all respect as desired by the engineer in charge at site. | 2 | Each | 4,46,192 | ₹8,92,384 |
| 4 | Supply, Installation, testing and commissioning of Speaker shall be a Professional surface-mount two-way full-range loudspeaker comprising one 5.25-inch low-frequency woofer and one 1-inch high-frequency driver, designed for foreground/background music and speech reinforcement applications. The loudspeaker shall have a frequency response of 65Hz to 20kHz or better and shall provide a sensitivity of 88dB (1W/1m) or higher. The system shall be capable of delivering a maximum SPL of 105dB or higher and shall have a nominal impedance of 8 ohms. The loudspeaker shall incorporate an integrated 70V/100V transformer with multiple selectable power taps and low-impedance bypass operation. Coverage shall be 110° conical or wider to ensure uniform sound distribution. The loudspeaker shall support a minimum continuous power handling of 60W RMS and peak power handling of 240W or higher. The enclosure shall be constructed from UV-resistant engineered polymer with a corrosion-resistant powder-coated metal grille and shall be suitable for indoor and outdoor installations with a minimum IP55 weather-resistance rating. The loudspeaker shall include an adjustable wall-mount bracket and concealed cable management for professional installation applications. complete in all respect as desired by the engineer in charge at site. | 3 | Each | 38,448 | ₹1,15,344 |
| 5 | Supply, Installation, testing and commissioning of Speaker shall be a Professional surface-mount two-way full-range loudspeaker comprising one 8-inch high-excursion low-frequency woofer and one high-frequency compression driver or dome tweeter, designed for foreground/background music, speech reinforcement, and distributed audio applications. The loudspeaker shall have a frequency response of 80Hz to 20kHz or better and shall provide a sensitivity of 90dB (1W/1m) or higher. The system shall be capable of delivering a maximum SPL of 120dB or higher and shall have a nominal impedance of 8 ohms. The loudspeaker shall incorporate an integrated 70V/100V transformer with multiple selectable power taps and low-impedance bypass operation. Coverage shall be 90° horizontal × 90° vertical or wider to ensure uniform sound distribution. The loudspeaker shall support a minimum continuous power handling of 200W RMS and peak power handling of 800W or higher. The enclosure shall be constructed from UV-resistant engineered polymer or equivalent weather-resistant material with a corrosion-resistant powder-coated metal grille and shall be suitable for indoor and outdoor installations with a minimum IP54 rating. The loudspeaker shall include an adjustable mounting bracket and concealed cable management for professional installation applications. complete in all respect as desired by the engineer in charge at site. | 2 | Each | 90,282 | ₹1,80,564 |
| 6 | Supply, Installation, testing and commissioning of Professional Class-D multi-channel network power amplifier with integrated DSP and network audio capability, designed for installed sound reinforcement and distributed audio applications. The amplifier shall provide four independent output channels with a total power output of 1200W or higher, supporting flexible power allocation across channels. The amplifier shall support low-impedance (2Ω, 4Ω, 8Ω). The unit shall have a frequency response of 20Hz to 20kHz (±1dB) or better, a signal-to-noise ratio of 100dB or higher. The amplifier shall incorporate onboard DSP with configurable parametric equalization, crossover filters, delay, loudspeaker protection, limiting, signal routing, and preset management. The amplifier shall include comprehensive protection features such as thermal protection, overload protection, short-circuit protection, DC protection, and load monitoring. The unit shall be rack-mountable, suitable for continuous operation in professional installations, and operate from a universal 100–240V AC power supply. complete in all respect as desired by the engineer in charge at site. | 2 | Each | 2,58,605 | ₹5,17,210 |
| 7 | Supply, Installation, testing and commissioning of Professional Class-D multi-channel network power amplifier with integrated DSP and network audio capability, designed for installed sound reinforcement and distributed audio applications. The amplifier shall provide four independent output channels with a total power output of 4800W or higher, supporting flexible power allocation across channels. The amplifier shall support low-impedance (2Ω, 4Ω, 8Ω). The unit shall have a frequency response of 20Hz to 20kHz (±1dB) or better, a signal-to-noise ratio of 100dB or higher, and total harmonic distortion of less than 0.1%. The amplifier shall incorporate onboard DSP with configurable parametric equalization, crossover filters, delay, loudspeaker protection, limiting, signal routing, and preset management. The amplifier shall include comprehensive protection features such as thermal protection, overload protection, short-circuit protection, DC protection, and load monitoring. The unit shall be rack-mountable, suitable for continuous operation in professional installations, and operate from a universal 100–240V AC power supply. complete in all respect as desired by the engineer in charge at site. | 1 | Each | 3,67,264 | ₹3,67,264 |
| 8 | Supply, Installation, testing and commissioning of Professional full-range surface-mount loudspeaker designed for indoor and outdoor background music, paging, and voice alarm applications. The loudspeaker shall incorporate multiple full-range drivers in a compact enclosure and provide a frequency response of 80Hz to 20kHz or better. The system shall have a sensitivity of 85dB (1W/1m) or higher and be capable of delivering a maximum sound pressure level of 100dB SPL or greater. The loudspeaker shall be comprised of a min 2.25 inch driver or better have a nominal impedance of 8 ohms and include an integral 70V/100V 6/8/16 watt or others line transformer with multiple selectable power taps and low-impedance bypass operation. Coverage shall be 100° × 100° or wider to ensure uniform sound distribution across the listening area. With a minimum IP44 environmental protection rating. The system shall support wall-mount installation. complete in all respect as desired by the engineer in charge at site. | 2 | Each | 16,221 | ₹32,442 |
| 9 | Supply, Installation, testing and commissioning of Professional integrated mixer amplifier designed for background music, paging, and distributed audio applications. The amplifier shall deliver a minimum 100W output power for 70V/100V constant-voltage loudspeaker systems and support multiple loudspeaker connections for wide-area coverage. The unit shall provide a frequency response of 70Hz to 18kHz or better and total harmonic distortion of 0.5% or less. It shall feature integrated DSP processing with equalization, loudspeaker presets, dynamic processing, speech optimization, feedback suppression, and system protection functions. The amplifier shall support a minimum of 4 audio input channels, including balanced microphone/line inputs and stereo line inputs, along with Bluetooth audio streaming capability. The unit shall provide front-panel control and display for system configuration. The amplifier shall incorporate fanless convection cooling for silent operation and include priority paging functionality with selectable input priorities. The unit shall operate from a universal 100–240V AC power supply. complete in all respect as desired by the engineer in charge at site. | 1 | Each | 47,560 | ₹47,560 |
| 10 | Supply, Installation, testing and commissioning of Professional networked digital signal processor (DSP) and audio matrix platform designed for conferencing, public address, background music, and integrated AV applications. The DSP shall feature a high-performance 32-bit fixed/floating-point processing architecture with advanced audio signal processing and routing capabilities. The unit shall provide a minimum of 8 balanced analog audio inputs and 8 balanced analog audio outputs, individually configurable for microphone or line-level operation. The DSP shall provide configurable signal processing functions including automatic mixing, matrix mixing, equalization, filtering, dynamics processing, feedback suppression, delay, crossover functions, room combining, signal routing, logic control, and loudspeaker management. The system shall support USB audio interfacing, GPIO integration, remote control interfaces, and centralized configuration, monitoring, and diagnostics through dedicated software. The processor shall provide a frequency response of 20Hz to 20kHz, dynamic range of 110dB or greater, THD+N of 0.01% or less, and channel separation better than 100dB. The unit shall support management of networked audio devices and integration with third-party AV control systems. The processor shall be rack-mountable and operate from a universal 100–240V AC power supply. complete in all respect as desired by the engineer in charge at site. | 1 | Each | 2,57,823 | ₹2,57,823 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.41 MB
SBD10046905.pdf
Tender Documents • 30.12 MB
BOQ_365505.xls
BOQ • 0.45 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .