Refurbishing Works at Old ADB Building and Old MCSRDC Building for Accommodating IMRH Design Team at RWRDC Division HAL DC Including Electrical Works

Name of the Individual / Firm / Company: * Mandatory

Type of ownership

Year of Estblishment of Company/Business

If Other, please specify

Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, etc.,

Address for correspondence:

TIN number

PAN no and Name of Holder

PF number (If any)

ESI number

Service Tax Registration No

Goods and Service Tax ID No.

SAC Code

Contact details

Registered Contractor

Pls Enter

Need to Fill Column 19

Maximum value of works excuted during the followinf 5 years. . (In Lakhs)

Pls enter Finiancial Turnover in Rupees for all the years

DETAIL OF WORK ON HAND UPTO N-Months (N-contract period) [For Bid capacity calculation] NOTE : PROVISION for 10 works are given. If more, a separate similar sheet to be made showing all the works with all details as per this FORMAT and same to Uploaded. However, 9 works details to be provided and balance work value of other works to be added and to be provided in 10th row as OTHER works.

Name of Organization with address

Balance Work On Hand

Work Schedule for completion of works with in stipulated time [Please enclose action plan / bar chart as to indicate the completion of work, within the scheduled time (contract period)]

Quantity of work Excuted during the last three years

Bank(s) details: [Copy of the cheque leaf to be uploaded]

Bank Account No.

Bank Statement for past three month

Latest Over draft Facilties with Bank enter Name of Bank, Date of Issue and Value of Over Draft

Latest Bankers Solvency Certificate from Nationalized/ scheduled Bank issued NOT before 12 months from the date of Tender Notice.

#VALUE!

Experience of having successfully completed similar works during last 7 years ending last day of previous month. [Work experience certificates / Completion certificates should be uploaded for verification]. [Latest work experience certificate may be uploaded] (i) THREE similar completed works each costing not less than the amount equal to 40% of the estimated cost. (ii) TWO similar completed works each costing not less than the amount equal to 50% of the estimated cost. (iii) ONE similar completed work each costing not less than the amount equal to 80% of the estimated cost. [Amount put to the Tender]

You are Not Eligible

Type of Work [ Incase of private works the same shall be supported with TDS certificate]

Type of Work [ Incase of private works the same shall be supported with TDS certificate]

work done

Type of Work and Organisation name [ Incase of private works the same shall be supported with TDS certificate]

#VALUE!

Related Document to be Uploaded to eProcurement Portal

DEAILS OF TECHNICAL PERSONNEL AVAILABLE( if space provided is insufficant separate sheet to be uploaded with the same format as below)

Name of members or technical personllel avalable in the organization

DETAILS OF MACHINERY AVAILABLE

Name of Mechinery

Concrete Mixers - Type etc

Vibrators - Diesel - Electrical

Weiding equipment's

a) Rectifiers

b) Welding Generators

Erection equipment's

Cranes-

Hoists-

Lifts-

Water Lifting motor pumps

a) Diesel

b) electric

Drilling Equipment's

Compressors

Trucks

Stone crushers

Bitumen hot mixture plant

Bitume boiler

Rollers

Batching plants

Vibratory rollers

Generators

Cranes-Details

Concrete pumps

Road Pavers

Rock breakers

Transit mixers

Excavators

Weight batches

Others

Details of person holding the power of Attorney (If different from contact person)

Related Document to be Uploaded to eProcurement Portal

DECLARATION

Pls enter

Tender Document Cost and EMD details

Enclosed / Not enclosed

Enclosed

Enclosed

Average annual financial turn over during the last 3 years, ending 31st March 2024 [ should not be less than 30% of amount put to tender] and details for last 5 years to be provided to assess the bid capacity. The values provided to be supported by uploading Balance Sheet along with Profit & loss account statement. . (In Lakhs)

Specification

Providing and laying in position ready mixed or site batched M25 Grade with minimum cement content of 330 kg/m3 design mix cement concrete for Reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland / Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, consolidation, levelling, curing, scaffolding, all materials, labour, carriage for all leads & lifts; but excluding the cost of shuttering and reinforcement, etc., all complete as per direction of the Engineer-in-Charge. Note: (i) Site design mix to be obtained from Govt. / NABL laboratory for site batching concrete. (ii) Small quantity is as approved by EIC in volumetric proportion. All works above plinth level upto floor V level including necessary openings and packing if any for laying pipes, cables, etc.,

Formwork (Centering and shuttering including strutting, propping etc, and removal of form) for the following RCC members which are defined as below, in fair finished by providing timber, wooden planks, runners / M.S. sheets with all supports, struts, braces, wedges, scaffolds, bracings, ladders, gangways, dressing with oil including M.S. bolts nuts and washers, temporary openings, filleting for a stop, chamfered edges, internal / external splayed, rounded angles or grooves for forming throating including making temporary openings in the forms for pouring concrete etc., all complete as directed by the Engineer-in-Charge for Plinth beams, Lintels beams, room beams, beams,girders, bressumers and cantilevers, etc., Note: Formwork material is contractor's own property and shall be removed after completion of work.

Supplying, straightening, fabricating (cutting & bending), placing in position and binding steel reinforcement of TMT bars of not less than Fe 500 D conforming to IS 1786 for all concrete reinforcment members / works above/below plinth level, including cutting to length, bending to shape required, including cranking, bending spirally for hooping for column, hooking ends and binding with mild steel wire (Annealed) not less than 0.9 mm dia or securing with clips, including fixing and bracing, wastage, welding, supporting or otherwise holding firmly in position so that the placing and ramming of concrete will not displace it etc., complete all as per specifications, drawings and as directed by the Engineer-in-Charge. Note: a) Only authorized laps, chairs etc. shall be considered for measurement. b) The exposed Reinforcement bars shall be coated with cement slurry.

Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt of Wedge expansion type, etc., complete as per direction of Engineer-in-Charge.

Fastener with threaded dia 6mm each

Fastener with threaded dia 10mm each

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes, including hoisting and setting in position with cement mortar 1:6 (1 cement : 6 coarse sand) and along with necessary finishing, making or leaving holes & chases and making good, etc., all complete as directed by the Engineer-in-Charge.

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes, including hoisting and setting in position with cement mortar 1:4 (1 cement : 4 coarse sand) and along with necessary finishing, making or leaving holes & chases and making good, etc., all complete as directed by the Engineer-in-Charge.

Providing, fabricating and fixing 35mm thick flush door shutters conforming to IS :2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood & lipping with 2nd class teak wood battens 25mm minimum depth on all edges and well matched commercial 3ply veneering with vertical grains or cross bands including ISI marked butt hinges with necessary screws and face veneers on both faces of shutters and provision of rebates, suitable blocks for taking mortice locks, latches or other fittings, fitting to frames / chowkats, etc., all complete as directed by the Engineer-in-Charge.

Supplying, fabricating and fixing second class teak wooden plain, solid, straight chowkats and frames of doors, windows and other frames, wrought framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints and fixed to wall or in position with hold fast lugs or with dash fasteners of required dia & length, etc., all complete as directed by the Engineer-in-Charge. Note: The timber in contact with masonry shall be treated with anti-termite paint.

Providing, fabricating and fixing 30mm thick flush door shutters conforming to IS :2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood & lipping with 2nd class teak wood battens 25mm minimum depth on all edges and well matched teak 3ply veneering with vertical grains or cross bands including ISI marked Stainless Steel butt hinges with necessary screws and face veneers on both faces of shutters and provision of rebates, suitable blocks for taking mortice locks, latches or other fittings, fitting to frames / chowkats, etc., all complete as directed by the Engineer-in-Charge.

Providing [40 x 5]mm flat iron hold fast 40cm long including fixing to frame with 10mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block [30 x 10 x 15]cm / brickwork 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size), etc., all complete as directed by the Engineer-in-Charge.

Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc, all complete as directed by the Engineer-in-Charge.

Providing and fixing bright finished brass 100mm mortice latch and lock of 6 levers, vertical type, and a pair of lever brass handles of approved quality, polished bright of approved manufacture to door with all necessary screws, bolts, nuts and washers of approved manufacture, etc., all complete as directed by Engineer-in-Charge.

Supplying and fixing the Polished (bright finished) brass barrel type tower bolts 250mm long X 10mm with barrel of extruded sections of brass, of approved make and rolled or drawn brass bolt, design to door with all required screws, bolts, nuts, washers, etc., conforming to IS 204 (Part 2), etc., all complete as directed by the Engineer-in-Charge.

Providing and fixing aluminium sliding door bolts (aldrop) of [250 x 16]mm, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws, etc, all complete as directed by the Engineer-in-Charge.

Providing and fixing bright finished brass butt hinges [125 x 70 x 4]mm with necessary screws, etc., all complete as directed by Engineer-in-Charge.

Providing and fixing Polished (bright finished) extruded brass handles fabricated type 125mm long with screws, conforming to IS 208 and with continuous plate to door with all necessary screws, bolts, nuts, etc., all complete as directed by Engineer-in-Charge.

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35Kgs and door width upto 700mm), with necessary accessories and screws, etc., complete as directed by Engineer-in-Charge.

Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section [90 x 45]mm having single rebate of [32 x 15]mm to receive shutter of 30mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame, etc., all complete as directed by the Engineer-in-Charge.

Providing and fixing to existing door frames 30mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5mm thick FRP laminate for panels, including provision of internal wood lipping, rebates, suitable blocks for taking mortice locks, latches or other fittings, fitting to frames / chowkats, etc., conforming to IS: 14856, etc., all complete as directed by the Engineer-in-Charge.

Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body), with double speed adjustment with necessary accessories and screws, etc., all complete as directed by Engineer-in-Charge.

Providing and laying Double charged Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in approximate thickness of 6mm including, pointing and grouting the joints with white cement and matching pigment and also including preparation of the existing surface along with removal of existing PVC Sheet, etc., all complete as per direction of Engineer-in-Charge.

Providing and laying Glazed vitrified tiles Matt / Anti skid polished finish size in floors as indicated below for Paper Joint of tile size of [600 X 600]mm / as per site required size (Thickness to be specified by the manufacturer) with water absorption less than 0.08% and confirming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 ( 1 cement: 4 course sand), including grouting the joints with grey cement slurry @ 3.3 Kg/Sq m including machine cutting, grouting the joints with white cement and matching pigments, etc., all, complete as directed by he Engineer-in-Charge. Note : Quoted rate shall be inclusive of screed, pointing etc.

Providing and laying Tiles in Dadoo for walls / wall clad with Vitrified Tiles over a screed of cement mortar (1:3) -Size of Tile ]600 x 600]mm or nearest size available (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/Sq m including grouting the joint with white cement & matching pigments, etc., all, complete as directed by he Engineer-im-Charge.

Providing and laying Double Charged Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6mm thickness, including grouting of joints, etc., all complete as per direction of Engineer-in-Charge.

Providing and fixing mineral fibre false ceiling tiles With 16mm thick beveled tegular mineral fibre false ceiling tile at all heights of size [595 x 595]mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflectance ? 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7) in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.33mm thick (galvanized @ 120 gsm) comprising of main T runners of [15 x 32]mm of length 3000mm, cross T of size [15 x 32]mm of length 1200mm and secondary intermediate cross T of size [15 x 32]mm of length 600mm to form grid module of size [600 x 600]mm suspended from ceiling using galvanized mild steel item (galvanised@80gsm) 50mm long 8mm outer diameter M-6 dash fasteners, 6mm diameter fully threaded hanger rod up to 1000mm length and L-shape level adjuster of size [85 x 25 x 2]mm, spaced at 1200mm centre to centre along main ‘T’. The system should rest on periphery walls / partitions with the help of GI perimeter wall angle of size [24 x 24 X 3000]mm made of 0.40mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450mm centre to centre & 40mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the Engineer-in-Charge.

Providing and applying internal wall and ceiling painting with two coats of premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound) content less than 50grams / litre after applying white cement based putty of approximate thickness 1mm over the plastered wall surface including preparation of the surfaces by scvraping / racking out, etc., with a coat of low VOC primer with emery paper to bring to smooth and even including applying additional coats wherever required to achieve even shade and colour of approved brand and filling up the cracks, etc., all complete as per direction of Engineer-in-Charge.

Painting Wooden surfaces of any description with two coats of synthetic enamel paint conforming to IS 2932, of approved colour and manufacture over a coat of primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content, with ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams / litre including preparation of surface by rubbing with fine grade of abrasive paper to ensure smooth and even surface, applying knifing paste filler putty before painting the first coat etc., all complete as directed by the Engineer-in-Charge.

Providing, applying and laying cement mortar (1:6) plastering 15mm thick on brick / solid blocks / concrete surfaces, finished even and smooth with trowel for Internal / External walls, etc., including supply and fixing of hexagonal chicken mesh minimum 150mm wide having opening [20 x 20]mm of 26 gauge at juncitons of concrete & brick work or between different material, including making grooves as per the requirement not exceeding 10mm width and not exceeding 10mm deep and removing the existing surface with necesary materials, labour, scaffolding, curing, tools and tackles, etc., at all heights, etc., all complete as directed by the Engineer-in-Charge.

French Polishing on wood work on New / old work with two or more coats including a coat of wood filler, etc., all complete as directed by the Engineer-in-Charge.

Disconnecting the overhaed / terrace PVC water storage tanks of any size from water supply line and removing from terrace including shifting to ground level and handing over to the plant maintainance, etc., all complete as directed by the Engineer-in-Charge.

Dismantling 15 to 40mm dia G.I Pipe internal / exposed work including stacking of dismantled pipes, etc., all complete as directed by the Engineer-in-Charge. [Rate is including providing temporary dummies, steppers, etc.,].

Taking out existing wooden door shutter, repair by cutting, painting, etc., and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc., as required, etc., all complete as per the direction of the Engineer-in-Charge.

Dismantling aluminium / Wooden / Gypsum partitions, doors, windows, fixed glazing, cupboard shutters, fixed furniture, ventilators and false ceiling including frames, supporting members, glazing and all other accessories, etc., along with disposal of unserviceable material and stacking of serviceable material with in 50 meters lead, etc., all complete as directed by the Engineer-in-Charge.

Making the opening in brick masonry for door / window / clerestory window, including dismantling in floor or walls by cutting masonry and making good the damages to walls, flooring and jambs complete, to match existing surface including disposal of mulba / rubbish to the nearest dumping ground / outside HAL Premises / contractors own yard, etc., all complete as per direction of Engineer-in-Charge.

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechnical means, including loading, transporting, unloading outside HAL Premises / Contractors own yard or as approved by Engineer-in-Charge, beyond 50m initial lead, for all leads including all lifts involved, etc., all complete as directed by the Engineer-in-Charge.

Demolition / Dismantling of existing brick / block masonry work, built in cement mortar manually / by mechanical means of any description at any height and position with requried scaffolding, etc., including stacking of serviceable material and disposal of demolished / unserviceable material (Except saleable materials) outside HAL for a lead upto 10.00 kms for all lifts, etc., all complete as directed by the Engineer-in-Charge.

Dismantling tile work (all types) / Mosaic in floors, walls, skirting and roofs for thickness of tiles 10mm to 25mm laid in cement mortar including stacking material within 50 metres lead and disposal of unservicable material outside HAL premises, etc., all complete as directed by the Engineer-in-Charge.

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with W.C. pan with ISI marked white solid plastic seat and lid, 10 litre low level white P.V.C. flushing cistern, along with flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required, making it operational for use and also including dismantling of existing water closet of any type along with all its accessories, etc., all complete as directed by the Engineer-in-Charge.

Providing and fixing, testing and commissioning 8mm dia C.P. / S.S. Jet (health faucet) with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved with necessary fittings, etc., all complete as directed by the Engineer-in-Charge.

Providing and fixing of toilet paper holder of C.P brass type all complete as specified and directed by Engineer-in-Charge, inluding the dimantling of existing toilet paper holder, if any, etc., all complete as directed by the Engineer-in-Charge.

Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size [610 x 390 x 370]mm having pre & post flushing with water (250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets embedded in cement mortar (1:3), connecting the waste pipe to floor trap with all necessary fittings and accessories like 32mm dia semi-rigid PVC waste pipe (concealed in the wall) including PVC waste fittings, clamps, make it operational for use, etc., all as per manufacturers specification and also including dismantling of existing urinals, if any, , etc., all complete as directed by the Engineer-in-Charge.

Providing and fixing [600 x 450]mm beveled edge mirror of minimum 4mm thick superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers etc., including dimantling of existing mirrors, if any, etc., all complete as directed by the Engineer-in-Charge.

Providing and fixing White Vitreous China Wash basin of size [630 x 450]mm or nearest available size of approved make with a pair of 15mm C.P. brass pillar tap of approved model & make, C.I. brackets, 32mm C.P. brass waste fitting, 32mm dia semi-rigid PVC waste pipe, including painting of fittings and brackets, cutting and making good the walls, connecting to floor trap and with all necessary fittings and accessories making it operational for use, etc., wherever require and also including dismantling of existing wash basin, if any, etc., all complete as directed by the Engineer-in-Charge.

Providing and fixing PTMT towel ring trapezoidal shape 215mm long, 200mm wide with minimum distances of 37mm from wall face with concealed fittings arrangement of approved quality and colour, etc., all complete as directed by the Engineer-in-Charge.

Providing, fixing, testing and commissioning trap (floor trap) of approved make with 100mm inlet and 75mm outlet of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors , connection with PVC soil / waste pipe, necessary 150mm thick cement concrete (1:2:4) for embedding the trap, etc., all complete as directed by the Engineer-in-Charge.

Providing and fixing of ball valve (brass) 25mm nominal bore dia, of approved quality, High or low pressure, with plastic floats, screwed for iron pipe or brass ferrule and fixed, including necessary fittings i.e flynut, etc., all complete as directed by the Engineer-in-Charge.

Providing and placing in position at terrace (at all floor levels) polyethylene water storage tanks, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes, all accessories along with connecting it with the water line and make it operational, etc., all complete as directed by the Engineer-in-Charge.

Supplying, jointing, testing and commissioning, approved make GM body gate valves with C.I wheel and screwed ends, etc., all complete as directed by the Engineer-in-Charge.

Providing and fixing C.P. brass bib cock of 15mm nominal bore dia and approved quality conforming to IS:8931, etc., all complete as directed by the Engineer-in-Charge.

Providing and fixing Concealed Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, fixing the pipe with clamps at 1.00m spacing, necessary reducers, tank adaptors, etc., This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints and making good the walls, etc., complete as per direction of Engineer-in-Charge.

15mm dia

20mm dia

25mm dia

32mm dia

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes of 40mm dia, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints, etc., all complete as per direction of Engineer-in-Charge.

Providing, fabricating and fixing aluminium work for partitions, Curtain wall frames, flats, covers, Ventilators, Windows, louvers, doors, etc., frame work., (Min. thickness of powder coating 50 microns) made up of aluminium extruded sections, Ventilators: conforming to designaton 63400 of IS 1285 and of approved make, Sliding Window Frame: Top and side sections of the frame s to accomodate the shutter section. d) Bottom section of the frame shall be with gutter and partitions with extruded built up standard tubular sections / appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, e) Shutters are to be provided with glass of approved size for two shutters and stainless steel fly proof mesh for one shutter fixed with good quality tapered aluminium interlocking screwless snap on type glazing clip not less than 0.90mm thick. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, fgear, bushes, pivots, etc., all complete as per architectural drawings and the directions of Engineer-in-Charge. (Glazing, Panelling, fly proof mesh will be paid seperately).

Aluminium work for shutters of doors, windows i.e Powder coated aluminium windows (minimum thickness of powder coating 50 micron) & ventilators in moving position including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket and all other required accessories along with locking sytem and making it operational, etc., all complete as per the architectural drawings and the directions of Engineer-in-Charge .

Providing and fixing 12mm thick prelaminated particle board with decorative lamination on both sides flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, for Aluminium door, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws or AL.clips, etc., complete as per architectural drawings and directions of Engineer-in- Charge.

Providing and fixing glazing in aluminium / UPVC door, window, ventilator shutters and partitions, etc., With float glass panes of 5mm thickness (weight not less than 12.50 kg/Sq m) along with EPDM rubber / neoprene gasket, etc., all complete as per the architectural drawings and the directions of Engineer-in-Charge .

Supplying and Fixing of roller blinds consisting of control unit idler, head of rail, roller tube, bottom rail operating chain, brackets and clamps / nuts / bolts of approved colour / pattern along with necessary supporting hangar holders / screws and all other accessories, including removal of existing blinds and all accessories, etc., all complete as directed by the Engineer-in-Charge.

Providing and fixing (Jaguar make) C.P liquid soap holder with dispenser of available size and standard shape with bracket of the same materials with snap fittings of approved quality and colour, including cutting and making good the walls, etc., all complete as directed by the Engineer-in-Charge.

Supplying and Fixing of Curvilinear Urinal Partitions Plates / wall made out of 8mm thick glass with frosting and fixed to the walls with SS fittings of size 900 H and 450mm W at requisite levels as per the manufacturers instruction including necessary screws, fittings and fixures, etc., all complete as directed by the Engineer-in-Charge.

Supplying, laying, testing and commissioning the following dia PVC pipes of 6 kg/cm² SWR grade and of approved make with rubber ring joints conforming to IS 5382, jointed together with solvent, in trenches, walls and floors, including all necessary fittings & specials, bends, branches, sockets, pipe cutting and wastages, cutting and making good the floors, etc., all complete as directed by the Engineer-in-Charge.

75mm dia

110mm dia

Supply, fixing in flush with the false ceiling including suitable fixing arrangment using Chain links, testing & commissioning of recess mounting type square(2'X2') LED lighting fixture of wattage not exceeding 36watt made out of white powder coated CRCA housing/ aluminium housing, front frame with translucent /polycarbonate cover including control gear. The luminaire should have Lumen efficacy ≥100 lm/watt and lumen output not less than 3600lumens with PF >0.9 and Colour temperature shall be ≥5700K operating on single phase 230V voltage 50 Hz AC supply with voltage range 140-270V including necessary interconnections and other standard accessories complete in all respects and as directed by Engineer incharge. LM79 certification for luminaires & LM80 certificate for LED shall be produced.The LED Light fixture shall be of Crompton model no:LCTLRNE-36W-FO-CDL/Equivalent model in other approved makes luminaries which meets the above technical specification. LED used in the luminaire should be one of approved make as per approved make list of HAL.

Supply, fixing on ceiling including suitable fixing hardwares, testing & commissioning of surface mounting type square LED lighting fixture of wattage not exceeding 36watt made out of white powder coated CRCA housing/ aluminium housing, front frame with translucent /polycarbonate cover including control gear. The luminaire should have Lumen efficacy ≥100 lm/watt and lumen output not less than 3600lumens with PF >0.9 and Colour temperature shall be >5700K operating on single phase 230V voltage 50 Hz AC supply with voltage range 140-270V including necessary interconnections and other standard accessories complete in all respects and as directed by Engineer incharge. LM79 certification for luminaires & LM80 certificate for LED shall be produced.The LED Light fixture shall be of Crompton model no:LCTLSNE-36-FO-CDL/Equivalent model in other approved makes luminaries which meets the above technical specification. LED used in the luminaire should be one of approved make as per approved make list of HAL.

Supply and fixing on ceiling/in flush with the false ceiling as per site requirement testing & commissioning of round type Surface mounted LED downlighter with PDC aluminium housing and high translucent frosted plastic diffucer, wattage not less than 18W LED lighting fixture, lumens efficiency ≥ 100lm/w at luminaire level, effficent heat sink, Colour temprature shall be ≥5700K, operating on single phase 230V voltage 50 Hz AC supply with voltage range 140-270V. 79 certification for luminare & LM80 certificate for LED shall be produced. including control gear, power factor of control gear shall be >0.90. Crompton model no:LCDSPLN-S-18-CDL/Equivalent model in other approved makes luminaries which meets the above technical specification. LED used in the luminaire should be one of approved make as per approved make list of HAL.

Supply and fixing in flush with the false ceiling testing & commissioning of round type recess mounted LED downlighter with aluminium die-cast body, finish with white powder coating, wattage not less than 18W LED lighting fixture, lumens efficiency ≥ 100lm/w at luminaire level, Colour temprature shall be ≥5700K, operating on single phase 230V voltage 50 Hz AC supply with voltage range 140-270V. LM79 certification for luminare & LM80 certificate for LED shall be produced. including control gear, power factor of control gear shall be >0.90. of Crompton model no:LSCRM-18W-CDL /Equivalent model in other approved makes luminaries which meets the above technical specification. LED used in the luminaire should be one of approved make as per approved make list of HAL.

Supply and fixing in flush with the false ceiling testing & commissioning of round type recess mounted LED downlighter with aluminium die-cast body, finish with white powder coating, wattage not less than 12W LED lighting fixture, lumens efficiency ≥ 100lm/w at luminaire level, operating on single phase 230V voltage 50 Hz AC supply with voltage range 140-270V. LM79 certification for luminare & LM80 certificate for LED shall be produced. including control gear, power factor of control gear shall be >0.90. of Crompton model no: LSCRM-12W-CDL /Equivalent model in other approved makes luminaries which meets the above technical specification. LED used in the luminaire should be one of approved make as per approved make list of HAL.

Supply and fixing on ceiling as per site requirement including testing & commissioning of round type Surface mounted LED downlighter with PDC aluminium housing and high translucent frosted plastic diffucer, wattage not exceeding 12W LED lighting fixture, lumens efficiency ≥ 100lm/w at luminaire level, and lumens output not less than 1200 lumens, effficent heat sink, Colour temprature shall be ≥5700K, operating on single phase 230V voltage 50 Hz AC supply with voltage range 140-270V. 79 certification for luminare & LM80 certificate for LED shall be produced. including control gear, power factor of control gear shall be >0.90. Crompton model no:LCDSPLN-S-12-CDL/Equivalent model in other approved makes luminaries which meets the above technical specification. LED used in the luminaire should be one of approved make as per approved make list of HAL.

Supply and fixing on existing wall / ceiling, testing & commissioning of surface mounting, Box type 1X18W/20W T8 LED Tube light (four feet) Luminaries with minimum lumens output Efficacy of minimum100 lm/W., comprising of white powder coated CRCA sheet steel housing, operating on single phase 230V 50Hz AC supply, built-in electronic driver, LM 79 certification for luminaire. Other standard accessories including necessary inter-connections and supply of 1 No of 18/20W T8 LED Tube, complete in all respects and as directed by engineer-in-chage. Make & model: The LED tube & batten shall be of CROMPTON-IGP161LT8-16.1XT8+LT8-20-865/Equivalent model of approved make luminaries which meets the above technical specification. complete in all respect and as directed by Engineer-in-charge.

Supply, fixing directly to the ceiling/wall using suitable mounting arrangements testing & commissioning of surface mounting Decorative type 10W LED mirror light fitting, including driver, the driver shall have PF >0.9 and Colour temprature shall be ≥5700K, THD <20% operating on single phase 230V voltage 50 Hz AC supply with voltage range 140-270V including necessary interconnections complete in all respect and as directed by EIC. The lighting fixture shall be Bajaj make Model-BCLSB 10W WH/Equivalent make in other approved makes.

Supply and fixing on ceiling testing & commissioning of 20W LED Track light fitting made of aluminium material, operating on single phase 230V voltage 50 Hz AC supply with voltage range 140-270V, including necessary Track light Stanchion & interconnections between driver and lighting fixtures complete in all respect and as directed by EIC. The lighting fixture shall be Philps make Model no-31446 Track light Stanchion Track White 20W Head/Equivalent make in other approved makes..

Supply & fixing on existing MS hook/provide anchor fastener as per site requirement 1200mm sweep, Five star rated with brushless direct current motor(BLDC) Ceiling fans complete with blades, down rods, and accessories, 230V single phase 50Hz AC supply. Minimum air delivery 210cu.m/min with service value 6.00 BEE , erected in position with necessary flexible copper leads of required colour and with canopy, down rod 300mm length as per site requirement , necessary rubber bushings, clamps nuts,bolts etc., complete in all respects and as directed by Engineer-in-charge.

Supply, installation, testing & commissioning of 300mm dia 900 rpm heavy duty exhaust fan of any approved make with louvers, connecting cord with 6A, 3 pin plug top and with all necessary accessories, including making wall openings and replastering to smooth finish with matching paint etc., complete in all respects and as directed by Engineer-in-charge.

Supply, fixing, testing & commissioning of the following factory built powder coated Double door MCB/MCCB DB of any approved make fabricated out of M.S. sheet steel enclosure & necessary cutouts for operating the MCB knobs & comprising of 200 amps tinned copper busbars & earthing bus with tapped holes including internal wiring with stranded copper PVC wires or suitable size copper strips etc. & fixing the DB in flush with wall/ on wall as per site requirement with necessary M.S. angle supports, chipping the wall and replastering to smooth finish etc., wherever required as per site condition, complete in all respects, as directed by Engineer-in-charge and comprising the following as detailed below:

8 way (4 + 24), Vertical Double door MCCB DB

6 way (4 + 18), Horizontal Double door MCB DB

125 A, 415V 36KA, FP MCCB

63 amps. ratings, 4P MCB, "C" curve, 10 KA breaking capacity.

32 amps. ratings, 4P MCB, "C" curve, 10 KA breaking capacity.

63 amps. ratings , TP MCB, "C" curve, 10 KA breaking capacity.

6-32 amps. ratings, SP MCB, "C" curve, 10 KA breaking capacity.

Supply and fixing on wall /on using suitable MS angle iron frame factory-built powder coated sheet metal enclosure including supply & fixing of 1no 63A 4P MCB including Din channel complete in all respects and as directed by Engineer-in-charge.

Wiring for light point / fan point / exhaust fan point/call bell point from nearest switch box with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, fan regulator, modular plate, suitable GI box and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required. (as per detailed CPWD specifications for Group C wiring)

Wiring to single light point controlled by 1 No 6A, 250V gr. flush type modular SP switch complete in all respects.

Wiring to two light point controlled by 1 No 6A, 250V gr. flush type modular SP switch complete in all respects.

Wiring to three light point controlled by 1 No 6A, 250V gr. flush modular type SP switch complete in all respects.

Wiring to Staircase light point controlled by 1 No 2 way 6A, 250V gr. flush type modular SP switch.

Wiring to fan point controlled by 1 No. 6A, 250V gr. flush type modular SP switch including providing 1No box type MS Fan hook in ceiling whereever required, 2 module type electronic five stepped speed regulator etc., complete in all respects.

Wiring to exhaust/wall mounting fan point using 6A, 250V gr. flush type modular SP switch housed along with other lighting switches/separate switch box if required and 3pin 6A, 250V gr. modular type socket housed near the exhaust fan complete in all respects.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 2 X 3 pin 5/6 A modular socket outlet and 2 X 5/6 A modular switch, connections etc. as required

Supplying and fixing suitable size GI Box with modular plate and cover on front on surface or in recess, including providing and fixing 6 pin 5/6A & 15/16A modular socket outlet and 15/16 A modular switch, connections etc., as required.

Supplying and fixing following modular switch / socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

6A Switch

3 pin 6A Socket outlet

Supplying and fixing following Modular base & cover plate on existing modular metal boxes/Modular table etc. as required.

2 Module

3 Module

6 Module

8 Module

Supplying and fixing following size modules, GI box alongwith Modular base & cover plate for modular switches in recess etc. as required.

2 Module

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed PVC conduit as required.

2 x 2.5 sq. mm + 1 x 2.5 sq. mm earth wire

2 x 4 sq. mm + 1 x 4 sq. mm earth wire

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

20MM PVC Conduit

25MM PVC Conduit

32MM PVC Conduit

20MM PVC Flecxible Conduit

25MM PVC Flecxible Conduit

32MM PVC Flecxible Conduit

Telephone

Supply, Fixing, in flush with wall/on wall as per site condition, suitable size modular GI box/PVC box with base plate, glossy front cover for supply and housing of 1 No. of Twin RJ-11 telephone socket outlets with shutter including supply of suitable size modular type GI concealed/open PVC mounting box with base plates, front covers, etc., with necessary interconnections and chipping the wall, replastering to smooth finish etc., wherever required complete as directed by Engineer-in-charge.

Supply & drawing of 0.5 mm dia copper conductor PVC insulated 4 pair colour coded and twisted unarmoured telecommunication cables in the existing PVC conduit as per standard practice including necessary inter connections & end terminations.

Supply, laying in the already excavated cable trench/existing duct/fixing on wall/cable tray/ steel structure using suitable clamps etc./ encasing in pipe, testing and commissioning of 10 pair jelly filled armoured copper conductor of 0.5mm dia polyethylene insulated cover, twisted into pairs, colour coded, pairs laid up, fully filled with petroleum jelly as a moisture barrier, core wrapped with non-hygroscopic polyester tape to contain the jelly, covered with aluminium poly-laminates screen, polyethylene sheath extruded over aluminium screen, polyethylene tape over the above sheath, armoured with galvanised steel tape and outer polyethylene sheath underground telecommunication cable including both end terminations on the existing krone type junction box complete in all respects and as directed by EIC.

Supply & fixing on wall/grouted to floor upto 1200mm above ground level as per site requirement using suitable size MS angle iron frame work finished with two coats of enamel spray paint over a good primer & providing 10 pair krone type telephone connector junction box including krone connector with necessary mounting frame housed in suitable size FRP box with hinged lockable cover complete in all respects.

IT Works

Supply & fixing in flush with existing work station cubical(Modular Table) wire ways cutouts/PVC race ways/Aluminium partition, testing & Commissioning of 2 no's 1 Module RJ-45 socket in Module plate for Two number of Data point including supply base plates, front covers, etc., with necessary interconnections complete as directed by Engineer-in-charge.

Supply and drawing in the existing PVC conduits / wall / above false ceiling, Cat 6 UTP 4-Pair cable including necessary interconnections complete for LAN & Internet point as directed by Engineer-in-charge.

Supply and fixing of floor mounted 42U Network Rack with load capacity of 750kgs or more, Zero U standard Vertical rack mount power distribution unit with 10 Nos. Indian 5/15A Round 3 Pin, 230 V AC sockets, 4nos of fans, 25x3mm earthing tinned copper bus bar, 3point lock, hardware etc. with all standard Accessories, complete in all respects as per technical specification and as directed by Engineer-in-charge. Approved Make: APC/VALRACK/NETRACK/RITTAL/LEGRAND/VERTIV

Supply and fixing of fully Loaded, 48 Port CAT6 UTP Jack Panel, including termination of CAT 6 cables in Jack panel labelling complete in all respects as per technical specification and as directed by Engineer-in-charge. Approved Make: COMMSCOPE TYCO/ PANDUIT/ MOLEX

Supply and fixing of Fully loaded 24 Port LIU fiber LC style singlemode, 19-inch Rack mount panel with adapter plates, fiber pig tails, connectors including splicing and labelling. complete in all respects and as directed by Engineer-in-charge. Approved Make: COMMSCOPE TYCO/ PANDUIT/ MOLEX

Supply and laying in the already excavated cable trench/existing duct/fixing on wall/cable tray/ iron supports/HDPE pipe, of 24 core Single Mode armoured, loose-tube, Gel-filled, 9/125 micron Fiber Optic cable, including OTDR testing and submission of test reports for OFC cable complete in all respects as per technical specification and as directed by Engineer-in-charge. Approved Make: COMMSCOPE TYCO/ PANDUIT/ MOLEX

Supply, fixing and labelling of Cat 6 UTP 4-Pair 1Meter length Patch cord, complete in all respects as per technical specification. Approved Make: COMMSCOPE TYCO/ PANDUIT/ MOLEX.

Supply, installation, testing & commissioning of Door access control systems comprising of card reader & controller, double door Electro magnetic lock(EM), 2nos of Emergency switches, access control power adopter required L & Z brackets, 50nos of programmed card including any other accessoreies for complete fucntion of access control complete in all respect and as directed by OIC/EIC. (Note: Card reader shall be suitable for minimum 100 users.)

Supply, fixing in flush with the table of 8 Module Modular Aluminium Pop-up box for housing of 2x6A sockets, 2Nos Data point, 1No of Telephone point & 1 No of HDMI Port including supply & fixing of sockets, Data point, Tephone point & HDMI port with necessary cutting of table top, fixing arrangements, hardwares etc, complete in all respect as directed by the Engineer-in-charge. Make: Legrand/Equivalent make

Supply and fixing on wall/floor/ceiling/ Aluminium partition /MS angle iron frame, 80 x 50 mm size halogen free PVC Wire way/Cable race way of any approved make, including necessary accessories end caps,tee joints,L bends,reducers, junction boxes etc., as required and as per site condition complete and as directed by Engineer-In-charge etc.

Design, fabrication, Supply, erection, testing & commissioning of Indoor Type LT Panel (PTA)

Design, fabrication, Supply, erection, testing & commissioning of Indoor Type Change Over Panel LT Panel (PTA)

Incoming

2Nos - 63A 415V gr. 4P 36KA MCCB.

1-no 63A 415V gr. 4P COS.

Lot - 200A, 4P, 415V, short circuit rated 36KA for 1sec, Aluminium bus bars with busbar insulators, heat shrinkable PVC sleeves etc.

1Set - RYB indicating lamps of LED module with 6A, 230V,10KA, SP MCB.

1Set- 6A, 230V, 10KA SP MCB for the protection of measuring instruments.

Outgoing

2 Nos - 32A 415V gr 4P 10KA MCB

2-Nos 63A 415V gr. 4P 10KA MCB.

Design, fabrication, Supply, erection, testing & commissioning of LT PANEL (PTA)

Incomer

1No - 400A, 415V gr. 4P 36KA MCCB.

Lot - 600A TP + 300 N, 415V, short circuit rated 36KA for 1sec, Aluminium bus bars with busbar insulators, heat shrinkable PVC sleeves etc.

1No- Multi function meter (MFM/MDM) suitable for 3ph, 4 wire, 240V(L-N), 5A, CL-1, RS 485 Port Digital MFM/MDM of EM6400NG of Schneider or any equivalent make meeting technical specification of above MFM complete in all respect.

1Set of - 400/5A current transformers of class 1 and 15VA burden for metering.

1Set - RYB indicating lamps of LED module with 6A SP MCB.

1Set- 6A, MCB for the protection of measuring instruments.

Outgoings

3 Nos - 125A 415V gr. 4P 36KA MCCB

4 Nos - 32A 415V gr. 4P 10KA MCB

9-Nos 63A 415V gr. 4P 10KA MCB.

Design, fabrication, Supply, erection, testing & commissioning of LT Panel-1 (PTA) for AC Indoor Units Power Point

Incoming

1-No 63A 415V gr 4P 36KA MCCB.

Lot - 200A, 4P, 415V, short circuit rated 36KA for 1sec, Aluminium bus bars with busbar insulators, heat shrinkable PVC sleeves etc.

1Set - RYB indicating lamps of LED module with 6A, 230V,10KA, SP MCB.

1Set- 6A, 230V, 10KA SP MCB for the protection of measuring instruments.

Outgoing

22 Nos - 6- 32A 250V gr. DP 10KA MCB.

Design, fabrication, Supply, erection, testing & commissioning of LT Panel-2 (PTA) for AC Indoor Units Power Point

Incoming

1-no 125A 415V gr 4P 36KA MCCB.

Lot - 200A, 4P, 415V, short circuit rated 36KA for 1sec, Aluminium bus bars with busbar insulators, heat shrinkable PVC sleeves etc.

1Set - RYB indicating lamps of LED module with 6A, 230V,10KA, SP MCB.

1Set- 6A, 230V, 10KA SP MCB for the protection of measuring instruments.

Outgoing

28 Nos - 6-32A 250V gr. DP 10KA MCB.

Supply & fixing in the existing LT Panel at AS-13 substation of 400A 415V TPN 36KA MCCB, with suitbale make adjustable thermal settings(80% to 100%), overload and short circuit releases MCCB of 400A rating to suit for fixing in existing panel, testing and commissioning including modification of bus bars with necessary interconnections complete in all respects as directed by Engineer-in-charge.

Supply & laying in the already excavated cable trench/cable tray/fixing on wall/duct wall with necessary M.S clamps / encasing in pipes etc., testing & commissioning of following size XLPE insulated Aluminium (Al) /Copper (cu) conductor 1.1 KV grade confirming to IS: 7098 ( part-I)/1998 with upto date amendment earthed Armoured (Arm)U.G cables and as per technical specification including stacking at site, proper storage complete etc. as required. (Note:- Excavation, sand & Brick Protection, concrete cutting, reconcreting, casing pipes will be measured separately.)

3.5CX 300 Sqmm LT Aluminium Armoured conductor

3.5CX 70 Sqmm Aluminium armoured conductor

3.5CX 25 Sqmm Aluminium armoured conductor

4C X 10 Sqmm Aluminium armoured conductor.

3C X 4 Sqmm Copper Armoured conductor LT power Cable

Supply and connecting indoor type cable end joints for the following size 1.1 KV gr., PVC insulated and PVC sheathed / XLPE Aluminium(Al)/ Copper(Cu) conductor armoured (Arm) LT UG cables by employing necessary glands, terminals(Al/Cu), bolts & nuts etc., complete in all respects and as detailed below:

3.5 CX 300 Sqmm Al Arm LT Cable End Joint

3.5C X70 Sqmm Al Arm LT Cable End Joint

3.5CX 25 Sqmm Al Arm LT Cable End Joint

4C X 10 Sqmm Al Arm LT Cable End Joint

3CX 4 Sqmm Copper armoured conductor

Supplying and fixing of Hot dip galvanised Perforated type cable tray of following sizes, steel: As per IS:2062 / 1079, Galvanising : As per IS: 2629 / 4759 including all accessories like base slotted angle, horizontal elbow, horizontal tee, horizontal cross, horizontal reducer, vertical elbow up, inside, vertical elbow down, outside, coupler plate, fasteners etc., and duly suspended from the ceiling/fixing to the wall/RCC beam/iron structures upto a height of 3/4mtrs from FFL., complete in all respects and as directed by Engineer in charge

Supply & fixing of 225/200 x 50 x 2mm size Perforated type cable trays with out cover.

Supply & fixing of 225/200 x 50 x 2mm size Perforated type cable trays with cover.

Design, Fabrication, Supply and fixing/grouting in wall/ceiling of suitable size MS angle iron supports/ flat/ brackets for cable tray supports, as per site requirement and painting the same with two coats of synthetic enamel paint over a coat of zinc chromite primer complete in all respects and as directed by EIC/OIC.

Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 A "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.

Supply & fixing of suitable size weather proof Sheet steel enclosure/box with canopy type top for fixing 8 Way Vertical type TPN MCCB DB in side enclosure. It shall have sufficent space for terminating incomming & outgoing cable for fixing DB (Fixing near outdoor AC units). Note:-Vertical DB will be measured separately.

Supply and laying of 63mm dia, PE-100, PN6 ISI marked HDPE pipe confirming to IS 4984:19955 including suitable jointing using welding as required in the excavated trench/duct/at road crossings for encasing cables complete in all respect as directed by Engineer-in-charge.

Earthing

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Supplying & laying 25 mm X 5 mm GI strip at 0.50 metre below ground as strip earth electrode, including connection/terminating with G.I nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of GI nut bolt & spring washer spaced at 50mm)

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.

Supply & drawing/laying of 2C X 6 Sqmm PVC insulated 1100V gr. flexible multi stranded Copper cable with ISI mark for DB's earting using suitable copper lugs including necessary interconnections, clamps & hardwares complete as directed by Engineer -in-charge.

Supply & drawing/laying of 4C X 10 Sqmm PVC insulated 1100V gr. Copper unarmoured cable with ISI mark using suitable copper lugs including necessary interconnections, clamps & hardwares complete as directed by Engineer -in-charge.

Excavation in all types of soil for Cable trench including refilling, consolidating of soil after laying the cable including ramming and levelling to smooth finish as per the Technical specifications enclosed and as directed by the Engineer-in-charge.

Concrete cutting/Chipping/Bitumen Road the existing 1:2:4 cement concrete road /pavements / flooring / rock/stone etc., including removing debris from the work site and depositing in the place as directed by EIC.

Re-concreting the cut portion/closing the dummy cable duct at same area with 1:2:4 cement concrete by employing 20mm graded aggregate granite to smooth finish including curing and form work if any complete in all respects and as directed.

Dismantling & Removal of following items

Supplying, installation, testing and commissioning of micro processor based intelligent addressable main fire alarm panel, central processing unit with the Two loop Panel/modules and capable of supporting not less than 240 devices (including detectors) and minimum 120 detectors per loop and loop length up to 2 km, network communication card, minimum 320 character graphics/ LCD display with touch screen or other keypad and minimum 4000 events history login the non volatile memory (EPROM), power supply unit (230 ± 5% V, 50 hz), 48 hrs back-up with 24 volt sealed maintenance free batteries with automatic charger. Including supply, installation and connectivity of Auto dialer with addressable control module main control panel with minimum 10 telephone nos. connectivity. The panel shall have facility to connect printer to printout log and facility to have seamless integration with analog/digital voice evacuation system and shall be complete with all accessories. The panel shall be compatible for IBMS system with open protocol BACnet/ Modbus over IP complete as per specifications.

Supplying, installation, testing & commissioning of intelligent analog addressable photothermal detector complete with mounting base complete as required and shall comply to BS-5839/EN54/IS2189 standards for installation and product shall be UL / FM / Vds approved.

Supply and installation of PVC type response indicators with LED indications for above false ceiling detectors and shall comply to BS-5839/EN54/IS2189 standards for installation and product shall be UL / FM / Vds approved.

Supplying, installation, testing & commissioning of addressable manual call point complete as required and shall comply to BS-5839/EN54/IS2189 standards for installation and product shall be UL / FM / Vds approved.

Supplying, installation, testing & commissioning of addressable horn cum strobe complete as required and shall comply to BS-5839/EN54/IS2189 standards for installation and product shall be UL / FM / Vds approved.

Supply, laying and fixing directly to the ceiling/on wall / above false ceiling/cable duct/truss etc, testing & commissioning of 2 Core X1.5 sqmm copper XLPE insulated FRLS with ISI mark armoured RED colour LT cable along with required accessories, terminations glands, as directed by EIC to complete the installation as per the technical specification.